Open questions RSS

Here you can see questions asked by other users. If you answer these question, your answers may be inserted into the FAQ.

Date / User Question  
2009-06-24 13:51
Kevin Fraser
Pro Cameras:
Can JVC create and provide for download a zip file of WinFF presets that will correctly convert MOV and MP4 XDCAM EX Long-GOP MPEG2 files to AVI or MOV frame-based files?
Answer
2009-08-12 19:00
Gerald michaels
GY-HD200/250U:
do you have to buy the tripod adapter to put the gy hd200 on a tripod
Answer
2009-09-14 14:25
Paul Wozney
D-ILA Projectors:
Where is the serial number on the DLA -RS20 which I just bought?
Answer
2009-09-22 15:05
Pat
GY-HM700/710/750/790:
Hi, Are clips, files, and SD Ram cards interchangeable between the GY-HM700 & the GY-HM100? In other words, if I was shooting on the HM700, could I then take out the SD Ram card and (without formatting it)put it into an HM100 for further shooting or transfer to an editing system? Thanks, Pat
Answer
2009-09-23 15:39
umberto aguiar
GY-HM700/710/750/790:
If I downconvert to standard dv I have two audio tracks mono, but if I am on HD they are stereo, two tracks linked. But I think that, on mac 10.5, these tracks were not linked. Is this happening and has anything to do with snow leopard?
Answer
2009-09-26 21:57
James Lea
GY-HM150/100:
Is there a way to get live video from the camera into the computer via USB - so that the camera can be used by Skype? For the past couple of months, I have been doing live shots over Skype for some of my network TV clients using a Mini DV camera. Now, I need to acquire footage in HD and would like to only have to carry one camera.
Answer
2009-09-27 17:11
Derek
GY-HM700/710/750/790:
I recently purchased the GY-HM700U. I'm very happy with it. Had the pleasure of shooting 3 jobs with it and love the work flow. Working on FCP 6, the one thing I'm finding is all the clips are stereo. Is this normal, is there a setting on the camera or on FCP imports?
Answer
2009-09-28 07:51
James Albee
Pro Cameras:
Is there a faster way to reset the timecode to zero on the GY-HD250 other than going through the menu and manually rolling back the time?
Answer
2009-09-30 19:00
Paul Evans
GY-HM150/100:
Videos play on the camera, but when I go to transfer them to my MACpro they are no where to be seen. Just super small 30 sec clips are visible. I recorded in MP4 mode. Same result on my PC. Several short clips are created. Recorded about 1.5 hours and it all plays on the camera, but not found on card. Is there some protection mode selected I'm unaware of? I see two yellow flags on the camera clips.
Answer
2009-10-04 16:45
Bobby Kuykendall
GY-HM700/710/750/790:
I have purchase the s&s card reader to unlock the mp4 recording format, but i am having trouble getting the cameras timecode to work with the mp4 format. Please help.
Answer
2009-10-06 19:16
Paul
GY-HM150/100:
Hello, how can I connect an external field monitor while making certain that the image on the monitor is exactly the same as what's being recorded.
Answer
2009-10-15 13:22
Robert Schultz
Pro Cameras:
When I playback video on my JVC jy hd-10 the video is fine,but when I put the dv tape in my deck it shows a colorful fuzzy image with no sign of what I shot. What problem could this possibly be?
Answer
2009-10-16 15:38
Andrew Adkins
GY-HD110U:
I switched from 30 to 24p mode and shut the camera down when it was requested, but now the camera will not reboot and the HDC/DV and VTR lights flash with a warning noise coming through the ear piece. Any help would be awesome, Andrew
Answer
2009-10-17 00:55
warren Elliott
GY-HM150/100:
what is the codex for the firmware update, I can't open it and how do I transfer it from the pc to the sd card? is there a hardwire system or metord from pc to camera or do i need to buy a new piece of kit? I use apple macbook pro and finding this frustrating.
Answer
2009-10-23 18:42
M Valentine
Pro Cameras:
RE: JVC GY-HD200UB. I am considering purchasing one of the JVC Professional HDV cameras like the GY-HD200UB or the GY-HD250U. However, various customers on video BB complain about compatability with Final Cut Pro v6 and up, timecode errors, dropped clips, etc. Is there data on the JVC site that discusses FCP compatabity issue with JVC tape formats. Thank you.
Answer
2009-10-25 03:11
Dafne
GY-HM150/100:
Is it possible to edit in Adobe Premiere pro Cs3 or Sony Vegas Pro 8.0 ? Will it work as good as having it edited in Final Cut Pro ?
Answer
2009-10-28 20:07
ND
GY-HM150/100:
Does the camera create Quicktimes in XDCAM HD 422 1080p25 CBR format? I need this file format so the media complies with the media created by the other cameras on this multi-cam shoot.
Answer
2009-10-31 04:31
Warren Elliott
GY-HM150/100:
I have data sitting in PROHD Manager, and on the SD card in the camera. I have also uploaded and installed the plug in LST0874-001a for Final cut pro. My version of which is 6.0.6. However. I can neither import the MPEG -4 files as from ProHD which they are recorded in or neither will FCP pickup the data on the card via a card reader through usb port, nor via the usb port on the camera with set for play back on PC. Can you hep pleas
Answer
2009-11-05 14:13
fizaine
GY-HM150/100:
Hi, I'm working with Final Cut Pro 6.0.6 and a PPC G5 Apple. Can you tell me how to export my finished movie from FCP to sdhc card which can be read by my HM100 (structure BPAV) Thank you very much. Jean-Pierre
Answer
2009-11-09 09:23
Lionel DesRoche
GY-HD110U:
I see that the MP4 file care compatable with Adobe Premiere CS4, but I only have CS3. Will I need to upgrade to CS4 if I were to purchase this camera?
Answer
2009-11-10 14:47
Bob Seeley
GY-HD200/250U:
Is there a recomendation for minimum lighting for indoor use for the GY-HD250UAB camera w/ standard Fujinon 16x lens?
Answer
2009-11-11 06:44
David B
GY-HM150/100:
Guys, you have now sold many of these cameras to loyal followers. We love our cameras but see some easy flaws to fix via software updates. Spending 4k on a camera in this economy takes a leap of faith that you wont be stranded w/o a steady stream of improvements. I appeal to your team to please take action on the many suggestions on how to improve this camera being posted in forums. Release a significant software update for us!! - if you do, we will be customers for life.
Answer
2009-11-11 16:39
Jaime
Pro Cameras:
Do you have to own the KA-UM100G adapter (sold separately, according to the manual) in order to install the SXS Memory Recorder (KA-MR100G) on a JVCGYHM700UXT Camcorder? Thanks!
Answer
2009-11-12 23:51
Camrin Petramale
GY-HD110U:
I m interested in shooting time lapse with my JVC is it possible to slow the rate down to a frame a second.
Answer
2009-11-17 11:12
Federico Maria Robatto
GY-HM150/100:
What is the best Easy SetUp for FCP 7? Thanks.
Answer
2009-11-18 03:58
Thomas
GY-HM150/100:
Dear JVC-Team, I want to do a Livestream Broadcast with my JVC GY HM100. For that, I need to connect the camera live with my mac. But it seems it is not possible to get a direct signal as I would with a Firewire-camera. Is there any driver that makes the JVC GY HM100 be able to directly connect with Quicktime Broadcaster, Skype etc.?
Answer
2009-11-18 09:00
Jeff Olson
GY-HD110U:
I have two GY-HM100U cameras purchased a few months ago from Alpha Video here in Minneapolis. I have a BR-HD50 deck also from Alpha over a year ago. I am running FinalCut 6.0.6 I would like to acquire with the 100's, edit with FCP and use the deck for archiving finished projects "print to Tape" or however you suggest. I have yet to ever see any video out from the deck of the footage shot on the 100's. Can you give me some pointers or step by step instructions about setting up my work flow? Thanks, jeff
Answer
2009-11-18 16:12
Kostas
Pro Cameras:
I have recently purchase the camcorder everio GZ-MG645BEK. I recorded with it with ultra quality and when I tried to export the videos in my hard disk the resolution of all videos was 4:3 but it should be 16:9. Can someone tell me how can I export the videos with 16:9 resolution?
Answer
2009-11-21 19:40
Steven Ackermann
Pro Cameras:
How can I use my JVC GY-HM100 as a webcam on Skype? And, will Skype see embedded audio?
Answer
2009-11-22 16:37
Pierre Repond
GY-HM700/710/750/790:
I have a white pixel. How can I fix it? Thanks!
Answer
2009-11-23 14:52
Jeff Fabrizio
GY-HM700/710/750/790:
How can I record two seperate audio channels, each on there own input. They come out as stereo pair.
Answer
2009-11-27 21:18
Jeff
Pro Cameras:
Do you sell the multi-pin component cable separately? I seemed to have misplaced mine, and now need it for and external reference monitor. Thanks!
Answer
2009-11-30 09:56
Bo Warmbold
GY-HD200/250U:
Camera shows record inhibit even when the record inhibit tab is not slid closed
Answer
2009-12-02 12:59
Pablo FreeSpirit
GY-HM150/100:
On the GY-HM100, if I shoot to the MP4 codec, can I drag directly to the Premiere time line without any transcoding, rendering, or format conversion? Is it just as fast as going from .MOV into Final Cut?
Answer
2009-12-02 13:00
Pablo FreeSpirit
GY-HM150/100:
What happens in the GY-HM100 if I use code 2 or code 4 SDHC cards?
Answer
2009-12-03 16:37
Morgan
GY-HM150/100:
What are the system requirements for this camera. Can i run full resolution on a new imac 27?
Answer
2009-12-06 00:08
Leland Talbert
GY-HD200/250U:
There is a image from my HD250U that looks like ghost images one is off white, the second blue and the third slightly yellow. If I press the focus assist the ghost image goes away in the viewfinder but still ghost on the output.
Answer
2009-12-07 04:56
Rune Koldborg Jensen
Pro Cameras:
Hi JVC, I have a problem regarding Dead Pixels. I have realized, that there is a small white (dead) pixel on the footage I've made with the GY HM-100 AND the 700 model. There should be a fix for this, at least for the 700 model (and I haven't tested it out yet) and apparently it should be due to overheating? Is there a way to get rid of these white pixels? Just for your information, then the cameras are newly bought, less than 3 months ago. Thank you so much
Answer
2009-12-08 12:33
Jeff Steinborn
Pro Cameras:
I have a pixel out on my GY700 camera...in the advanced function menu how do i activate pixel compen det
Answer
2009-12-10 19:23
Steve Golden
Pro Cameras:
I teach documentary filmmaking at Columbia College and we use your GY-HD100. I would like to have students give me their SD cars so I could review them at home and also view them in class. Sony, Panasonic, and the Red have free downloads so one can view their cards, does JVC have anything like that or do I have to buy a third party app? I have downloaded VLC Media Player which seems to work fine for MP4 but I have not found any way to view .MOV expect Calibrated{Q} XD Decode which is $80.
Answer
2009-12-11 08:48
Ezequiel
Pro Cameras:
Hello i want to know what is the difference between GY-HM700L17 and GY-HM700U model. Best regards.
Answer
2009-12-16 04:03
Boris Koning
Pro Cameras:
When recording on jvc gy-hm100 in 1920 x 1080i50 mov.s are not playing fluent in fcp 6.0.6 What's wrong?
Answer
2009-12-18 14:33
Jake
GY-HD110U:
I get that the GY-HD110U has a 10X optical zoom. My question is, does it have digital zoom. And if it does, how much?
Answer
2009-12-21 12:08
Brenden Martin
Pro Cameras:
i have jvc hdgy200 for the last 7 months and my veiwfinder is freaking out. It looks like a short in the cable the vw freaks out in low light or any change to light in auto or manual. It does not record the static in the vf it just show up when i shoot with it. Also my fujinon lens that comes with the cam has what looks like a pixel out. It is a out of color dot in the middle of the lens and it does show on during play black. What do I do?
Answer
2009-12-21 23:48
Kevin Fraser
Pro Cameras:
What are typical applications for the white point 'red' and 'blue' settings?
Answer
2009-12-24 00:36
KC
GY-HM150/100:
Dear Sir/Madam: Can the JVC ProHD Clip Manager (bundled with the GY-HM100) use to cut a part of movie from the media file xxx.MP4 in the PC harddisk? and combine media files to one? Can this program converts output file to other format eg. avi mp2 ?
Answer
2009-12-24 01:43
Michael
Pro Cameras:
Can the GY-HM 700UXT camera's firewire out put allow me to record video from the camera to a DVD recorder? Also, can the date & time stamp be made visible using firewire to record onto a DVD recorder? Thanks. MICHAEL, N. Hollywood, CA
Answer
2009-12-24 11:00
Scott Erlinder
GY-HM700/710/750/790:
I'm planning to buy a number of 700's for our main production camera, but am concerned about the HD SDI output. For green screening, I want to get the highest quality out of the camera and was considering the AJA Ki-Pro recording from the HD SDI output. 2 things: 1) Is the HD SDI sending audio stream as well? 2) Does the 700 put out recognizable frame rate flags in the SDI output? Thank you!
Answer
2009-12-27 03:47
Luca Colarelli
GY-HM150/100:
it's possible to adding filter?
Answer
2009-12-27 09:14
Wayne
GY-HD110U:
Hi: I edit in Edius and I wanted to know if I get the JVC GY-HM100 can I export the footage in full screen so I dont have the HD black bars in a standard TV? Thanks
Answer
2009-12-27 15:02
Bob Garon
GY-HM150/100:
Why is it that I cannot download from my camera to Final Cut Studio? I am using a USB cable. My IMac, which is a Mac OS X with a 2.4 GHz Intel Core 2 Duo does not recognize the JVC/Pro. The MAC OS X is a 10.6 Snow Leopard. Please help. Thank you. Bob Garon
Answer
2009-12-28 12:20
Ron Retzer
GY-HM150/100:
Is there (or will there be) a tele converter lens available for the GY-HM100U?
Answer
2009-12-30 13:06
Bob S
GY-HD110U:
Does the camera record both date/time and running time code in a window on the screen?
Answer
2010-01-04 18:31
Wendy Bancroft
GY-HM150/100:
How compatible is the gy100 with Sony XDCAM EX1 in terms of colour (I frequently shoot with someone who has the Sony camera).
Answer
2010-01-06 08:19
Mike Fitzgerald
GY-HD200/250U:
I am looking for the CCU Unit for our HD 200 camera. I have been trying to buy to NO AVAIL the RM-LP57U Is there another unit available for CCU Functions for this camera.
Answer
2010-01-06 20:36
Mark
Pro Cameras:
GY-HD250U: I have 3 Cams, and 2 of them have bad/dead/white pixels. I need to know how to mask them black, or how to run a pixel correction process.
Answer
2010-01-09 02:34
Chip Staley
Pro Cameras:
Since this camera would be used strictly for video depositions, is it possible to have the timecode superimposed onto the composite output so that I can burn a DVD in real time?
Answer
2010-01-12 10:29
pascal
GY-HM150/100:
what are the diference between GY HM100E and GY HM100U?
Answer
2010-01-13 13:57
Shah
GY-HD200/250U:
Hi I have a GY-HD200U-B camera. The issue I have is that whenever I tried to capture video (720p 60p) from Adobe Premiere, I am unable to capture. Do I have to install anything on my PC? Regards Shah
Answer
2010-01-16 12:48
bill logan
Pro Cameras:
how do i scrub the memory card on the GY-HM100U?
Answer
2010-01-21 08:24
mike cruz
GY-HM150/100:
What is the best way to transfer the captured video to be play back on a company's intranet. Editing the video using Adobe Premiere or Adobe Media Encoder to create the FLV file. We currently have a Flash Media server to streamline the flash file as well. Thank you for your support.
Answer
2010-01-22 09:23
FABIO
GY-HM150/100:
How to connect gy hm 100 to a macbook pro for live streaming? I would like to know which is the best way to connect my Gy Hm100 to my macbookpro intel core2 duo in order to make live streaming. (in other words to use the hm 100 as a webcam) I tried to connect via usb 2.0 but it seems to work just to store video files in the computer hard disk. How can i deal with the video outputs of gy hm 100 and my mac without using a third part device? Many thanks
Answer
2010-01-23 18:21
Victor
GY-HD200/250U:
One of our GY-HD200U cameras has a green line that appears every few seconds and the video is sent for live production using the composite output. Any ideas why might be causing it?
Answer
2010-01-24 01:18
Mirek
GY-HM150/100:
Hi our JVC GY-HM100E cameras cannot read 32GB Sandisc 10 class. It is card recommended by You .and we purczased several quite expensive cards .What is Your solution ? New Firmware ? Please answer because our busines is not willing to accept such huge loss. VeyFilm GHMB
Answer
2010-01-24 16:15
Jon LeBlanc
Combo Decks:
I have a JVC SR DVM600. The DVD drive is not recognizing DVD-R sometimes. If it does the record or dub process from HDD ends after few minutes. Using Quantegy DVD-R Ver 2.0
Answer
2010-01-31 12:41
kate
GY-HM150/100:
after shooting with cam set at .mov, i open card on computer but have no bpav file, just the clip folder. 2nd problem is when looking at a clip through quicktime pans have a definite stutter. optic stablizer is off. same clip in fcp, the pan plays fine but after quicktime conversion and playing through quicktime, the pan again shows the stutter. can anyone help? thanks!!
Answer
2010-02-01 09:11
Chad Johnstone
GY-HM150/100:
Are there 3rd party zoom / focus controls for tripod use available?
Answer
2010-02-04 21:17
Roger
GY-HM150/100:
What is the closest focus under normal operation in wide field? Is this distance shortened if the tele-macro feature is on and if so, what then is the wide field close focus distance? When Tele-macro is on, will the camera still focus to infinity? I take it that there is no macro capability except for the telemacro feature - correct? Thanks.
Answer
2010-02-08 09:12
arturo Perez
GY-HM150/100:
Can you use a SDHC class 10 card with this camera ?
Answer
2010-02-09 09:08
Dejan
GY-HM700/710/750/790:
What type of microphone is shiped with GY-HM700? What are specifications?
Answer
2010-02-10 15:20
Russj
Pro Cameras:
Will the HM-700 be firmware upgradable to the new SDXC memory cards?? or firmware upgradable to write 4:2:2 video to SDXC or SDHC cards??
Answer
2010-02-10 16:59
Rod Miller
D-ILA Projectors:
I have the RS1 and have started to loss the picture to a blue screen with the error msg the HDMI signal is out of range. I get this watching cable and not when watching DVD's. I have firmware version 62 installed. I'm going thru a switcher and connected the HDMI directly and got the same errors. This usually happens after the projector has been on for 10-15 minutes.
Answer
2010-02-12 09:36
Mike Hall
Combo Decks:
I have a SR-DVM600U and since the time we bought it it will not read DVDs (positive there is nothing wrong with the DVDs). It just sits there with a black screen. If you push the play button, it says it is unable to read the disc. We have not been able to send it in for inspection or repair, because we rely to much on it to record to DV Tapes. Any suggestions?
Answer
2010-02-13 13:49
Ken
Pro Cameras:
Can I use a Varizoom remote zoom controller on my JVC GY-HM100 or is there some other remote zoom controller that works with this camera?
Answer
2010-02-16 12:04
KJ Pugh
Pro Cameras:
I just bought a GY-HM100U, but am now finding out that I will need to update both my FCP to v.6 and my Mac OS to 10.5 to use it. The software that came with the camera will will not work of OS 10.4. Is there any third party video editing software that will work on OS 10.4?
Answer
2010-02-16 13:05
Tammy Shelley
Pro Cameras:
My SR MV-40 continues to be "LOADING" after several hours. I have attempted to unplug it and it comes back on immediately "LOADING".....
Answer
2010-02-16 14:22
gary
Pro Cameras:
the diffrence between the hd550 and rs 15u
Answer
2010-02-17 06:36
alberto
Combo Decks:
hello, im a technician working for a television station here in Suriname we have a jvc sr-dvm600 which wont come up. says "please wait" all the time. i can hear the hard drive spin but not normal. hdd crash. how can i replace this one with a new one ? are there files (startup files) in the old drive? how can i copy these files to the new hdd to let it work? regards, Alberto
Answer
2010-02-17 17:30
Dennis
GY-HM150/100:
Can JVC upgrade the frimware to improve the Zoom control on the lens ring and provide a Min & Max zoom rate in a menu setup? I own the HM100 and fixing this would make me very happy and I assume many other also. This seems to be one of its few major disappointments. Thanks Dennis
Answer
2010-02-18 07:33
howard
GY-HM700/710/750/790:
How do you capture HD from an HM700 to final cut Log and Capture? I can capture DV but when i flip the switch to HD it no longer sends signal. thanks
Answer
2010-02-18 14:59
P Gray
GY-HM150/100:
I have just brought the HM100. The SanDisk Extreme III 8GB card that comes free with it works a treat. However, two new 16GB Verbatim SDHC class 6 (pro series) formatted on the camcorder don't. They will only record photos, not videos. What's wrong?
Answer
2010-02-19 07:55
Sub
D-ILA Projectors:
I own several RS1 projectors. Recently (only about 100 hours of use, but they are about 1.5-2 years old) they make a light pulsating buzzing sound when turning them on, and they will not fire up. Sometimes I can get them to shut down via the top panel, but sometimes its unresponsive and I have to pull the plug. It feels like the power supply is going. Is this possible? Whats going on?
Answer
2010-02-19 21:31
Brian
GY-HM150/100:
I understand the manual iris control for GYHM100 clicks to f stop settings instead of infintely variable...Are these full fstop clicks or are they every half f stop?
Answer
2010-02-22 21:11
Austin Smith
Pro Cameras:
When I put my card in I recieve a message that says, "RESTORE MEDIA [A]." How do I fix that. Oh yea, I'm using a GY-HM700.
Answer
2010-02-23 15:30
Robert Ciavatta
Pro Cameras:
Can the JVC GYHD200U record 16:9 in standard definition?
Answer
2010-02-26 09:29
aldir mendes
Pro Cameras:
Which one of jvc is better to shot a documentary and Why?
Answer
2010-02-27 15:42
Steve
Pro Cameras:
I have a SanDisk 16GB Class 10. I've formatted it and it just gives me a 00:00 reading for recording time. It works for taking photographs. Am I doing something wrong?
Answer
2010-02-28 05:52
Kathy Ploss
Pro Cameras:
Can you please send me the process to change the BHL5009-S bulb in our projector... I replaced it and it will not reset or come back on... Thx
Answer
2010-03-01 03:09
saada
GY-HM150/100:
yesterday ibought the above product from oasis in dubai, will this work with my pinnacle video editing software
Answer
2010-03-01 07:38
Jason Pierson
GY-HM150/100:
Can I use the video we shoot with the i movies some how? And what would be the best way to convert you Files to an SD file without FCP
Answer
2010-03-01 14:38
Mary Scheaffer
Combo Decks:
I am looking for VHS/DVD player. I want it to be a very good one with TBC and Proc-amp with the many color, brightness,hue, image sharpener/enhancers for detail,& jitter preventer. I want to transfer old family VHS tapes to DVD. I may use a DX2 converter to put them on the PC. I am a novice, but want the best quality that I can get out of the tapes.I have read that the first "best step" would be to start with a very good VHS player such as JVC. Can these steps be done? Which combo deck is best? Thanks so much Mary
Answer
2010-03-02 04:54
Paul Wright
Pro Cameras:
I have just bought a JVC GY-HM100EC. Can you confirm that the GY-HM100EC is the same as the GY-HM100E so I just need to fit the ac plug adapter to the power cable.
Answer
2010-03-05 17:04
Michael Bailey
GY-HM700/710/750/790:
Are there any SxS adapters (to utilize SDHC cards) known to work in the KA-MR 100? I know there's an earlier post dated almost a year ago saying no.
Answer
2010-03-08 10:46
Steve Ross
D-ILA Projectors:
I am about to purchase a projector. What are the plans for 3-D capable models? Will there be an outboard unit to use for the DLA-RS35U/DLA-HD990?
Answer
2010-03-08 10:50
Steve Ross
D-ILA Projectors:
I am about to purchase a projector. What are the plans for 3-D capable models? Will there be an outboard unit to use for the DLA-RS35U/DLA-HD990?
Answer
2010-03-10 00:00
brett
Pro Cameras:
is the hm100 the replacement for the gz hd7?
Answer
2010-03-16 11:55
Warren
D-ILA Projectors:
hi, i wanted to get some more detailed information about the rs20 projector. Specifically, I want to know how the brightness output changes at different zoom settings(for different throw ratios). Thanks.
Answer
2010-03-16 12:01
Warren
D-ILA Projectors:
hi, i wanted to get some more detailed information about the rs20 projector. Specifically, I want to know how the brightness output changes at different zoom settings(for different throw ratios). Thanks.
Answer
2010-03-17 12:06
alan hotchkiss
Pro Cameras:
I know you say the Canon 14:1 lens boasts minimum chromatic aberration, but I'm seeing plenty of it with my 700u. Seems abnormally high with this camera. I even switched the Canon out with a Fujinon lens that came with our JVC HD-GY 200 (which rarely if ever had this problem) and it to caused the 700u to produce excessive color fringing. So, if this may not be specific lens issue, is this something correctible in-camera, or a defective camera all together? I've already changed the Detail factory default setting to minimum.
Answer
2010-03-17 15:13
Wayne Orr
GY-HM150/100:
I have tried to update my camera with the firmware using the instructions that downloaded with it because I have class 10 cards but I am getting stuck on the update procedure. When I get to step 8, I can't get to step 9. The updated version is not displayed but rather I am sent back to the FORMAT menu. I have tried using Class 10 and also normal SD cards. Is there any step that I am not following exactly?
Answer
2010-03-17 17:06
Pierre Weidemann
Pro Cameras:
Somehow someway the DC power input on the back of my HM100 seems to be cracked... (seems)... how i dont know... the camera still charges the battery through it ... but the access light does not come on and i cannot run the camera on straight DC connection... i have no idea how the little plastic frame could have cracked... is this common? I dont wanna be without the camera for more than a 3 or 4 days ... what do you recommend... seems odd this should crack... unless it isnt cracked .. seems so though...I am in NY... I know the HQ is in Wayne NJ can they handle the issue there? pierre
Answer
2010-03-17 17:10
Pierre Weidemann
GY-HM150/100:
Will the HM100 get a firmware update (does it need one) to handle the SDXC 48/64GB cards? I know the 104 standard, of course Type 6/10, and SD 3.0 would seem to be able to work in the camera? Pierre
Answer
2010-03-19 17:44
Anna Bertani
GY-HM150/100:
I am trying to connect two wireless microphones but the camera doesn't recognize them. It keeps the built-in microphone. I followed all the steps: connected the mics in the XLRs inputs, turned on the microphones (that are working normally) and nothing. Can you help me?
Answer
2010-03-22 11:15
Ken
GY-HM150/100:
Novice question: Will the GY-HM100u work with iMovie 09'?
Answer
2010-03-24 23:12
Robert Malahowski
GY-HM150/100:
Are the CCD's on the GY-HM100 native 1920x1080 resolution or is interpolation occuring to achieve the 1920x1080 resolution?
Answer
2010-03-26 11:01
Mike
Pro Cameras:
I heard a rumor that JVC was working on software to allow the gy-hm700uxt to record at 50mbps on the sxs card. Is there any merit to the rumor?
Answer
2010-03-26 18:22
Mike Bailey
Pro Cameras:
How do you set the Ka-mr100g to under crank or over crank?
Answer
2010-03-30 16:10
Pat
GY-HM700/710/750/790:
I'm trying to understand how the GY-HM700 proceess video. I've seen that it uses the XDCamEX codec (Encoder/De-encoder) for compression, but MPEG2 is also refered to. I thought that MPEG2 was an encoder. Are these the same thing? Is one a file format and the other a codec. Is one "Intra-Frame", and the other "Inter-Frame"? Is one maybe for .mov, and the other for .mp4? I havn't been able to find much information anywhere, even on the Sony site. Thanks for any help, Pat
Answer
2010-03-30 16:22
aaron
Pro Cameras:
how do i get the files to record at 60p? i think they are set there, but when i go to import them the format is only half that. is there an issue with importing them specifically into Final Cut Pro? Thanks.
Answer
2010-03-31 09:57
Jason
GY-HM150/100:
I have a new GY-HM100U that I want to use for streaming video. Without firewire how do I get my computer to recognize the camera as a video source?
Answer
2010-04-01 11:46
Graham McGlashan
GY-HM150/100:
Hi, Are there any 2x or 3x tele extenders available for the HM100? thanks Graham
Answer
2010-04-02 02:43
Mete Darcan
Combo Decks:
How can we connect sr-dvm700 to a pc? I connect via iee1394 connection, pc recognizes the device but cannot find any driver. Can you help me with this?
Answer
2010-04-02 07:11
Dennis Keeling
GY-HM150/100:
How do we get spanned Quicktime clips off of 2 SD cards recorded on the GY-HM100 and turn them into 1 Quicktime movie? We are seeing a problem with the clips if we just pull them straight off of the cards. The first half plays ok, but the 2nd doesn't. Both play fine in the camera.
Answer
2010-04-05 17:47
Pat
GY-HM700/710/750/790:
I noticed that the New GY-HM790 Studio Version of the GY-HM700 is now listed on the Website. Congrats. In the photos and description it lists a genlock input, and Time Code In/Out. That appears to be a seperate add-on module. Will that module or the Studio Back be available for the GY-HM700? Thanks, and again Congratulations, Pat
Answer
2010-04-06 16:42
Ann Johansson
GY-HD110U:
If I record audio using two microphones, say the shotgun mic for Input 2 and a lapel mic for Input 1 should I get two separate audio tracks when I open up the .mov file in Final Cut 7? It seems I should but I am only getting one audio track. What am I doing wrong? Thank you! Ann
Answer
2010-04-07 10:39
Ann Johansson
GY-HM150/100:
Hi, Why is the camera not recording in stereo? What am I doing wrong? Thanks, Ann
Answer
2010-04-07 19:37
Scott
Pro Cameras:
We have a bunch of new 700's and I was curious as to why/when you would shoot 60p when not in the slow motion setting?
Answer
2010-04-08 12:09
Mariano Dominguez
GY-HD200/250U:
When i am shooting with the GY-HD200 i notice on my playback monitor that it is grainy. Why is there grain on my image? is there a specific setting that i need to set in order to shoot and have the best HD image?
Answer
2010-04-08 17:23
Jaroslaw Widomski
GY-HM150/100:
1) If I buy this camera in US, can I use the provided charger in Europe (France, Germany) at 220V as well ? 2) Is there any difference between the models GY HM100 and GY HM100U Best regards
Answer
2010-04-09 12:03
Stuart Thomson
GY-HD200/250U:
Is there an improved version of the viewfinder for the GY-HD200? The original one is pretty much useless for shooting golf balls in flight.
Answer
2010-04-10 20:19
Craig Ratz
Pro Cameras:
We use several JVC 250U cameras with the studio configurations. We tried moving these off multicore for a different location shoot and could not get the VF-P400U viewfinders to show an image from the cameras. We have our KA-HD250U plugged into a regular power supply and the camera viewfinder output is feeding the KA-HD250U and then it feeds the viewfinder. Any idea why the viewfinder does not seem to power up or show picture? Thanks, Craig
Answer
2010-04-10 20:25
Sam Schachter
Pro Cameras:
My JVC GYHD200 is dropping frames when I capture in FCP. Actually, it looks likes it's doing it in the camera. Why? This is new. Did I change a setting somehow or do I need it serviced?
Answer
2010-04-16 10:55
Steven Noh
GY-HM700/710/750/790:
Hi. Just wanted to confirm the length of the GY-HM700, starting from the front edge of the Canon 14x lens to the back edge of the Anton Bauer Dionic 90 battery. Would like to order a Pelican case at the same time I order the camera. And if you have a suggestion for case size/type/etc., would be happy to hear it. Many thanks.
Answer
2010-04-17 07:09
Alex Egido
2D-3D Converter / Processor:
Is posible work with signal SDI in PAL format .... or only HD signal Thanks
Answer
2010-04-17 09:11
wiili engl
GY-HD110U:
HELP! managed to get the camera into MENU LOCKED. How do I get it off? (and how did it get locked to start with?). It will only record Dv 50i, and non of the menu settings can be changed. Thanks for advice!
Answer
2010-04-20 13:18
Clover Carroll
Combo Decks:
Will Adobe Premiere Pro recognize the SR-DVM600? Can I capture all my Mini DV tapes to my hard drive with the SR-DVM600? Thanks Clover
Answer
2010-04-22 07:56
Neal Harris
D-ILA Projectors:
What fixed type projector screen do you recommend with the RS-35?
Answer
2010-05-01 23:21
jack gronlund
GY-HM150/100:
How does the lens on the JVC GM 100 compare to the lens on the SonyHDR AX 2000, they seem to have a wider angle lens - Thanks
Answer
2010-05-07 10:45
Jason Pierson
Pro Cameras:
Im trying to record a live feed from my JVC GY-HM100U from the video output and the screen display info is in my video. How do i go about getting rid of the screen info on by video.
Answer
2010-05-10 05:49
Evan
Pro Cameras:
What are the functional differences between HM100U (US version) & HM100E (European version) They both seem to support "Video Frame Rate seetings - NTSC AND PAL" - as per brochure. So they can both record Full HD 1920x1080 (35 Mbit/s) in either 59.94i or 50i?
Answer
2010-05-12 14:19
Robert
D-ILA Projectors:
When are you going to fix the Clear Motion 120 problems on your current DILA projectors so that owners of these projectors can watch Bluray discs with the feature turned on without the picture going to crap.
Answer
2010-05-16 12:09
steve watson
Pro Cameras:
what do i need to upload the captured video shots taken on the 100e to the MacBookPro using Final Cut Express
Answer
2010-05-16 16:39
Chris
Pro Cameras:
I can't get component video output to work, I want to downconvert, view downconverted 480x720 4:3 on an external HDTV that takes component in, and can't seem to get any video showing up using component out. Tried changing specified menu settings, HDMI out works fine but thats HD, Anyone know to to fix this? Thanks.
Answer
2010-05-17 09:26
Pat
GY-HM700/710/750/790:
Hi, The documentation for the GY-HM700 lists the Anton Bauer Dionic 90 for battery power, however we have a number of AB Hytron Batteries, can they be used with the GY-HM700? Thanks, Pat
Answer
2010-05-20 04:16
Muhammed mizan
GY-HM150/100:
am intending to buy a GY-HM100U from USA and will be using it in Asia where PAL is the system. Is it possible to use the footage in PAL NLE Editing system? If GY-HM100U and GY-HM100E both are multiformat camcorders then what really is the technical difference between them?
Answer
2010-05-20 17:42
Joanes
Pro Cameras:
Hi. I am able to drag and drop my MP4 clips into Final Cut 7 without any problems. However, I am editing an HD project and I am having problems editing in 1080P. Final Cut defaults to a 1080i frame size. Can you advise which Codec I should be using? Please feel free to contact me at our office at 718-210-3652. Thank you much. Joanes.
Answer
2010-05-21 06:35
ta Colvard
Combo Decks:
How might i go about remotely controlling an SR-DVM700U. I want to use a wired remote; preferably using the RS232 port. Is there a desktop unit to accomplish this? or possibly software for PC or MAC to "talk" to them?... I own two(2) units. I run a Home Shopping Network-esque satellite network, and independant playback by seperate controllers are imperative.
Answer
2010-05-21 18:58
dave
Combo Decks:
I use a SR-DVM700u for playback in a high school broadcasting studio. We like to take mini DV tapes, queue them up for playback when needed. However after a minute or two the VTR goes to sleep and "no signal" is displayed. How can set the VTR to not go to sleep. Thanks, Dave.
Answer
2010-05-23 18:47
Heng Lu
GY-HM150/100:
Dear JVC, I got my GY HM100 for just 1 week, but there's 2 white pixel appear on the footage when I record it on manual mode. Is there a setting on the camera I can change o to fix the white pixel problem? Thanks! Heng
Answer
2010-05-24 07:16
Phillip Powell
GY-HD200/250U:
I purchased an GY-HD250 Studio camera and would like information on the rebate that was offered. I mailed in the rebate forms and have not received a confirmation.
Answer
2010-05-26 04:22
Sree
D-ILA Projectors:
What screen properties do you recommend for the projector ? (white vs silver/high contrast/high brightness) The room is dark with no ambient light and the screen will be about 135-140 inch.
Answer
2010-05-26 08:27
jeff
Blu-ray Recorders:
Are all of the blu-ray units limited to recording 720p?
Answer
2010-05-26 15:43
brian Clausman
D-ILA Projectors:
I had a message on my screen to replace bulb in my home theater projector. In addition, there was a red light on the bottom of the unit saying lamp, and red light. We replaced bulb and red light is still showing, as well as message on screen to replace bulb. Is there a re-set that needs to take place after replacement or something else we need to know to remove the messages??? Thanks
Answer
2010-05-27 03:36
vALSAMAKI dORA
Pro Cameras:
how I can change system from NTSC to PAl in my JVC GY-HD100 I live in greece. Thanks in advance Dora
Answer
2010-05-27 10:35
Tommy Fields
GY-HM150/100:
Recently on a long shoot, I plugged up my camera so I wouldn't have to worry about changing batteries. Since that shoot, my camera will only power up if I plug it in. I cannot get it to power up even with a fully-charged battery.Am I doing something wrong? I own three GY-HM100s and they are great cameras! This is the first glitch like this I have experienced. Thanks!
Answer
2010-05-27 15:04
Brad Penner
GY-HM150/100:
Is there any way to capture video recorded with the GY HM100U into FCP 5?
Answer
2010-05-29 13:11
abdul
2D-3D Converter / Processor:
When I use IF-2D3D1 to convert a single HD-SDI signal from GY-HM700 to 3D, I did not feel it’s the same as when I use 3D camera, is there anything to do with settings so I can improve the converted material quality?
Answer
2010-05-29 15:15
Todd trigsted
GY-HM700/710/750/790:
I bought a new GY HM700 and have a humm in channel 1 even when there is no xlr mics plugged in. When I turn the camera on, i can hear the hum begin and get higher in pitch to a stable hum. The hum is magnified when I plug a mic into channel 1 Also , the fan seems too loud.
Answer
2010-06-01 07:31
james
GY-HM150/100:
Oy, I just deleted half of an interview on Card B in my GY-HM100U. I deleted it while the SD card was in the camera. Is there a way to undelete this file? I see software packages for PCs/Macs, but thought there might be a pat solution by now. Thanks.
Answer
2010-06-01 11:04
Lee Weisert
GY-HD200/250U:
I have four little dashes in the bottom left of the screen. I may be dumb as a stone...how do I get rid of them?
Answer
2010-06-01 13:44
Deborah
Pro Cameras:
JVC's GY-HM100 ProHD Camcorder, any way footage could work in I movie HD? Thanks, Deb
Answer
2010-06-02 05:10
Dejan
Combo Decks:
I have problem using Maxell 4.7 GB DVD-R 16x when I dubbing from the SR DVM 700 HDD to DVD drive. The dubbing could not be complited because of the disk error. My question is:Did the SR DVM 700 HDD have some factory recomended DVD-R manufacturers or what could be the main reason for this problem?
Answer
2010-06-02 15:48
Michael Cox
GY-HM150/100:
This camera's single focus/zoom ring means I can only do one function manually at a time. Is it mechanically connected to the lens elements or is it a servo, and if the latter, can I get repeatable results when in a fast-moving situation and focusing manually?
Answer
2010-06-03 11:06
Dismas Barbito
GY-HM150/100:
Hi our JVC GY-HM100u cameras cannot read 32GB Sandisc 10 class. It is card recommended by You. New Firmware ? Please answer.
Answer
2010-06-05 15:02
Bob Garon
GY-HM150/100:
I have been attempting to erase the two HD cards from my camera and can't figure out what to do to enable me to erase the information. Where is the answer in the instructions? Can you help? Is there a book on the GY-HM100 JVC?
Answer
2010-06-07 07:44
Eric Corrick
GY-HM150/100:
Just purchased the GY-HM100u. The video would not edit in Adobe Premeire Elements 4, so I was told I needed "ADOBE PREMIERE ELEMENTS 8". I bought ELEMENTS 8 and I have audio but the video is just a red screen in the editor. Does anyone know the correct camera settings to match the "presets" in Adobe Premeire Elements 8"? Please, please help.
Answer
2010-06-07 08:56
Eric Corrick
Pro Cameras:
Just purchased the GY-HM100u. The video would not edit in Adobe Premeire Elements 4, so I was told I needed "ADOBE PREMIERE ELEMENTS 8". I bought ELEMENTS 8 and I have audio but the video is just a red screen in the editor. Does anyone know the correct camera settings to match the "presets" in Adobe Premeire Elements 8"? Please, please help.
Answer
2010-06-07 14:02
michael gorzka
Combo Decks:
Hello, We have a JVC SR-DVM600U. It was purchased for TV3 in Brunswick, ME. We can't find a recording that we know is on the hard drive but the station manager is on leave. Can this model be partitioned? And if so, how do we access those partitions? Thanks for your help! Regards, Michael Gorzka
Answer
2010-06-08 16:04
szlevi
GY-HM150/100:
What's the actual (raster) size and resolution of one CCD?
Answer
2010-06-09 12:06
Alan
3D Monitor:
Is there a place in NYC that I could rent the GD463D10U?
Answer
2010-06-09 12:53
Hoag Levins
GY-HM150/100:
I've just purchased a JVC HM100U. I have three Mac laptops. One of them has OS 10.5.8, another has OS 10.6.3 and the third has OS 10.4.11. The .mov files downloaded from the camera pop open and play fine on the 10.6.3 machine. But on both of the others laptops, the very same files pop open and have sound but only black screens where video images should be. Why is this happening? How to I fix it?
Answer
2010-06-09 16:15
Nick Stillwell
GY-HM700/710/750/790:
Can I use a GY HM700U on an extended shoot in Europe?
Answer
2010-06-09 18:27
David Cooper
Combo Decks:
JVC SR-MV45 I am recording directly from a DV camear via the analog inputs to DVD input F1. This is the 4th time that the deck has stopped in the middle of recording. The picture starts to flutter a little then it goes blank then the LED flashes "Loading". Sometimes it has just shut off. Does recording in FR - FreeRate as opposed to SP mode have anything to do with it. I just received my new Firewire IEEE 1394 and will be using the DV In port from now on.
Answer
2010-06-09 23:30
Spencer
Pro Cameras:
I'm looking into both the GY-HM100U and the GY-HM700U, but how long I can record on a single 16GB card at full HD 35MBPS?
Answer
2010-06-10 08:20
Bart Buerman
GY-HM700/710/750/790:
We are working with 2 GY-HM700 camera's and several FCP 7 edit sets. When you shoot in .MP4, you can use Log and Transfer to import to FCP. Then you can rename clips easily and you also get the eclosing folder as reelname. We work with the .MOV format, so we can drag and drop the clips into FCP. However, then you don't get the enclosing folder as reelname. As we shoot more and more footage, and we re-use the SD cards, all our footage is stored on a server. Every SD card is emptied into a unique folder after shooting. For future re-building possibilities, it would be really convienient if we could drag and drop the files, but stil get the reelname with it! Even when you shoot in .MOV format, the camera also stores all kinds of datafiles on the SD card. Is there a way of using Log and Transfer to import files when shooting in .MOV? It doesnt have to take long to import, because there is no need to re-encode. But it would be useful to maintain the extra data! Could you please shine a light on this issue? We probably are not the only ones! Thanks in advance, Bart
Answer
2010-06-10 15:19
wojtek
GY-HM700/710/750/790:
hi i need to know what is the ISO equivalent for 1920 x 1080/24p shooting with gy-hm700u thanx
Answer
2010-06-12 22:46
Philip Goetz
GY-HM150/100:
I formatted a 32GB Panasonic class 10 SDHC card (RP-SDW32G) card in a GY-HM100 with firmware version (CAM1.09, ARM1.05, EEPROM052), which according to the JVC website when following directions for checking firmware said "Current Version: v107, Release Date: 2009-08-11 No upgrades are available. You have the latest version of the software." This card has been used successfully in other cameras so I thought if putting it in a camera with the apparent latest firmware and formatting it, I would be good. Well, I shot at 35mb/sec 1920 x 1080 at 30P for one hour and then for 10 minutes and then another 10 minutes and when I got home and put the SDHC card in my reader and attached to the computer I got a (Error code -36) message that data could not be "read" or "written". I put the card in the camera and it says "video management file is damaged, recovery is required". I try to recover and it says "Memory card error". I put it in an HM700 and it tries to restore and then says "invalid media". The user manual says "Replace the SDHC card with a new one." I have connected both the HM100 and HM700 containing the card to a computer via USB with no luck. The HM700 firmware is apparently current too: "Current Version: V0301, Release Date: 2009-09-18 No upgrades are available. You have the latest version of the software". Is there any way to recover this data? It looks like the card has 12 GB available, which sounds about right when looking at the amount of time I was recording.
Answer
2010-06-16 03:04
Rapazky
GY-HM700/710/750/790:
When we are trying to convert an *.mp4 file to a dvavi file with Premiere CS4, Sony XDCAM EX Clip brouser or Winff? we have a similar problem - a sound distortion (high-level noise instead of parts of a sound).
Answer
2010-06-16 05:55
Jean Blouin
GY-HM150/100:
May i use my GY-HM100 to broadcast on Ustream?
Answer
2010-06-16 16:36
Fatai
Pro Cameras:
can i get windows7 drivers for jvc sr-dvm700
Answer
2010-06-16 21:24
Patrick
Combo Decks:
I have scanned though the manual of the SR-DVM700U I could not find any info regarding direct video recording to the HDD ie video switcher or CCU output to the video input of the SR-DVM700U to record DV footage for back up or direct access to the HDD. I did notice the 250 GB HDD will hold 18 hours of DV video, but I could not see a method to capture live video to the HDD directly. Is it possible to record a video signal directly to the HDD for event capturing in DV? Thanks, Patrick
Answer
2010-06-17 01:34
willIE WALKER
GY-HM150/100:
I accidently recorded in MP4, how can I get it back to a quicktime file
Answer
2010-06-18 19:54
Erwin
D-ILA Projectors:
I just bought a DLA-RS2. Unfortunately while I was watching a movie a power outage occurred. I have a line conditioner on connected to the projector, but no UPS. When the power came back on, the unit did not go into stand by mode and no other lights are on. What should I do next?
Answer
2010-06-21 09:05
Steven George
Pro Cameras:
Is there a tripod available for the GY-HM100U? How much does it cost?
Answer
2010-06-22 04:44
Steven George
Pro Cameras:
Regarding the GY-HM100 professional camcorder, is there a tripod available for this model?
Answer
2010-06-22 10:45
Dan Saso
D-ILA Projectors:
I am looking for a replacement lamp for an DLA-RS2. Any suggestions where it can be purchased? I would appreciate any Canadian vendors as well! Thanks, DS
Answer
2010-06-27 09:07
Yashira J
Combo Decks:
Hi! I just bought a JVC SR-DVM600 and I connected it to a NLE software like Final Cut pro. FC recognizes the deck without any trouble, but seems like the Deck only works with some specifics tapes. When I insert a Tape that has pal material (recorded with a Sony DVCAM) the deck shows a dirty image completely pixelizated. But, for example, when the tape has material from a panasonic camera it shows no problem at all. please help me out here, I bought this to work with a large amount of tapes recorded witth this Sony camera and its seems that none of it works. (tapes are new).
Answer
2010-06-29 05:47
BRUCE FINKELSTEIN
GY-HM700/710/750/790:
Will I be able to record and edit video from GY-HM700U in Final Cut Express 4?
Answer
2010-06-29 05:57
Scott
Pro Cameras:
We have a SR-MV45U and I am having trouble dubbing (VCR to DVD) multiple programs using manual dubbing. The first program records fine but I am unable to record the next one. I have gone through the manual and there is no information on dubbing multiple programs, can you provide any assistance? Thank you.
Answer
2010-06-29 12:37
Muffin Steelman
GY-HD200/250U:
Was told by JVC support the new lesser Sony SBS32G1 SxS card will work in HD250 camera. Camera says it won't format or read the card.. HELP
Answer
2010-06-30 10:52
felipe Carosella
GY-HM150/100:
My camera GY-HM100 has dust between the lens. Where I can take my camera to fix the problem? I`m from Argentina. Thanks
Answer
2010-07-03 08:53
Yvonne Parry
GY-HM150/100:
Hi, Your answer last year to question ID #1121 advises that Apple does not provide with iMovie the MPEG2 video decompressor component used for .mp4 (XDCAM EX) and .mov files created by GY-HM100/700 codec. Is this still the case please, or is iMovie 09 (current version iMovie 8.06) compatible with the files created by the GY-HM100? (We'd like to buy this model for use with the Macs running iMovie in our school).
Answer
2010-07-04 16:26
Michael Shelestak
Pro Cameras:
Is there anyway to switch between a 4:3 and 16:9 ratio? I have a golf simulator and would like to use that set up for a home entertainment room as well. I would like to buy a DLA-RS25U, and use it for both the simulator and the home entertainment system.
Answer
2010-07-06 07:21
Fred Brunell
GY-HM150/100:
The Iris is un-responsive on at least one of our cameras. The only place that you notice a difference is between F2.8, F3.2, and F3.5. The picture goes from okay to way too dark, to closed. None of the F-stops above 2.8 open the iris any more. Another problem we occasionally have is when we use the cameras in auto mode, it appears the iris is opening and closing about once a second. Nice effect, if you want it, but it doesn't fit in with our projects. Thanks for any advice you can provide.
Answer
2010-07-06 17:13
Aaron Buchanan
Blu-ray Recorders:
Does the SR-HD1500 have a "Chase Play" function when recording to the HDD?
Answer
2010-07-08 14:57
Laurie
Combo Decks:
I have an SR-MV45U combo deck. I have been dubbing vhs tapes for quite some time but recently all of a suddend the dvd's that I create from the dubbing cannot be copied on my computer. I get a disk read error on all of them. I have tried about 8 disks and I know it's not the disks as I can burn files to the disk and copy them. It's not the burner in my computer as I mentioned I can burn files to the disks and then copy them. I simply can't copy the DVD's created from dubbing on my jvc unit. Now I have copied many of the disks in the past. The only thing I can think of that I have done recently was unplug the unit for a day while I painted in that room. Could that have caused some issue with the factory default settings or is there a setting that I'm somehow missing. Any help and guidance would be appreciated as I'm lost on this one.
Answer
2010-07-09 02:32
Harcharan Singh
D-ILA Projectors:
Hi, We own a DLA RS20 projector connected to a Quadro 5800 card thru HDMI? Can we do an horizontal span with one monitor and another onto the projector? Thks Harcharan
Answer
2010-07-13 10:03
Yvonne Parry
GY-HM150/100:
Hi, Your answer last year to question ID #1121 advises that Apple does not provide with iMovie the MPEG2 video decompressor component used for .mp4 (XDCAM EX) and .mov (Final Cut Pro) files created by GY-HM100/700 codec. Is this still the case please, or is iMovie 09 (current version iMovie 8.06) compatible with the files created by the GY-HM100? (We'd like to buy this model for use with the Macs running iMovie in our school).
Answer
2010-07-14 05:54
Gary Mansfeldt
IP Security Products:
After installing the software for the VR-N900U, it is asking for a user name and password. What are these?
Answer
2010-07-18 14:49
Blake
Pro Cameras:
Can you film in slowmotion using the GY-HM100U and if not what cameras do?
Answer
2010-07-18 15:10
marc
GY-HM150/100:
How do you turn off the annoying soung when you work with the camera menu...... Thanks I can't wait for an answer...
Answer
2010-07-21 12:43
Robert Steinhagen
Combo Decks:
I am trying to connect my Mac with Final Cut Pro to the SR-DVM700U for capture from the DV. Final Cut Does not even see the deck. Do I need a special driver or is there a procedure for getting connected?
Answer
2010-07-23 14:17
Todd Mayo
Pro Cameras:
Is there updated firmware for the SR-DVM700S?
Answer
2010-07-26 19:30
Juan
Pro Cameras:
Tengo la Camara JVC 100 U uso las terjetas SD HC clase 6 todo ok pERO AL USAR LAS TARJETAS Panasonic SD HC Clase 10 la Camara no funciona sale espacio insuficiente 00:00 Juan Ceballos DJL9FM
Answer
2010-07-27 01:26
Dillon
GY-HM700/710/750/790:
I have two JVC GY-HM700. I would like to know if anyone has used these camera's in a studio with the RM-LP25U remote unit and what cables it uses? I've tried contacting JVC but they havent replied.
Answer
2010-07-27 04:20
Anton
IP Security Products:
Hello! I am configuring a previously configured by an unknown user VN-C655U IP camera. I cannot connect to it - the default 192.168.0.2/24 IP does not respond. How can I reset the camera to the factory settings. Best regards, Anton
Answer
2010-07-27 06:08
toni
Combo Decks:
hello I wonder if the deck DVM700US have the DVD or CD to recover the general setup of the instrument as I need and I can not find much to fix my deck. I'm waiting for a response. Thank you.
Answer
2010-07-27 10:04
toni
Pro Cameras:
hello I wonder if it has the cd / dvd recovery of JVC SR-DVM700US because I need a lot to get my deck. respsta wait. THANKS.
Answer
2010-07-28 11:25
Ron Friedman
GY-HM150/100:
I will be using my GY-HM100 to record live events for live, HD quality web streaming on my Livestream.com channel. I will be using a new 17" macbook pro to access my channel. Can you suggest any high quality, portable, mac compatible devices that can interface with the GY-HM100? Should I use the component output or HDMI output for best results?
Answer
2010-07-28 13:38
Pierre
GY-HM150/100:
Is there documentation or tutorial to fully explain System Select and Rec Mode (what each one does exactly) and the pros and cons of each setting with each --- beyond the PAL/NTSC issue? Also is there a telephoto lens for the HM100? Also is there a way to get a quick turnaround time on a repair (i love the camera) but for some reason the AC power connector on the camera seems to be cracked .. how i dont know but know the camera will not run off A/C connection... pierre
Answer
2010-07-28 13:40
Pierre
GY-HM150/100:
Also, will there/can there be a firmware update to allow HM100 to use the new SDXC cards?
Answer
2010-07-29 08:15
Mohammed.Imran
Blu-ray Recorders:
Hello Sir, i am from saudi arabia , can you please tell me is there any product for recording (should be all in one , like DVD , CD , HDD , Mini DV Cassete and Video Cassete ) please reply me as urgent as possible , at present we are having seperate devices but it is holding to much space so we want to replace it with all in device with rack mounting kit. Regards Mohammed.Imran
Answer
2010-07-29 14:57
Jay
Blu-ray Recorders:
when connected to Macbook Pro via firewire can it record and pass through video when played by Final Cut pro
Answer
2010-07-29 17:18
MARCO HERNANDEZ
GY-HD200/250U:
Can I record in tarjet SD Class 10 with this kind of camera
Answer
2010-07-31 09:26
Jim Byrnes
GY-HM150/100:
Hi, I recently bought a Fisheye lens with macro for my GY-HM100U camera. I screwed the macro and lens together and then screwed it onto the camera. When i tried to unscrew it, however, only the top lens part came off; the macro will not screw off. Any suggestions for how to remove it and why it is stuck? The lens is Bower .42x 46 mm thread superfisheye with macro (VLB4246B).
Answer
2010-07-31 09:31
John Green
FAQ pages:
We are looking for a mini DVC plaer/recorder that will also handle mini HD DVC tapes. Thanks
Answer
2010-07-31 15:05
Carl Strachan
GY-HD200/250U:
i am trying to playback my tape on the lcd screen... it only showing a blue screen when i play it in vtr mode. I checked the PB tape item in the video format menu and it is set to auto. I am guessing i need to match the format of the tape and the format the cam plays back... any thoughts?
Answer
2010-08-01 12:00
Michael Berardi
GY-HM700/710/750/790:
I just purchased a brand new - out of the box - GY HM700 camera. I shot my first footage several days ago and noticed a small red dot on ALL the footage. It appears that it is a dead pixel???? I cleaned all the lenses and the red dot is still there. This is the FIRST time I ever used this camera? I have read that there might be a fix inside the camera for this problem. Can you PLEASE help ASAP? I just spent $8,000 for this camera and I can't use it!!!! If I need to send this camera back to JVC after using it just ONCE then I would rather take the camera back to the dealer and purchase another brand. This is EXTREMELY frustrating. Where is JVC's quality control?? How could this camera leave the factory with a dead pixel??? Your immediate attention would be greatly appreciated. Thank you Michael Berardi Berardi Productions Inc.
Answer
2010-08-02 09:47
Max Murray
Pro Cameras:
My hd110 camera is showing "record inhibit" on screen and viewfinder when trying to record. I was recording on a tape and it hit the end of tape while recording. Immediately following that I put in new tape and now "record inhibit" message comes up no matter how many times and various tapes I have tried? Help! mx
Answer
2010-08-02 14:18
Stephanie
Combo Decks:
I have an SVR-DVM700U and I am trying to dub mini dv tapes onto a windows7 machine to upload the tape contents to our network drive. Everything worked fine with the 1st 3 tapes I tried, and now when I do the exact same steps I either see a (sometimes partial)scrambled test pattern or a black screen for the playback. I am connecting with a firewire.
Answer
2010-08-03 10:57
Matt Sullivan
FAQ pages:
How do I record from dv to hdd on jvc sr-dvm600us? I have two dv tapes I would like to transfer to HDD so that I can edit, then burn to DVD?
Answer
2010-08-03 13:21
Eric Hammond
Combo Decks:
Why is our SR-DVM700U now taking hours to burn a 45 minutes show from HDD to DVD? Any help would be greatly appreciated.
Answer
2010-08-03 15:05
Jim Francis
Pro Cameras:
Just received a JVC SR-DVM700. Do I need a monitor to operate or can I use my Mac Pro monitor? If viewing from computer will not work, can you recommend an inexpensive monitor?
Answer
2010-08-05 03:43
Claire
Pro Cameras:
Hello, When I use the SDHC key with memory card to transfer the videos, I have no problems. But I can't make any transfer directly from the camera. The card doesn't appear on my desk. What should I do?
Answer
2010-08-07 15:20
Brian
D-ILA Projectors:
I have a JVC DLA-RS1X projector. Lamp warning light came on and I replaced the lamp. Now I can get the warning indicator light to go off even after following the instruction. Manual says to press the following in order: EXIT, ENTER, Hide Down Arrow (hold for 2+ seconds). The green light is supposed to blink for 3 seconds, but it continues to blink without stopping and the red lamp light does not go off. What am I doing wrong? How do I reset this timer and get the lamp indicator to turn off?
Answer
2010-08-07 16:43
Luis Perez
Pro Cameras:
I just got my new JVC GY-HM100U with new SDHC class 10 32G Extreme. I receive the message "Insuficient Space" and cannot use in video mode.. but I can take pictures. What is wrong?
Answer
2010-08-07 17:02
Luis Perez
GY-HM150/100:
I just got my new JVC GY-HM100U with new SDHC class 10 32G Extreme. I am getting the message of "Insuficient Space" and cannot use in video mode.. but I can take pictures. What is wrong?
Answer
2010-08-09 12:53
Steve Sandberg
Blu-ray Recorders:
When recording a Blu-Ray disc from the AVCHD format, is the highest-quality recording speed supported? I have in mind the odd limitation of Canon's AVCHD disc burner, which won't accept footage shot at the fastest speed the cameras can record at. Thanks for your attention.
Answer
2010-08-09 13:02
Steve Sandberg
Blu-ray Recorders:
When recording a disc from the AVCHD format, does the recorder support material shot at the highest quality setting? I have in mind the strange limitation of Canon's AVCHD disc recorder, which doesn't accept footage shot at the highest quality speed the cameras can shoot at.
Answer
2010-08-09 13:06
Steve Sandberg
Blu-ray Recorders:
When recording discs from AVCHD material, does the disc support the highest-quality camera recording speed? I have in mind the strange limitation of Canon's AVCHD disc burner, which won't accept footage shot at the fastest recording speed the cameras can achieve. Thanks for your attention.
Answer
2010-08-13 00:13
Paul Coker
GY-HM150/100:
Can I use iMovie or Final Cut Express (for a MacBook Pro) to edit footage shot with this camera or is it best to use Final Cut Studio? Can Adobe Premier Express or Adobe Premier be used as an alternative?
Answer
2010-08-13 10:59
Pat
GY-HM700/710/750/790:
Hi, New SDXC, Memory Cards, in capacities up to 64GB are begining to appear on the market. Will the GY-HM700 be able to use the SDXC Cards, and will they be able to use the full 64GB capacity? Thanks, Pat
Answer
2010-08-13 15:33
Carl strachan
Pro Cameras:
I cannot get my gy hd250 to display image on my view finders to record. when I push the top rec button on the handle it says it is locked on the viewfinder. When I do record it only plays back as a green screen. Any ideas?
Answer
2010-08-15 10:21
Janet
GY-HM150/100:
I have the Question Mark icon on a few video files and cannot open those files. What causes that and how to avoid in future?
Answer
2010-08-15 21:02
Geoff Smith
GY-HM700/710/750/790:
Hi Can someone please enlighten me as to the differences between the 700E and the 700U. When I read the specs for both they seem the same camera? Thanks
Answer
2010-08-16 10:05
Phil Lucero
Pro Cameras:
How do I load footage from the GY-HD250 without dropping frames? When I attempt this via the firewire (IEEE1394) connection, the software takes at least 5-6 seconds waiting for video (that is visible) before capturing anything. I am runnning Final Cut 6.04 using the HDV 1080i30 capture setting for footage that was shot 1080i30 on HDV tape using the JVC GY-HD250.
Answer
2010-08-16 15:42
joe harmon
GY-HM700/710/750/790:
I have a pixel out right in the middle of the screen. Just above the center crosshairs. Is this a "send it in" issue or is there a reset of some sort that will correct this problem? Also, my pop out viewfinder has lost it's pop.
Answer
2010-08-17 13:53
Matt Winne
Pro Cameras:
Is the HM700 capable of interval recording? If not, is there a firmware update that will allow it? Thanks!
Answer
2010-08-18 10:48
JLF
Pro Cameras:
can the xprotec software conected to a JVC digital recorder, record images directly on the PC?
Answer
2010-08-19 00:56
rajan tahim
Pro Cameras:
i have jvc GY-Hd111 and i just bought KA-MR100 I have managed to mount the recorder between my battery adapter the camera recognise it only problem is i bought sony sxs-1 momory stick it just keeps on giving formate error is the sxs-1 does not compat with the mr-100 i havent checked it with the regular sxs disk yet can you please let me know where does the problem lies thank you Rajan
Answer
2010-08-25 08:20
Keith Tromiczak
Blu-ray Recorders:
Can the SR-HD1500US Blu-ray Recorder accept footage shot on a GY-HM700U camcorder in the .MP4 file format? All of the materials I've seen specifically mention that it can accept the .Mov files from the GY-HM700U, but fail to mention footage shot in .MP4.
Answer
2010-08-27 22:33
David Simpson
Blu-ray Recorders:
Can the analog audio inputs be set as the audio source when recording DV or HDV video to the SR-HD1500 via firewire/iLink or does the audio have to be imbedded in the firewire stream?
Answer
2010-08-27 22:34
David Simpson
ProHD VTR:
Can I record live video to the HDD in the SR-HD 1500? I realize it can't be done directly to optical disc.
Answer
2010-08-31 08:54
Randy
Pro Cameras:
what is the easy setup in final cut pro using the hm100
Answer
2010-09-01 12:01
Pat
GY-HM700/710/750/790:
Hi, I'm going to be using the GY-HM700 to shoot some sunrises and sunsets for an ongoing project. Will pointing the camera directly at the sun in this manner damage the camera? Also, is there a way to protect the sensor from a bright light like the sun, arc welding, or perhaps a laser? Thanks, Pat
Answer
2010-09-03 09:56
Greg Lockhart
Pro Cameras:
What is the best way to copy video straight from the 700u onto a DVD. ( a dub if you will) no editing at all
Answer
2010-09-04 13:52
David Eager
GY-HM150/100:
I Shoot wedding videos, How close to the subject do I need to be to get reasonable audio pick up with the shotgun mic supplied with the Gy HM100 camcorder
Answer
2010-09-06 10:46
Kelly Abt
Pro Cameras:
How do you connect to a mac to transfer images via mov files. Is it firewire and does fcp recognize it's connected??
Answer
2010-09-08 06:53
Jack Bentele
GY-HD110U:
I'm an intern in a film class in Houston, Texas and the instructors have just bought a few GY-HD11OUs to begin using. They purchased SansDisk Class 10 16 GB SD cards (recommended by B&H suppliers) but are not able to record anything. When inserted, a message reading "Insufficient space" pops up and the card displays (in the top right corner) blink red. Are they the wrong kind of SD card? I've tried reformatting numerous cards but nothing is working. Thank you for your time.
Answer
2010-09-08 22:22
udeydeep
GY-HM700/710/750/790:
hello sir /madam regards of the day, m india based short film director, now i use digi beta format for my films. m planning to go with hd format to print my film on chemical film (koda or fujifilm). is it possible to print on film without loosing picture quality? thanking you, udeydeep
Answer
2010-09-13 17:25
Nick Kumar
D-ILA Projectors:
Hello, I am getting an out of range error on DLA-RS1X when we try to play a blu ray movie? Any suggestions? Thanks,
Answer
2010-09-13 21:38
Max Donati
Pro Cameras:
Hi. I have a SR-HD1500 and a Sony camera NX5. I can download the HD files to the 500GB hard drive but not the SD files. I am also unable to burn to DVD the HD files. Contrary to the description on your website: "HD recordings from a camcorder can be easily transferred to a high definition disc, or down-converted and recorded onto a standard DVD. USB 2.0 and i.Link connectors, combined with an SD/SDHC memory card slot provide an interface to most SD and HD digital camcorders. The SR-HD1500US supports a wide range of AVCHD, HDV, and DV camcorders, including JVC's Everio models. Built-in format converter When standard definition copies are needed of original high definition material, the source footage is downconverted and then recorded to inexpensive DVD discs. Even complete Blu-ray™ HD projects can be recorded in SD for clients who may not yet have HD playback equipment." Do I need a firmware upgrade? It Is very disappointing to not be able to do what you say I should be able to do.
Answer
2010-09-14 08:45
Gildas STEPHAN
GY-HM150/100:
Hi, Do Final cut express 4 work with .MOV of GY-HM100?
Answer
2010-09-14 09:13
Varuna De Silva
3D Monitor:
Hello, We are using the JVC GD-463D10U stereoscopic display. Is there any information regarding the projected physical depths/distances of this display, corresponding to various disparity levels? I.e. How far from the display screen would a viewer perceive an object which has a unit of disparity?
Answer
2010-09-14 23:42
Michael Ramey
Blu-ray Recorders:
Will the SR-HD1250 record from a 3-D source such as the Fuji W-3 camera?
Answer
2010-09-15 05:10
Dwight Allison
D-ILA Projectors:
I want to use my comcast universal remote to turn on and off my DLA-RS10 projector. Do oyu know the 5 digit code I should use with the universal remote?
Answer
2010-09-16 14:28
Rick Everson
Blu-ray Recorders:
I just ordered the JVC SR-HD1250US Blu-ray/HDD Recorder and will receive it an about a week. I am now having doubts?? Will this unit be compatable with my Hitachi Blu-ray hard drive camera # DZ-BD7HAF ??? On my Standard Def recorder, the aspect ratio for High Def wide screen is not there and thus standard def DVD when copied are vertically distorted.
Answer
2010-09-19 13:59
Robert Spehalski
GY-HM150/100:
Vivitar sells a battery replacements for the BN-VF823 supplied with the GY-HM100U. They are 7.4V. Will 7.4V present any problem?
Answer
2010-09-20 03:24
Justin
Pro Cameras:
Please let me know the camera setting for shooting lapse footage in the JVC GY-HM100E thanks Justin
Answer
2010-09-21 20:10
kevin Hollman
Pro Cameras:
Just got my hm100u, put my sd class 6 16gb card in, said had to be formatted so i did it. Then when I went to record it said there was insufficient space. Why is this, i cant figure it out.
Answer
2010-09-24 08:34
Gary Treadwell
Blu-ray Recorders:
On either the SR HD -1250 or the 1500 can you import an edited project (using Apple Final Cut Express)? I am sending that project from the computer back into the camera to record in HDV 1080, then download the same project from the camera tape via the 1394 input into the 1250 or the 1500. The edited project could be burnt to Blu-Ray disc that will play "seamless-ly" on most current (last 2 years major manufacture) Blu- Ray players?
Answer
2010-09-29 09:05
Holly
Blu-ray Recorders:
When burning more than one program onto a DVD-R from the hard drive of the JVC SR-HD 1500, each program becomes it's own separate title. I was wondering if I could burn 3 programs together so that when putting the finished DVD into the DVD player it would only be one title & play seamlessly. Is this possible?
Answer
2010-09-29 18:16
LaDon Findley
Pro Cameras:
I have a GY-HM700U camera that I cannot get the composite video output to work. I have went into the AV Out menu and made sure all of the settings are correct. The HD-SDI output works fine but no composite output. I switched to component and am getting output on the bottom 2 component connections, but no output on the top component or composite connector?
Answer
2010-10-04 06:23
Santosh Kumar
GY-HM700/710/750/790:
my ques is jvc 700 ccd is 1280 or 1920 and other is can i shoot interval recording please tell me why jvc not make 1/2 and 2/3 inch ccd's. i do not know about jvc 700 low light perfrmance.i soot indians weddings & i want to buy a good low light camcorder. please suggest me jvc 700 is better than sony pmw ex3, pmw ex1r & canon fx 300 and panasonic 370 p2.in present i used canon xl2 camcorder. now i want to go for full hd camcorders
Answer
2010-10-05 12:52
Karyn O\'Dell
Combo Decks:
We have a JVC SR-DVM700 and would like to figure out some method to get our recorded files from the recorder onto a computer. In the past we've burned the files to DVD, but then to modify them we have to convert back from DVD into some other usable format. We have a firewire cable and I'd like to be able to use that to import or edit the recordings. When I connect it to our laptop, "JVC DV Tape Recorder/Player #2" shows under My Computer, but the description says "0 pictures taken." How can I get to our recordings using the laptop (Windows XP) and firewire cable? Thanks, Karyn
Answer
2010-10-07 04:57
Babbe
GY-HM150/100:
How does the manual focus work? Does it sharpen on one middle point, or does it use more, like 4 points? And does it have face-recognition? And does the manual focus ring has a clear left and right 'stop', or can you turn it round indefinetly? HOpe my questions are clear enough, if not, do ask me to specify them. Thanks a lot!
Answer
2010-10-07 05:26
Babbe
GY-HM150/100:
Hi, I Have one more question; what does the GLV0746USP WIDE ANGLE CONVERSION LENS actually do? How wide does the lens get when you put it on the HM100. And does it also make the zoom less? And what does the HM-100WMR Wireless Mic Receiver Holder look like? Where can you attach it to the camera? Thanks!
Answer
2010-10-07 09:13
Shelley Evans
Pro Cameras:
I am running a MAC video lab at our high school and we are wanting to make the switch from Mini DV to AVCCAM/ hard drive cameras. We only have one machine that has FCP 6 as the software is simply too expensive to run in the whole lab. The other machines have FCE. Does Panasonic make a camera for our needs? The GY-HM100U looked great until we discovered that it is not compatible with FCE (also Apple Canada insisted that FCP was not compatible with MP4??). Anyway- I just really want to buy some new cameras with modern media that will wok with FCE and FCP- something that works with iMOvie too for the younger students would be great too...
Answer
2010-10-09 00:26
vijay
GY-HM700/710/750/790:
hi, there are pixels or grains in my vedio in wide shots.how can i set it ?
Answer
2010-10-09 13:56
Nick Purcell
Blu-ray Recorders:
I noticed in the technical description, that the JVC SR-HD 1250US Blu-ray recorder, will only support recording AVC/H.264 format, up to 12.9 Mbps. I have a lot of recordings recorded at 17 Mbps. Does this mean that I cannot copy recordings made at 17 Mbps?
Answer
2010-10-11 04:52
Santosh Kumar
GY-HM700/710/750/790:
my ques is jvc 700 ccd is 1280 or 1920 and other is can i shoot interval recording please tell me why jvc not make 1/2 and 2/3 inch ccd's. i do not know about jvc 700 low light perfrmance.i soot indians weddings & i want to buy a good low light camcorder. please suggest me jvc 700 is better than sony pmw ex3, pmw ex1r & canon fx 300 and panasonic 370 p2.in present i used canon xl2 camcorder. now i want to go for full hd camcorders
Answer
2010-10-13 16:07
megabytemedia
ProHD VTR:
Is it possible for the BR-HD50U to record Pal DV from FCP using a firewire connection? If so, what would the settings be? Thanks Barry
Answer
2010-10-13 17:08
Daniel Immerman
GY-HM700/710/750/790:
Dose the HM700 QT files work with Final Cut Express?
Answer
2010-10-14 06:05
Gary Hawke
GY-HM150/100:
How can I use a lens control for remote operation (on a jib)? There does not seem to be a connection and the handheld remote control will only work if aimed at the front of the camera.
Answer
2010-10-14 19:54
Patrick Johnson
Blu-ray Recorders:
JVC SRHD 1500 I cannot control the unit with the remote control. "Remote 3" is displayed on the unit when I attempt to use the remote control. I have read the manual and understand that the unit and the remote control are on different remote codes. Because I cannot change the code on the unit, I have tried changing the code on the remote by holding down OPTION + '3' then OK. However this does not fix the problem. Regards, Patrick
Answer
2010-10-15 11:07
Arthur Davis
GY-HM700/710/750/790:
There are 4 dashes in the lower left corner of the viewfinder and LCD display. How do I make them go away?
Answer
2010-10-15 14:14
steve
3D Monitor:
Can I play 3D blurays from a PS3 using this monitor? Are you revising this monitor taking in account all new developments in the 3D format for CES 2011. I really like this monitor, and am a bit leery of lenticular technology for 3D. Are all 3D monitors currently doing a split 540 (1080i) image or are the 3D blurays capable of creating a 1080p image?
Answer
2010-10-17 19:31
Brian McGregor
GY-HD110U:
Is there a fix for a pixel out while recording. A white pixel is always showing up. If not, I will return it to Adorama and buy something else.
Answer
2010-10-18 04:18
jeff blasczyk
Pro Cameras:
I have a gy-hd100 camera and am using premier on an hd laptop with windows 7. I cannot get camera to be recognized for capturing by the computer.
Answer
2010-10-19 14:21
don
D-ILA Projectors:
What is the difference between; D-ILA AND LCOS? JVC vs SONY Projectors Thank you
Answer
2010-10-20 05:46
Scott
GY-HM700/710/750/790:
I'm trying to teach how to use a waveform monitor with the 700 and, using Scopebox or On Location from Adobe, I thought I could feed the Firewire 400 signal to the laptop for waveform display of the picture with down-coverted output. The Scope Box tells me it sees the camera (even the camera TYPE!), but I get no picture. Same is true in On Location. Any thoughts?
Answer
2010-10-24 10:56
adrian ramos
GY-HM150/100:
can you turn off the image stabilization , for when the camera is on a tripod
Answer
2010-10-26 16:27
Steve Abrams
Combo Decks:
Our research lab has 8 JVC SR-DVM700 recorders. The FAQ at http://www.usjvc.com/faq/index.php?action=artikel&cat=7&id=9&artlang=en says: 'At the same time, you can record on "Mini DV and HDD" or "Mini DV and DVD"' but I can find nowhere in the manual (downloaded from http://pro.jvc.com/pro/attributes/DVD/manual/DVM700%20INST.pdf) that tells us how to simultaneously record to MiniDV and HDD. Can you explain?
Answer
2010-10-26 22:02
Bill Mills
D-ILA Projectors:
How do I check for/update to the latest firmware for my RS35U?
Answer
2010-10-26 22:26
Tony
Pro Cameras:
Hi there @ JVC Pro.. I own a GY HM700 and have a problem with EVF. It works in every way, except the EVF screen appears to be faulty in that it has no colour or b&w, just a diffused white screen with minimal outlines of the subject or landscape? It's ort of a cartoonish look. Could you please help me with this? Cheers...Tony
Answer
2010-10-27 01:28
Gary Kildea
GY-HM150/100:
Please explain the MIC LEVEL SETTING item in the Video Shooting Mode menu. What values do these numbers actually represent? Does -1 for example mean -10dB? What is the function of this? To compensate for particularly high or low output microphones? And a supplementary question: Why are User Manuals (JVC's and others) so determinedly opaque with this kind of information? Would it hurt to provide a little more user friendly advice? Bad enough for relatively experienced people like moi but these cameras - even if designated 'pro' - as often as not end up in the hands of beginner who must be totally baffled. There's a huge gap between engineers and marketeers that needs bridging. And there are some things that even Google doesn't know.
Answer
2010-10-28 16:27
Anthony Curtis
Pro Cameras:
I need a list of your cameras we can use to broadcast live via USTREAM.com
Answer
2010-10-30 17:32
unique
Pro Cameras:
Is my GY HM100 camera compatible with Adobe Elements Premier for Mac?
Answer
2010-10-30 20:00
Steve Nethery
D-ILA Projectors:
What type of screen material is recommended for the RS35 in a room with no ambient light/full lighting control?
Answer
2010-11-01 06:26
Peter J. Fusco
Pro Cameras:
I am running Vista 64. It looks for a driver for my SR-DVM600 (connected via firewire), but I can find none anywhere. Where can I find drivers for this product?
Answer
2010-11-01 21:45
paul
Pro Cameras:
how to encrease contrast for jvc 700 u my camera colours are not sharp
Answer
2010-11-02 07:14
Tim
Blu-ray Recorders:
Is it possible to mimic the AVCHD or MOV files created by compatible camcorders using transcode software, so that these files may be imported from SD cards to the HDD for BDMV disc creation? What are the exact MOV and AVCHD specs?
Answer
2010-11-02 12:35
suleiman Ibrahim
FAQ pages:
I have a JVC SR-DVM600 DV/HDD/DVD RECORDER but not functioning properly only the display panel indicating PLEASE WAIT... and no any function key could function when pressed.
Answer
2010-11-02 15:17
Eugene Lehnert
Blu-ray Recorders:
Hello- Does the SR-HD1500US have the ability to dub from NTSC and PAL digi-beta decks to DVD and HDCAMSR/D5 to Blueray through the single SDI port? Thanks, Eugene
Answer
2010-11-04 07:33
John Simmons
Blu-ray Recorders:
Can live video be recorded from cable TV to the hard drive of the SR HD1250 or HD1500?
Answer
2010-11-05 06:27
John Duffy
Blu-ray Recorders:
With the SR-HD1500US is it possible to record VTC sessions from a Polycom HDX 8000, and then transfer them to Blu-Ray discs?
Answer
2010-11-06 20:25
John Simmons
Blu-ray Recorders:
I asked this question a few days ago but got a notice my e-mail was rejected. Can video be recorded to the SR HD1250 or HD 1500 hard drive from a cable TV input?
Answer
2010-11-07 13:59
Tim Dyson
GY-HM150/100:
Can i load the .mov files created by this camera directly into Final Cut Express?
Answer
2010-11-08 02:06
wsreeves
Pro Cameras:
how to update firmware
Answer
2010-11-08 14:09
matt collins
Blu-ray Recorders:
Do you have a recorder that can record HD live over Component video?
Answer
2010-11-09 16:21
Roman Stikel
GY-HM150/100:
Will there be an firmware update for the camera that would help with the jerkines of autoexposure. At present the camera seems to skip from one exposure level to another. Thanks
Answer
2010-11-09 17:01
Tom Layson
GY-HM700/710/750/790:
Can you explain the relationship between the GY-HM700's MPEG2 encoder, XDCAM-EX, and MPEG4? I shoot QT 720p60, set sequence in FCP to the XDCAM-EX 720p60, and output with current settings .... and come out with an MPEG4. Where does my MPEG2 encode become an MPEG4? Are both the QT and MPEG4 settings on the camera MPEG4? If so, how does the MPEG2 compressor in the camera come into play. I am missing some fundamental.
Answer
2010-11-10 06:26
Jason
IP Security Products:
How do you do a factory reset on the JVC VN-C625?
Answer
2010-11-10 08:30
Ben Rowland
Pro Cameras:
When I import clips from the 700u into Final Cut Pro, the audio is a stereo pair. Is there a setting that can be changed on the camera so that audio comes in as a mono pair? (I know I can change this after the fact in FCP, but it's a pain when you're talking about thousands of clips.)
Answer
2010-11-10 14:33
Gene Czarnecki
Pro Cameras:
I just bought an GY-HM100 camcorder in excellent used condition, however the seller said he sent it to JVC for servicing. I think he meant to upgrade it to Class 10 SD-HC Cards, because he told me that is what it uses. I cannot contact him anymore, so can I find out what actually was serviced? Camera seems perfectly fine and in good working order. The Serial Number is 144V3773, originally bought from an Apple Store by someone named Pittman. Thanks, Gene Czarnecki
Answer
2010-11-10 14:42
Gene Czarnecki
Pro Cameras:
(possible repeated?) I just bought a very good JVC GY-HM100U camcored on EBAY. The seller (Pittman) said it still was under a one year JVC camera warranty, till February, 2011. As the new owner, can the warranty be transferred to me? The seller originally bought the camera from an Apple Store. Thank you, Gene Czarnecki
Answer
2010-11-13 10:34
Payton Peterson
Pro Cameras:
Hello, my viewfinder has some dust inside it (HM700). How can I get rid of it?
Answer
2010-11-16 12:00
Sirus Shojai
D-ILA Projectors:
Hello, I have just received my RS-15. Now, there seems to be a lip sinc issue. strangely, the image seems to be somewhat delayed, approx 150ms. A friend of mine who owns the RS-10 never had this problem. Therefore, we assume that it could have something to do with CMD, although I always have it turned off. Have you heard of this problem and is there anything I can do to reduce the effect? Thank you for your reply. Best regards Sirus Berne, Switzerland
Answer
2010-11-17 12:51
Jerry
GY-HM150/100:
update 1.11 download url
Answer
2010-11-17 14:49
Rene Rondeau
GY-HM700/710/750/790:
I have found a tiny white dot on my finished video it looks like it's a burned out sensor or something like it..I don't know what to do?
Answer
2010-11-18 10:15
Jose
GY-HM150/100:
Will the next firmware update bring the pixel comp menu? It´s the best thing jvc could upgrade in my camera. When will be available the next upgrade?
Answer
2010-11-20 14:12
Dennis Lehmann
GY-HD200/250U:
Footage was shot with a GY-HD201 with a KA-MR100 SxS-Recorder attached, 720p50, on a 16GB SxS-Card. Though I installed the Final Cut Transfer PlugIn several times, and also have installed Sonys XDCAM Transfer Tool, not one programm can even read the footage. It's not the XDCAM EX-Codec. Footage shot with a Sony EX3-Camera works fine with every type of workflow. I can watch the footage with the JVC ProHD Clip Manager, but that's it. What codec, PlugIn, or else, am I missing to import the JVC shot footage?
Answer
2010-11-21 06:41
Matthias Spalinger
GY-HM150/100:
To whom it may concern, I work with the JVC GY-HM100E Video Camera and wirh Appel Final Cut 7. When I start the programme, i get asked which format i would like t ochoose. There are ablut 300 different Formats/Codecs and I have nowhere found a description what i Should choose. Could you please help Do I have to choose the Apple Intermediate Codec 1080/50 or one of the others? me with this Subject? Kind regards Matthias Spalinger
Answer
2010-11-23 17:00
Bob Brandon
Combo Decks:
I am using a JVC SR DVM700. I have recorde productions to the hard drive. I would like to delete the video from the hard drive. How do i delete these videos?
Answer
2010-11-23 19:45
felipe carosella
GY-HM150/100:
SD Card will not stay in at B card slot can you help me? I´m fron argentina
Answer
2010-11-24 14:00
tim wege
Pro Cameras:
We have developed a humm on both channels of our new hm700, whether anything is plugged in or not. The technician has replaced the audio board, but it has not helped. Any ideas?
Answer
2010-11-24 14:09
Jim Blankenship
GY-HM150/100:
The zoom rocker is inconsistent. We just purchased two of the GY-HM100U camcorders. With one of the cameras, trying to do a slow zoom using the zoom rocker produces jerky, inconsistent results because it seems like the rocker switch is glitchy. Even though I use a constant pressure on the rocker, the zoom stutters, or starts & stops, and just a fraction more pressure, causes it to zoom too fast. The other camera works much more smoothly. Is there a zoom speed setting somewhere in the menus?
Answer
2010-11-24 14:58
Jorge Arguello
GY-HM150/100:
I bought a JVC GY-HM100U camera and when I try to edit a mp4 file with Sony Vegas Platinum it won't play it in real time, it plays it like in slow motion, I have to renderize it first in order to work on the edition in real time.Is it normal?
Answer
2010-11-28 23:54
thriftypix
GY-HM150/100:
OK, perhaps I've missed the answer to this. But will the GY-HM100U accept SDXC cards? Is a firmware upgrade available or expected to be available soon? I need long record times, so SDXC cards are a must! Thanks.
Answer
2010-11-29 11:33
gurpal Kambo
GY-HM700/710/750/790:
hi im asking about camera color setting when we are shoot with jvc700 camera ure footage come all grayish look how we can fix that what setting we can do in the camera so we can see perfect color
Answer
2010-11-30 10:40
Annie Patrick
GY-HM150/100:
We are having problems with memory cards. We will record our videos and when we go to upload, they are not to be found on the memory card. However, they are on the card when it is in the camera. I can not figure this out. We have also tried different brands of cards. It doesn't happen every time, but most of the time. There is no way to get the videos off of the card after this and we have to re-shoot our videos.
Answer
2010-12-09 12:48
Steve Norton
GY-HM150/100:
I have downloaded the HM100 firmware upgrade. The included PDF has a three step preparation section. The instructions require you to download, unzip and then transfer the folder labeled UPDATE to the SD card that has been formatted on the camera. I have been unable to transfer the update folder to the SD card. I am connecting the camera to my MacPro via the USB cable, I then use the select level to "playback on PC" which mounts the SD card and places the icon on the desktop. When I drag the Update folder onto the icon, I get a circle/slash icon...I tried the same update process via my Dell PC...same issue, expect the message is that I don't have read/write permission for the SC card. I also tried to transfer the update folder onto the SD card via a card reader... Any ideas...? What am I missing? The SD cards are not physically locked.
Answer
2010-12-10 10:34
jeff pinkowksi
D-ILA Projectors:
I just purchased a JVC projector RS35 and the installers can't get the lens to open???
Answer
2010-12-10 11:00
Pat
GY-HM700/710/750/790:
We have several HM700s and have established a "Default" Configuation for our poroduction house. When the HM700s come back they are to be reset with the Default Scene and Picture Files. Both Default Scene and Picture Files carry our Company Initials and the number 01 (i.e. MCT01). This is supposed to identify the settings and make sure that all cameras carry the same configuration. However, when we load the files, the “Default” Names never appear in the cameras. It is as if the camera loaded the file, but ignored the associated file name. It there something that we are doing wrong with this process, or is there a fix. I'd like to be sure that when we send a crew out, they are carrying all the proper settings. Thanks, Pat
Answer
2010-12-10 11:11
Ben Whalen
GY-HM150/100:
The place I work uses a JVC gy-hm100u, and the .mov files work seamlessly with their version of Final Cut Pro. I like to use Sony Vegas, however--their version being Sony Vegas HD Platinum v.10. I've recorded the .mp4 format, which supposedly is compatible with Sony Vegas. (Just like the XDCAM EX). No matter what I've tried, the files WILL NOT OPEN in Vegas. Even the .mov won't work unless we re-render inside FCP. What am I doing wrong?
Answer
2010-12-13 15:49
Matt
Pro Cameras:
I have a jvc gy-hm700chu, and am trying to shoot in a 4x3 format, rather than 16x9. I cannot for the life of me figure out how. Please help!
Answer
2010-12-18 10:02
Simon Larkin
FAQ pages:
Hi, I have a JVC TH-D5 Home Cinema system and I updated the system last week with the firmware 135a (downloaded from your UK site) and I am now getting a "region code error" when using Region 2 dvds... Is there anything I can do to roll-back the firmware or carry out a system restore?? Kind Regards
Answer
2010-12-22 09:30
Josh
Combo Decks:
Can the hard drive from the sr-dvm700 be changed to a bigger one? And how would i go about doing this?
Answer
2010-12-22 14:20
DC
Pro Cameras:
On the GYHM100U, is there Lanc for control of the lens? or a lens controller for rear use on tripod handles?
Answer
2010-12-22 18:15
azard
Combo Decks:
can i get installer for jvc sr dvm700?cause my hard disk fail..i'm getting to change it...but anyway..this equipment keep display "please wait '/.. thank you
Answer
2010-12-23 13:35
Paul
Pro Cameras:
What is the best way for me to cable a JVC GYHD100 camcorder to the JVC SR-HD1250(firewire with ilink,USB or composite)? What would be the max length for the cable?
Answer
2010-12-26 11:11
Tracy
Pro Cameras:
JVC HD Memory Card Camera Recorder Model #GY-HM100U I have Windows. I have downloaded every program recommended--including PowerDirectorDeluxe 8, Quicktime 7 and Quicktime 7 Pro, DivX among many others. We haved tried recording in MOV and MP4. We have tried it on 3 different computers. My husband and I have researched online for days, but can't open the files--all I can get is audio. Is it possible JVC is not compatible with Windows? Do I have to spend $1,000 on Final Cut Pro AND buy a Mac to use this camera? Does anyone know the secret to this mystery? Thanks in advance!!
Answer
2010-12-26 11:56
Tracy Whiteside
Pro Cameras:
JVC HD Memory Card Camera Recorder Model #GY-HM100U I have Windows. I have downloaded every program recommended--including PowerDirectorDeluxe 8, Quicktime 7 and Quicktime 7 Pro, DivX among many others. We haved tried recording in MOV and MP4. We have tried it on 3 different computers. My husband and I have researched online for days, but can't open the files--all I can get is audio. Is it possible JVC is not compatible with Windows? Do I have to spend $1,000 on Final Cut Pro AND buy a Mac to use this camera? Does anyone know the secret to this mystery? Thanks in advance!!
Answer
2010-12-26 14:25
Karl Seilo
GY-HD110U:
I haven't used my camera for a month. I shot some footage, today, and checked out my shots on my MacPro desktop computer. (Delkin 16GB SDHC Class 6). I deleted 4 files from the card while still inserted in the computer and emptied the trash before ejecting the card. When I inserted the card into the camera, the camera won't function. All I see is the "hour glass" icon revolving. Plus, none of the camera controls works. I have to remove the battery to shut down. When I replace the faulty card with a new one the camera functions fine. When I put a good card in with the faulty card, the camera will not function. I realize now that I should not have deleted files from the card while in my computer. How can I reformat and restore this card? Can I completely erase the card on my MacPro and then reformat on the camera? Please help!!
Answer
2010-12-26 18:29
Shana Sureck
GY-HM150/100:
Question 1: I just took the camera out of the box, formatted two SD cards and I keep getting 'insufficient space; when I try to shoot. Advice? I have a job with this camera on Tuesday and had hoped to get a lot of practice before then. Question 2: How do I access 'Program AE selection screen?' Question 3: Are there any one-day or weekend workshops on basic JVC GY HM 100U camera usage?
Answer
2010-12-29 11:27
YUSUF SHAHAB
Pro Cameras:
I can not view the videos on my new mac, but I can view it on my old mac, Apple failed to address this issue, can JVC handle it. I have the new JVC HD camera that shoots in quicktime format. thanks Yusuf
Answer
2011-01-03 08:36
Tim Winn
Pro Cameras:
What is the recommended project setting to use in Premiere CS5? We are shooting MP4 format.
Answer
2011-01-03 16:14
Dante
D-ILA Projectors:
I have a JVC DLA RS1U projector which I've had for over 3 years now and been happy with its performance. If I remember correctly in the documentation my projector is HDMI 1.2 compatible on those ports. Is there a firmware update that can be applied thru the interface port that can make it HDMI 1.3 capable? Being an IT guy I would know how to do that if there were one available. I use a computer for many functions and I've found that the newer video cards will not synch up properly to the projector while the older ones will. This is over HDMI inputs. Specifically ATI video cards that are in the 5000 series won't work with it, while the 4000 series and prior do (I've tried a number of cards now and all exhibit this problem). Essentially the screen gets squeezed down and won't fill all the pixels with the newer cards. This is not a driver issue as the problem occurs even before the operating system loads on a pc. When i revert back to an ATI 4000 series card, the problem goes away but this doesn't solve my audio problem. This is making it difficult to watch blu-ray movies thru my pc which require the later video cards to support the HDMI 1.3 HD audio streams but those cards won't synch up with the RS1U on video properly as noted above. Any help you can provide would be appreciated. Thank you, Dante.
Answer
2011-01-03 21:27
david lasso
GY-HM150/100:
About codec. I record in .mov (1920x1080 60i) What is the best way to edit in final cut: xdcam ex 1080i60 or apple pro res 422?
Answer
2011-01-04 17:08
aldo de la torre
IP Security Products:
Hi how are you i hope so good my question is what is the password of the NVR N1600U?? because when i want to add a device, appear a dialog "Enter the password for the video device administrator account here" but i dont know what is the password i tried to put many passwords but doesnt work. i appreciate your help tks have an excelent day
Answer
2011-01-05 13:22
Lisa
Combo Decks:
I have a SR-MV45. For my job, I need to transfer many VHS, 3/4" and Betacam SPs to DVDs for archival storage. We need the best possible quality. We are on SP, and it should be recording 2 hours, but we are only get about 1 hour and 4 minutes of material on the DVD. How do we change the machine so it will record 90 minute and 2 hour tapes? And also will the quality be bad if we do change it? Thank you.
Answer
2011-01-06 09:44
Chris Pappas
Blu-ray Recorders:
I now understand that the only files for import via sd card must be .mov from JVC pro cam. However, I would like to import .m2t files from Sony z7 in this fashion. I understand that these HDV files are basically the same as JVC .mov but with a different wrapper. If you can tell me the specifics of the files and the SD directory structure the 1500 is expecting to find, then I may be able to re-wrap etc my files and create a JVC looking SD card for import. This is a very important function for me and I may have to return the unit if I can't resolve this. Any help would be greatly appreciated Thanks.
Answer
2011-01-06 11:43
crozell
Blu-ray Recorders:
when,you dupe a bdr on sr-hd1250us does it convert it to bdmv format and will it play on any bluray player.
Answer
2011-01-07 11:44
daryl ballou
GY-HD200/250U:
I need the pinout for the 26 pin CCU connection on the camera. Thanks
Answer
2011-01-11 03:39
Zack Johnson
Reference Series:
Will the 3D IR emitter interfere with IR receivers used with IR-repeater/extender systems (when the receiver is installed facing the viewer and directly facing the 3D emitter when installed to bounce the signal off the screen)?
Answer
2011-01-12 10:12
Euan
IP Security Products:
Can I get access to the windows XP embeded OS on the VR-N900 if so is their a default username and password?
Answer
2011-01-13 11:59
Antonio Espinoza
D-ILA Projectors:
How are the RS40 and RS50 different?
Answer
2011-01-15 14:23
johnathan
GY-HM150/100:
I just purchased a gy-hm100u and can not figure out if the .MOV format records in 35mbps. If so, what codec is it using?
Answer
2011-01-17 07:27
Frank Hoogeveen
Blu-ray Recorders:
Will these recorders also be available in Europe? If it's not will and imported recorder by me work in Europe (in Europe we have Pal-system). yours sincerely, Frank Hoogeveen
Answer
2011-01-17 09:56
Gabor Kertai
Pro Cameras:
Dear Technical Support, What are the exact CCD dimensions (or native pixel dimensions) for the ProHD series camcorders (models 100, 110, 200, 250, 700, 790)? I maintain a website (arenafilm.hu/alsog) with Depth of Field charts for several different camcorders, and this information would make the DoF calculations a lot more precise and reliable. Thank you very much, Gabor Kertai
Answer
2011-01-17 19:31
Frank McGuire
GY-HM150/100:
How can I capture the mp4 clips to me pc? Adobe Premiere Pro CS4, Wiondows 7. Clip manager that came with the camera won't run.
Answer
2011-01-20 09:09
Steve Auerbach
Blu-ray Recorders:
I recently purchased an SR-HD1500 Blu-Ray recorder. However, it refuses to communicate with my Final Cut Pro NLE via Firewire. Is there a solution to this problem? Thanks in advance for your prompt reply!
Answer
2011-01-21 11:26
Freddy McLennon
GY-HM150/100:
In 2007, I bought the Everio HD7 3ccd camera. Although it's a great camera I always had one problem. When I was recording continuously (a show or theater piece)I always lost 2 or 3 frames ( audio and video) between files when putting back together my recordings in the editing software. Is this resolved with the GY-HM100 camera or is there still a loss of frames between files during continuous recordings? Regards, Freddy McLennon
Answer
2011-01-23 16:36
Michael
GY-HM150/100:
can i use adobe premier elements 7 editing software. If not what editing software can I use on a PC, as i am a serious hobby enthusiast. this Q already asked but submittion may have failed? Mike.
Answer
2011-01-24 02:43
tremayne Scales
Combo Decks:
I have a SR-MV50U and i am trying to change the track while i am recording by hitting the record button and the track is not changing. is this an option with this unit? thanks!!!
Answer
2011-01-24 23:52
jeff rumble
Pro Cameras:
Is the camera suited to Cyberlink Power Director programmes for making movies.
Answer
2011-01-25 20:30
Michael Shea
GY-HM150/100:
I followed the instructions on how to download the new firmware for my GY-HM100U. What do I do after the Download to my computer is complete?
Answer
2011-01-26 13:05
Gary Symkoviak
Reference Series:
Can the RS60 use an anamorphic lens?
Answer
2011-01-28 21:43
Dan Asselin
Pro Cameras:
Is the 4-2-2 output on the gyhm100 an 8-bit or 10-bit feed. Thanks
Answer
2011-01-30 00:13
David James
GY-HM150/100:
I need to film a single piece of classical music that will be longer than the maximum 4GB file size. What will happen when I reach that limit? There can NOT be a gap in the music!
Answer
2011-01-30 02:08
James DeMeo
Blu-ray Recorders:
I have a pile of Sony Hi8 and Digital8 videotapes I wish to archive, and figure I can put from two to four of the 1-2 hour tapes on a single BD. I've got a nice Sony deck, a GDV200 unit, with DV output (also s-video). Will your SR-HD1500US allow me to make those transfers, at the highest density possible, and then burn them to the BDs? As I understand, your system firstly puts everything onto the hard drive, and then burns from that to the BD.
Answer
2011-01-31 00:59
Sarah
GY-HM150/100:
I have shot in mov format and would like to download from the sd card to my pc. but for some reason my pc does not showme that there are any mov datas on the sd cards. i can only see the mp4s. but on the camera disaplay i can watch all mov datas. why??
Answer
2011-02-01 08:45
Mickey Rivers
GY-HD200/250U:
Unable To Adjust Front Focus Our church recently purchased a jvcgyhd250 from our sister church. During the setup we discovered that the front focus was lockdown and unable to adjust it at all, there are no visible locking screws. How do we unlock the front focus? (Front focus will not adjust in either manual are auto setting) Thanks, Mickey Rivers
Answer
2011-02-01 09:21
Mickey Rivers
GY-HD200/250U:
Unable To Adjust Front Focus Our church recently purchased a jvcgyhd250 from our sister church. During the setup we discovered that the front focus was lockdown and unable to adjust it at all, there are no visible locking screws. How do we unlock the front focus? (Front focus will not adjust in either manual are auto setting) Thanks, Mickey Rivers
Answer
2011-02-01 17:24
Zach Rist
GY-HM150/100:
So here recently I got a new SD card and in both A and B slots it says cannot use in video mode.... And the SD card is for video filming so what is my solution
Answer
2011-02-02 06:49
simone
GY-HM150/100:
Salve vorrei avere informazioni tecniche su quali parametri impostare per riprendere l'aurora boreale in finlandia (settimana prossima faccio una spedizione) e se ci sono particolari accorgimenti a temperature di -30 °C per la videocamera. Grazie per l'attenzione . Simone da Milano
Answer
2011-02-02 07:29
Cristian Zalazar
GY-HD110U:
How swich video out to 4:3, Whit out black banners on the screen? Thanks
Answer
2011-02-03 21:33
Ken Norris
Blu-ray Recorders:
I see we are about to move to the next generation of SD cards with the SDXC cards due out soon. I am looking now at a camcorder that will use that card-see the format is backward compatible but current hardware must meet the new SDXC spec to make them usable. Can the SR-HD1500US accept a firmware update; when and where might we get that if it is possible?
Answer
2011-02-04 11:02
Greg
Reference Series:
When using a ceiling mount do you only use the holes where the feet are or can you use the 2 holes towards the front above the lens as well?
Answer
2011-02-04 15:15
Phil
GY-HM150/100:
There are three color matrix settings in the camera process menu of the GY-HM100u: standard, vivid color and subdued color. On standard setting even on a properly exposed image, bright colors (reds, oranges) are clearly oversaturated on a vectorscope. The subdued color setting corrects this but everything is less saturated. Could you address this issue in a firmware update?
Answer
2011-02-04 15:51
attila fazekas
GY-HM150/100:
Can the camera capture GPS data into the metadata using a GPS receiver?
Answer
2011-02-05 08:23
Petur Johannesen
GY-HM700/710/750/790:
Hi. I have a jvc gy-hd700 and a Mac adobe premier pro cs5. How could I use my .mov footage in the cs5?
Answer
2011-02-07 01:10
Danny Colomby
GY-HM150/100:
Can I use a polarizing filter on this camera? I'll be shooting on water and want to cut some of the glare to see into the water.
Answer
2011-02-07 22:56
Nick giacomantonio
D-ILA Projectors:
I have the dal-rs15u and need to obtain new remote control. Where can I get one. And what price please Thank you!
Answer
2011-02-09 04:18
MARCELLO
Reference Series:
I've one question about JVC DLA-RS60U 3D projector: In the basic price comes with two 3D pairs or two 3D glasses??
Answer
2011-02-09 11:37
michael Paley
Reference Series:
Can this work with a motorized anamorphic lense kit?
Answer
2011-02-09 23:07
Steve
Pro Cameras:
I am considering purchasing the jvc gy-hm700l17s package. Will the SanDisk Extreme® Pro™ SDHC™ UHS-I card 32GB cards work with this camera.
Answer
2011-02-11 14:20
Kyle Carr
Pro Cameras:
We are having problems batch capturing with the JVC GY-HD250 in Adobe Premiere CS5. The footage is originally shot at 720 60p and the Premiere project settings match. We can manually capture each clip and be able to use them but we have been unable to batch capture logged clips inside of Premiere. Any help is much appreciated. Thanks
Answer
2011-02-11 14:55
Fabio Porto
GY-HM150/100:
I need the codec to turn a file MOV that I recorded in my GY-HM100U... Where can I find?
Answer
2011-02-11 15:42
Richard Welch
Blu-ray Recorders:
What class of SDHC card will work with the SR-HD1500US I shoot on the JVC GY-HM100? I shot some footage on a Class 10 card and can't get it to transfer to the HD1500US. Thanks
Answer
2011-02-14 08:37
Jonathan Glisson
GY-HM150/100:
Just bought this camera and did not realize we would need special software to open the files. I will say and complain that your website is a little misleading in that you guys advertise that this camera records is mov and mp4 files (two of the most common formats) however you do not stress that you would need a $900 program to run them. Just saying that this is quite misleading. Regardless, my question regarding this camera concerns this issue. I checked your faq recently to see if there was a way to convert / view these files on my computer. Other than fcp6, there was a line about certain Quicktime components that you could purchase that could make this happen without fcp. What are these components? We are in no position to buy fcp and so if we cannot find the correct components then this camera is useless for us and we will simply have to send it back, but I was looking for a solution that would make this work without sending the camera back.
Answer
2011-02-16 07:06
rosie
Pro Cameras:
I VIDEO TAPED A WEDDING ON A JVC, I AM TRYING TO EDIT WITH A CYBERLINK SOFTWARE, IT IS ASKING ME FOR A DECODER, WHAT IS IT?
Answer
2011-02-19 13:23
Jonathan
GY-HD200/250U:
We have 3 GY-HD250 cameras, all with RM-HP250AU remote units. I have checked all of the connections and both camera and remote control unit is turned on. One of the Remote control units is saying to "Please Check The Camera" and the remote doesn't have control over the camera. Also, the monitor out is no longer working. I checked the monitor and the cable and both worked for the other cameras, so I assume that the issue is with the Remote Control Unit or Camera. What do I need to do to fix this problem?
Answer
2011-02-22 09:02
Jonathan
GY-HM150/100:
I recorded some video in MP4 format and imported it into Adobe Premiere CS3. The video plays fine, but the audio doesn't play at all. Why?
Answer
2011-02-22 15:37
Lulu Kane
GY-HM150/100:
what do i need to use in Hong Kong when not on battery? need by March 1 2011
Answer
2011-02-22 16:00
Terriel Foster
Blu-ray Recorders:
I just unpacked our Blu-Ray SR-HD1500. Why won't it record to DVD-R discs? Message box reads: "UNABLE TO PERFORM DIRECT RECORDING ON THIS DISC, USE A BD-RE OR DVD-RW DISC" Thanks for your help.
Answer
2011-02-23 20:57
Daniel Wong
GY-HM150/100:
Hi there, I'm currently using the GY-Hm100 as our livestream camera for wirecast. I do have a problem clearing the information on display. Things like the Record mode, battery life, recording status, memory cards etc. Is there a way to completely clear this? Thank you
Answer
2011-02-23 20:57
Daniel Wong
Pro Cameras:
Hi there, I'm currently using the GY-Hm100 as our livestream camera for wirecast. I do have a problem clearing the information on display. Things like the Record mode, battery life, recording status, memory cards etc. Is there a way to completely clear this? Thank you
Answer
2011-02-25 01:10
Frederico
Reference Series:
Best cable to conect with onkyo receiver TX-NR708 Would I need a switch or splitter to conect both, my tv and projector RS40, to my receiver? Do I loose 3D image quality using splitters and or switchers? Wich is the best screen?
Answer
2011-02-26 20:28
Kevin Dauernheim
GY-HM700/710/750/790:
I just purchased 2 Transend class 10 memory cards. They will not format. The class 6 cards are fine. Please help!!! Kevin
Answer
2011-02-27 16:41
Sai
D-ILA Projectors:
I've just purchased a DLA-RS25. I plan to have rear projection from the ceiling. I hear the top of the projector (top of the lens?) needs to at least line up or be below the top of the screen line. There's no information on this in the manual. What is best for this configuration? Thanks, Sai
Answer
2011-03-01 04:40
Krzysztof Kamiński
GY-HM700/710/750/790:
Recently, 64 GB SDHC cards. Can be used in HM700?
Answer
2011-03-01 19:11
HL Weinstein
Reference Series:
1. Your website shows a software download for the RS60U3D about Blue Ray DVD Player compatibility, but no instructions on how to do the download. I just received my projector, so is the download for the firmware version 1.1 already installed? 2. This projector has wireless internet connection. I already have a wireless router with my PC, but my DVD Player also has wireless internet connection. Wouldn't this be redundant and which would be better to use, the projector or the player?
Answer
2011-03-04 08:35
Allan
Blu-ray Recorders:
I have a jvc sr-hd1500. I am able to record to the HDD and record from the HDD to a Blu-Ray however the Blu-Ray will only play back in the 1500 and a computer. They will not play back on any other Blu-Ray player. The disks have been formatted and finalized. What am I doing wrong?
Answer
2011-03-05 15:56
pedro bastos
Pro Cameras:
I had a software pro hd clip manger on the windows 7, and it can provide the export to mpeg2. now i had reinstaled it, but it haven´t this funtions. how can i upgrade this software?
Answer
2011-03-09 10:50
Dean Vincent
Pro Cameras:
I have two JVC digital camcorders, and I'm ready to add the GY-HM100U model. Is there a newer comparable camera on the market since this one appears to be approaching two years old?
Answer
2011-03-10 08:46
Dominic
GY-HM150/100:
This is a request from a customer who recently purchased some cameras. If the file is native QT.MOV what is need for the files to work in AVID MC 5.5? The customer claims to have the latest version of QT installed on the machine, however the video is black and they only get audio. This is whether playing back in QT or importing the video into AVID.
Answer
2011-03-11 07:32
John Carlin
Pro Cameras:
i need to export my footage shot on the JVC GY-HM700 to DV. What is the simplest way of going about this?
Answer
2011-03-12 12:30
Ron Sutphin
Reference Series:
Will the RS40 do v-stretch in 3D mode for use with an anamorphic lens and 2.35 screen.
Answer
2011-03-12 18:30
Gary
GY-HM700/710/750/790:
Can I use the 700 as a webcam?
Answer
2011-03-13 00:59
Jason Bolton
D-ILA Projectors:
I purchased the DLA-RS40, a Panasonic DMP-BDT110 Blu-ray player, and an Onkyo HT-S3300 Home Theater Receiver. I can play 3D fine going from player through receiver to projector, but when I watch a 2D movie converted to 3D which displays it top and bottom, it does not work. It displays the top and bottom image, but selecting auto or top and bottom in HDMI 3D settings does nothing. It works fine hooking the player directly to the projector.
Answer
2011-03-16 16:03
James Hodge
GY-HD110U:
All of my footage HD and SD have a grainy look to it instead of being clear. It's not the gain, I have it set to low. I'm not sure what else it could be.
Answer
2011-03-17 08:34
Bob Albrecht
GY-HM150/100:
Can the Gy-HM100U burn the Date and Time Stamp into the video? While recording to SDHC cards and an external recording device via the composite A/V output, will the date and time stamp be included on both recordings?
Answer
2011-03-17 11:58
Kevin
GY-HM150/100:
I need the time and date to show on the recorded video. For the life of me, I can't find anything about that in the manual. Does my model have that ability?
Answer
2011-03-19 00:11
rob
GY-HM150/100:
when i try to use mp4 files in sony vegas 10 it says The file is most likely corrupted or of an unknown format. i am shoting 1080 25p in a pal country and using a pc.
Answer
2011-03-19 09:46
Manny du Mont
GY-HM150/100:
I have a GY-HM100U and I love the camera. However, there are a few dead pixels on the screen. I have brought it in to a Maintenance shop, but they seem lost. I have read there is a way to fix the dead pixels on the GY-HM100U. Please send those steps to me.
Answer
2011-03-21 11:45
Ed
GY-HD200/250U:
New owner of JVC GY-HD200 / 250U. Some questions! Can I record to tape and SD Card simultaneously? What size/type Cards can/should I use? How do i get information from the card into MacPro? What settings do I have to change in the camera to use it with Card and tape? Am I restricted to any particular format on the Card? Any info. would be appreciated.
Answer
2011-03-24 04:41
rasha
FAQ pages:
the camera is fall and after opening it a message "please format " appeared what should i do
Answer
2011-03-26 00:39
Tung Nguyen
GY-HM150/100:
Will SD HC SDHC Memory Card Class 10 works with this model? Thanks
Answer
2011-03-26 06:49
Dan Wenger
Blu-ray Recorders:
When will we see a Blu-Ray recorder with SDI-HD I/O?
Answer
2011-03-27 12:58
Michael Molina
Reference Series:
Are the new 3D projectors no longer equipped with the V-Strech feature to allow use with Panamorph lens systems to allow display on a 2.35 screen?
Answer
2011-03-27 16:53
Steve Hockey
GY-HM150/100:
What does the Audio Reference Level Setting menu item actually do? Does it effect the recorded audio level? I recorded some video with the audio levels set appropriately according to the level meters, but when I play this back the audio level is a bit low. Does the reference level make a difference to the overall recorded audio level?
Answer
2011-03-31 15:25
Janis Griezejs
GY-HD110U:
Will new "SanDisk 32GB Extreme Pro SDHC UHS-I " Memory Cards work with GY-HD110U ?
Answer
2011-04-02 12:46
Simone Hogan
GY-HM150/100:
I shot footage in 720/30p on the hm100 that looks fine when simply opened with Quicktime Player, but has horrible dancing artifacts on all vertical lines when played on my FCP 7 timeline. When I imported the clips into the FCP project, a window popped up to suggest I should adjust the sequence settings to my footage. I did. So why the bad artifacts? (And I mean REALLY bad. Unusable video.) What am I doing wrong? What is the correct FCP project and sequence set-up?
Answer
2011-04-03 05:18
Rusty Martin
GY-HM700/710/750/790:
I have an HM700. Is there any way to turn off the embedded audio for SDI? The camera is giving off an audio hiss. I'm recording to a Grass Valley T2 DVR. And I can't turn it off on the DVR.
Answer
2011-04-03 18:30
Carlos
Blu-ray Recorders:
Can a live feed be recorded onto the internal HDD in real time via firewire or other input?
Answer
2011-04-03 19:15
Dee Emery
D-ILA Projectors:
Has there been any firmware or software update for a RS 25 since produced in spring 2009"?
Answer
2011-04-04 12:24
Trent Walker
GY-HM150/100:
I recently bought the gy-mh100u and have had difficulty re-entering the world of camcorders and editing. I use Adobe Premiere CS4 and I have an older version of FCP Express 3.5.1. I recorded about seven clips today and when I go to import them into Premiere I see all seven of them, but they are all a copy of the first one. I can playback (audio & video) on the camera itself, but I can't get to the other six files on the sd card. The file format was set to .MP4. I believe I have all the correct codecs and have had success in editing clips in the .MOV format. The third party forums on this topic are very discouraging. Please help.
Answer
2011-04-05 23:46
Archana
GY-HM150/100:
Which Class 10 SDHC card is advisable for this camera? Will Transcend 32GB SDHC Class 10 work fine?
Answer
2011-04-06 02:11
SR- HD1500EU
Blu-ray Recorders:
Hi! We have a rear panel with SDI embedded inputs. I would like to know if it's possible to record a 5+1 audio signal directly from the SDI embedded input?
Answer
2011-04-07 11:16
Kennedy Maxwell
Pro Cameras:
The image is toggles between the LCD and VF when the LCD door is opened and/or closed. This function became in-active today and the "display" switch must be used to toggle the image. How can the LCD door toggle function be restored?
Answer
2011-04-08 03:40
Charles
Pro Cameras:
How do you capture gy-hd250 video with sony vegas 9?
Answer
2011-04-08 06:03
Joel Paez
Combo Decks:
to connect the decks immediately turns on the word "please wait" and does not stop blinking and never turns on the decks
Answer
2011-04-11 05:38
Ken Andrew
GY-HM700/710/750/790:
We have tried to back up files we have stored on an external drive using JVC Clip Manager on a Bluray disc but a message tells us that we can't do it because we don't have the right privileges. How do we get round this?
Answer
2011-04-13 10:51
bob mayer
GY-HM150/100:
does the battery pack that comes with the GY-HM100U support usage overseas, i.e., can it be plugged into 220 voltage?
Answer
2011-04-14 07:18
Nick Browse
Blu-ray Recorders:
I'd like to connect a camera with HDMI out to the SR-HD1250US recorder using using an HDMI-HDV converter (Grass Valley AVC-HD50), but record audio from the analog input connections. Is this supported?
Answer
2011-04-14 09:29
Jim
Blu-ray Recorders:
For the SR-HD1500US: When inputting video via HDV connector, if the audio is not embedded will the recorder use audio supplied on the RCA audio input jacks instead? I would also appreciate a phone call at 303-893-4787. Thank you.
Answer
2011-04-16 12:59
Justin Annandale
GY-HM150/100:
Does the GYHM100 work with Avid mc 5.5?
Answer
2011-04-16 18:39
William Currie
Projectors in general:
My RS-1 has just started cutting off without warning. The status light even goes out, After 15 min or so, the red status light returns and the projector can then be turned back on but it powers off again after about 20 min. I've checked the lamp, filter and confirmed the fan is operating. Any ideas?
Answer
2011-04-20 09:46
Robert D\'Alessio
Pro Cameras:
We have a GYHM750 camera with a KA-AS790G ASI adapter on the back. My question is in three parts. 1.)Does the ASI adapter have any menu setups that show in the viewfinder or thru some kind of interface? 2.) Does it always output an ASI signal or only when you are set for an HD format such as 1920x 1080 or 1280 x 720 60pHQ if so what are the specific set ups for the ASI to output. 3.) When you feed the ASI to a 2GHz uwave Transmitter that has a 19.39MB/s max how far down do you have to set your output to get that rate...will 1280x720 60pHQ work or do you have to go to 60pSD or even lower? Thanks Bob D'Alessio
Answer
2011-04-21 13:16
Robert D\'Alessio
Pro Cameras:
I hope what I read in your KA-AS790G ASI Adapter manual about cable length max is 10 meters is wrong or misprint. The intended use for this unit is to feed an HD ENG feed to your uwave from your camera and 39 feet just too short for most standard shots. With the intended bitrate not to exceed the 19.39 MB/s rate a 2GHz uwave can handle I believe with Belden 1694 cable you should be able to get about 200 to 300 feet at least. Please clarify the data in your manual to verify your data or change the suggested length. Thanks, Bob
Answer
2011-04-22 23:06
Dodd Clephan
Blu-ray Recorders:
As yet I have not been able to burn an mv blueray disc on my SR-HD1500 and access the menu. On attempting to access the menu the disc will usually freeze and has to be ejected and restarted. The material is AVCHD. I did encode a file to AF thinking this might be the solution. However, this was worst, the disk was unplayable. The Sr-HD1500 wound't even play it. Any suggestions would be appreciated. Material does play fine when recorded in the av setting.
Answer
2011-04-23 07:37
mat
GY-HM150/100:
I get this error message when I try to use ProHD Clip manager; "GetFileVersionInfoExW could not be located in dynamic link library VERSION.dll." How can I solve this problem?
Answer
2011-04-23 16:17
Chris Miller
D-ILA Projectors:
JVC does not currently sell front projectors through JVC authorized internet dealers. If I purchase a new, factory sealed projector (RS50) from an internet dealer, will JVC's warranty still cover the product?
Answer
2011-04-24 20:59
larry stough
Reference Series:
just installed my rs40 and updated the software to 1.3. im ceiling mounted and my picture is inverted. this may be a stupid question but how do i invert the picture?
Answer
2011-04-25 12:21
Edie
GY-HM150/100:
What settings allow me to record from both xlr inputs at the same time? I have two receivers connected to the camera via XLR cables, one in input 1, the other in input 2. I am getting no sound when switch is set to input 1 and only sound from input 1 when switch is set to input 2.
Answer
2011-04-25 17:04
Allan Jennings
Reference Series:
What does is the black level setting for on my RS40. How is it used? There is no explanation in the manual on what the displayed squares represent when using the control.
Answer
2011-04-25 21:07
John Simmons
Blu-ray Recorders:
Can I connect A Compact Flash reader to the USB input of my SR HD 1250 and copy video from A Compact Flash card to the units HDD?
Answer
2011-04-26 08:23
Robert D\'Alessio
Pro Cameras:
We have your new GY-HM750 cameras with ASI adapters KA-AS790G on them.I had sent this question about a week or so ago but have not had a reply yet. Here is the question: In your manual for the ASI adapter on page IV(4) you show a recommendation on cable length for the ASI port of only 10 meters. I hope this is a misprint because the whole purpose of getting ASI modules was to feed our uwave transmitters with a HD stream that would not exceed the 19.39 MB/s bandwidth they are capable of. With the camera record settings at 1280 x 720 60p SP mode should give us 18.3 Mpbs.I had an understanding that ASI should give us over 250-300 feet using Belden 1694 cable with no problems. Can you please confirm or revise the data that is listed in your book. What would be the point in buying the ASI adapter if you can only go 10 meters. Any thing you can provide would be helpful. Thanks, Bob D'Alessio KSL TV
Answer
2011-04-28 13:00
BR
Pro Cameras:
Is there a media playback device that will "play" the SD cards recorded by the JVC GY-HM100u when recorded in the 1440/60I (HQ) mode, via an HD-SDI port (for ingest and capture to a server, rather than using file transfer to a non-linear editing system)? For instance, SxS cards recorded on the SONY EX1 can be played out of the SONY PMWEX30 XDCAM EX Memory Recorder. Is there a similar device for the JVC 100? I've seen a few JVC Blu-Ray devices that say they can play SD cards recorded on the JVC 100, but those devices specify they will not play the 1440/60I (HQ) mode.
Answer
2011-04-28 13:08
Barry Romanski
Pro Cameras:
Is there a media playback device that will "play" the SD cards recorded by the JVC GY-HM100u when recorded in the 1440/60I (HQ) mode, via an HD-SDI port (for ingest and capture to a server, rather than using file transfer to a non-linear editing system)? For instance, SxS cards recorded on the SONY EX1 can be played out of the SONY PMWEX30 XDCAM EX Memory Recorder. Is there a similar device for the JVC 100? I've seen a few JVC Blu-Ray devices that say they can play SD cards recorded on the JVC 100, but those devices specify they will not play the 1440/60I (HQ) mode.
Answer
2011-04-29 02:04
Leandro
Blu-ray Recorders:
Dears, We have a JVC blue ray disc, model SR-HD1500US and on the screen of the unit, his showing REMOTE 1, and the remote control doesn´t work. I´ll still trying to follow the manual to solve the problem but I couldn´t. I apreciatte some help. Thanks.
Answer
2011-04-29 13:30
Lawrence Chanin
Reference Series:
Do you have a web page where I can register my newly purchased RS40 along with its accessories, i.e. synchro emitter and glasses? Thanks.
Answer
2011-04-29 23:54
Thomas W. Silkwood
Pro Cameras:
I have the GY-HM700U. We love the camera but I need to replace my old JVC studio cams and want to save some money. YOur GY-HM100U looks like a good choice expect if outputs to HDMI and my switcher needs SDI. HDMI is really limited on the length of cable so I must have SDI. I have noted that Datavideo has HDMI to SDI converters but I'm not too keen on Datavideo. What can I do about this other than using a converter or spending a bunch more money on two more 700 models? I bypassed the 790 due to cost issue. Is there a work around that is good? Others are suggesting I look into Sony but have a studio in Thailand and Sony's services is very poor while JVC is excellent. I would like to stick with you guys but my budget is pretty thin. Finally, would there be any plans to replace the HDMI output to an SDI? That would be great. Thanks, Thomas W. Silkwood, Director Freedom Films Productions
Answer
2011-04-30 12:59
Chiara Frisone
Pro Cameras:
Hello My HM100U refuses to focus when I take the wide angle converter off. I'm gong MAD. I put a wide angle converter on my HM100U. Great. Fine. Then I took it off and all of a sudden, the camera refuses to focus, pictures are blurred, wavy, crazy. Then, I put the wide angle back on and magically, it's fin! HELP! I'm going mad! How do I go back to use my camera without wide angle? Why is it not focusing? It doesn't focus on manual, it doesn't focus on automatic. It simply refuses to focus without the wide angle on! Chiara
Answer
2011-05-02 11:15
graham
GY-HM150/100:
Ive downloaded the firmware update... I want to make sure Install it correctly from the computer to the camera... How so?
Answer
2011-05-06 10:38
Peter
Blu-ray Recorders:
Can i record video onto the SD-card?
Answer
2011-05-06 16:29
Rory Hinds
Reference Series:
I had an issue with a DLA RS40 that has been sent back for replacement and wanted to ask a question on this forum... I could not get a image to display using HDMI into the RS40 but I could display the same signal on my older JVC DLA HD100. I'm using this projector in my film color grading suite and have it connected to my workstation. The signal is 1920x1080 23.98fps Progressive coming out of a nVidia SDI graphics card into a BlackMagic HDLinkPro Displayport 3D and connect to the projector with a Displayport to HDMI cable. As I've said the signal worked fine with my HD100 but wouldn't work with my new RS40. Do you know what it work on my older projector but not on my newer one?
Answer
2011-05-11 08:56
Ni Shah
GY-HM150/100:
Question: System settings/Record Mode JVC GY-HM100U by Niya Shah on May 9, 2011 at 8:11:59 pm Would love your input - what is the best System settings & Record Mode for JVC GY-HM100U? The project is a short documentary that will be screened in house as well as streamed online. System - 1080-60/30 or 720-60/30 or something entirely different? Rec Mode -1920/60i(HQ)? Also, what are the best correlating settings for ingest into FCP 7? Any tips or tricks would be GREATLY appreciated. Thank you! Niya
Answer
2011-05-11 11:52
Noman
D-ILA Projectors:
Dear Sir I just purchase Rs 60 projecter when i saw 3d movie my all other device ir remotes hang they obly work with very near distance but if i saw normal movie they work fine pls inform about the solution regards Noman
Answer
2011-05-13 11:45
jeff bell
D-ILA Projectors:
What are the meanings of warning lights. I have 2 steady red and one flashing orange
Answer
2011-05-13 13:50
Jeff Bell
Reference Series:
Hi JVC, I have a new JVC DLA-RS50U 3D projector. There are 3 warning indicator lights. 1 and 3 are steady red and 2 is flashing orange. Can you tell me what's up?.
Answer
2011-05-13 13:52
Jeff Bell
Pro Cameras:
Hi JVC, I have a new JVC DLA-RS50U 3D projector. There are 3 warning indicator lights. 1 and 3 are steady red and 2 is flashing orange. Can you tell me what's up?.
Answer
2011-05-14 08:38
Brent Gadbury
Blu-ray Recorders:
Will datavideo se-800 dv av mixer work with the jvc sr-hd1500 using the hdv/dv input (FireWire)? If not what av mixer do you recommend that maximizes picture quality?
Answer
2011-05-14 09:26
Gary Zinkann
GY-HD110U:
Can you explain the LoLux feature in more detail?
Answer
2011-05-15 14:44
Carlos Davila
Pro Cameras:
How do I get sound on my ustream wit my COMPACT HAND-HELD 3-CCD CAMCORDER?
Answer
2011-05-17 00:37
Jose Nunes
Pro Cameras:
I consider JVC HM-700 a great camera (I have one), but it would be perfect if it could record also in AVI format. What does exactly the Vers. 3.0.3 build 030211 upgrade? I did not upgrade yet... Thanks for your help!
Answer
2011-05-20 06:42
nick
Pro Cameras:
Can the gy-hm100u be edited on final cut express?
Answer
2011-05-20 07:49
nick
Pro Cameras:
can final cut express-hd edit files from a COMPACT HAND-HELD 3-CCD CAMCORDER GY-HM100U?
Answer
2011-05-20 08:01
mark blomeke
Blu-ray Recorders:
Can you input/record a live HD signal from a JVC gy-hm790 camera onto the HDD of the SR1250? I know that you cannot burn a disc live. What input would you use on the unit and are there any format limitations? Thanks.
Answer
2011-05-20 10:07
Ronald Morrill
D-ILA Projectors:
I got the warning to replace the lamp in my DLA-RS1. I got the genuine JVC replacement and installed it. I continue to get the replace lamp warning despite, many times, doing the reset lamp time sequence. After doing the sequence (yes, I held the down button for more than 2 seconds) the projector does NOT go into standby mode and the lamp warning reappears next time the projector powers on.
Answer
2011-05-21 12:00
Tim Lindop
Pro Cameras:
My tape door jams when I try to eject a tape in the camera, requiring me to disasseble the door to swap tapes. How can I fix this? Tim
Answer
2011-05-22 13:50
Ken
GY-HD200/250U:
Our GY-HD250 camera has begun to smear. The op manual says this is a function of the CCD. Since this is a n new problem, has the CCD gone bad?
Answer
2011-05-23 13:59
Kyle
GY-HM700/710/750/790:
I have a GY-HM700U that I am trying to use with Adobe OnLocation (or any capture software for that matter). When I plug in the Firewire cable, Windows will detect new hardware, but when I load up the OnLocation, it will not give me access to the camera. I am using OnLocation 5 and Windows 7 x64. I have read about the wrong drivers being installed by windows, but cannot find the "correct" drivers to install to make it work. Any help is appreciated.
Answer
2011-05-24 10:19
Matthew
D-ILA Projectors:
What is the meaning of the flashing error lights on my RS-2 projector?
Answer
2011-05-25 08:16
David Abarca
GY-HM150/100:
The zipped file for the firmware update is corrupted. I can not update the HM100 to use the new Class10 SDHC. Please help! It is urgent... David David and Joseph Caracas
Answer
2011-05-26 10:14
Ali Grossman
Pro Cameras:
I shoot in mp4 for avid and experienced problems 3x in the last week. The first time was a 1/2 hour clip which the camera indicated a "restore media" error. I was not able to restore the clip in camera but I was able to import the shotbdirectly into the avid. It was segmented into 3 segments, 2 with identical lengths. However, no harm done. now, I. Am unable to access several long clips that were shot a week later. Many clips from the same cards were imported successfully but these missing clips, although on my exterior hard drive, will not import into avid. They are segmented, I.e 703-01, 703-02, 703-03. The files on the exterior hd indicate that they are large files so I am HOPING that I will be able to recover/access them. Argh. They are, of course, my most important clips. I think it is a file wrapper problem but neither of my problem clips indicated a "restore media" error. I was able to successfully transfer the whole folder back to a card and play some of mt missing clips in camera but then after awhile the camera froze and the red flashing alarm was activated. HELP (please call).! We are considering purchasing several more cameras but will not do this until we regain confidence. 307-760-3876 Thank you, Ali
Answer
2011-05-26 14:10
Jacob Johnson
GY-HM150/100:
I am able to capture live video into FCP with the AV output thru a video converter. How can I clear the status information off the display in order to capture a clear image for video webcasting?
Answer
2011-05-28 11:32
Dieter Valter
Blu-ray Recorders:
How to delete all data from SR-HD1500US Hard disk drive (HDD)
Answer
2011-05-31 08:14
Will Moss
Blu-ray Recorders:
Is it possible to make a playlist from multiple titles instead of just chapters? I'm using the SR-HD1500 ... Thanks!
Answer
2011-05-31 13:51
Mark Gutierrez
GY-HM700/710/750/790:
How do you get rid of a dead pixel? I have a jvc prohd gy-hm700chu camera that has some dead pixel popping up and would like to get rid of them. Looking online I have found forums that show me how to get into an advance menu on the camera. Down below is the steps.... .WARM CAMERA FOR 30 MINUTES .SET CAMERA TO 720 60P .POWER-UP PLUS PUSH THE DISPLAY BUTTON AT THE SAME TIME WHILE CAMERA IS POWERING. .PRESS....MENU PLUS FOCUS ASSIST BUTTON AT THE SAME TIME .ADVANCE MENU WILL APPEAR .SCROLL TO ADVANCE FUNCTION .PUSH: SET BUTTON .SCROLL TO THE WORD: PIXEL COMPENDET .PUSH: SET TO EXECUTE .NOW: PHYSICALLY EXECUTE THE PROCESS .EXECUTING WILL FLASH THEN STOP NO MORE DEAD PIXEL(S) I have gone through these steps and now cannot get back to a regular picture. I have a black screen. Oh the good thing is that the dead pixels are gone but need to get the picture back. Help!
Answer
2011-06-01 08:34
Israel Alvarado
Reference Series:
Is there any way to adapt cine-wide/AutoScope (I mean anamorphic/cinemascope stretching lenses)to the projector for 2.40:1 aspect ratio material, so you can eliminate black bars in top and bottom of the screen? Are this projectors compatible with this?
Answer
2011-06-04 22:22
Ivor Van Graan
Blu-ray Recorders:
The SR-HD Blue ray recorder / burner is it available in 220 v ac and can it record PAL
Answer
2011-06-06 03:10
Keith Dallison
Blu-ray Recorders:
How can we reset the remote hand control unit on a SR -HD1500 Blu-Ray when it the code has beenchanged on the main unit? The hand unit no longer talks to the main unit and therefore cannot display setups.
Answer
2011-06-06 14:39
Gustavo Rosta
Blu-ray Recorders:
There is any 3rd party video interface to record component video to Firewire (iLink)that you recommend. Specifically for the SR-HD1250US. Thank you,
Answer
2011-06-07 09:37
Tracy Foust
Pro Cameras:
I have the GY-HM100u and am trying to use the available firmware upgrade to enable my camera to use the class 10 SDHC Cards. When I go to the firmware web page and follow the directions to determine the existing software in the camera, I get the following message: We are unable to determine current version of software you have. Click here to go back and try again. I have tried several times with no results. The values that are displayed on the camera LCD screen are as follows: CURRENT VERSION: CAM 1.07 ARM 1.05 EEPROM052 I have entered the numbers without the decimal points and with but have not been able to get past the error message. Can you assist?
Answer
2011-06-08 13:17
Mike Bailey
GY-HM700/710/750/790:
I read the response in regards to the 700u outputting a signal at 4:2:2 but recording at 4:2:0. Does the gy-hm750 record at 4:2:0 as well?
Answer
2011-06-10 00:16
Lance
Pro Cameras:
Just bought a new JVC GY HM100U. Also a new macbook dedicated to media for our nonprofit. Shot some clips but can't get them to open in iMovie 11. Getting message may need more software. When I try to open in JVC Clip Manager I get the same. I can play the clips on the camera. Using SD Class 10 chips. Please tell me I don't have to spend $1000 for FCPro.Many thanks in advance. Love the camera but may have to rethink the whole thing while can still return. Don't want to but as I said we're a small nonprofit and this has to work for us.
Answer
2011-06-13 06:12
Souza
Blu-ray Recorders:
I have one SR-HD1500US, but bought another recorder the SR-HD1500. This one have the OSD in Nippon(?) it's possible change the OSD and other functions to English by firmware update?
Answer
2011-06-13 10:03
Javier
GY-HM150/100:
if i am in camera mode and take the video output from HDMI will I lose my side camera monitor?
Answer
2011-06-15 06:26
Sean Comber
Pro Cameras:
I am using a JVC GY-HM790U and it seems that no matter the subject out focus is very sharp on the LCD monitor yet very soft when we bring it into FCP, this is even true for the NTSC bars. Is there an import setting that we are not properly following?
Answer
2011-06-17 11:03
Mike Pulskamp
GY-HM150/100:
How can I make an instant backup card? Can I record to two hd cards at the same time? I have been asked for a raw copy and I also need to take one back for editing.
Answer
2011-06-20 07:02
Dan Plus
Pro Cameras:
I have a JVC Professional Series SR-MV45. It records and burns over to DVD just fine and playsback on monitor but when I try to play the DVD on my laptop's it doesn't play. Windows XP sp3 shows the DVD as a blank.I tried three different viewers. Do I need some special codec or converter?
Answer
2011-06-20 16:31
Robert Howard
ProHD VTR:
My jvc DVM700 device is displaying please wait after connecting it to power source. And stays on that message forever what should i do?
Answer
2011-06-20 19:30
Vicky Hess
Blu-ray Recorders:
Can I record programs from the Dish Network to the JVC SR HD1250US? I am looking at getting a Dish DUO VIP222K. Does Dish Network restrict recording of any channels? Do they implement a Digital Broadcast flag which would prohibit me from recording with a JVC SR HD1250US? And, then I would like to copy the files to a Blu-Ray Disc that can be watched in any Blu-Ray player. Thank You, Vicky Hess vhess@ix.netcom.com
Answer
2011-06-21 13:43
Bill Kistler
Combo Decks:
Is there a document that lists the available IR commands?
Answer
2011-06-22 06:07
JcP
Blu-ray Recorders:
Is it possible to record directly to a DVD-R disc from a live video signal with the BLU-RAY DISC & HDD RECORDER SR-HD 1500US ?
Answer
2011-06-23 09:13
Joseph Graziano
D-ILA Projectors:
Will the DLA-RS40 support the format that vudu 3D side-by-side 1080p@24HZ is streaming?
Answer
2011-06-25 11:56
Scott Loper
GY-HM700/710/750/790:
I have only the CLPR folders from footage that was recorded on a GY-HM700CHM with files that are in the MP4 wrapper. I have FCP 7.0.3 on a Mac running OS X 10.6.7. What is the workflow for importing this media into Final Cut Pro?
Answer
2011-06-27 17:40
Candace Egan
GY-HM150/100:
I have one file on the SD card that has the QT generic icon and won't play in QuickTime or VLC, but will play back in the camera. I've seen others mention this problem on other forums, but no answer as to how to get the footage useable. This was not a part 2 file, as some have had this problem with. I think I turned the camera off too quick without the file getting "closed".
Answer
2011-06-28 07:45
Tony Baker
D-ILA Projectors:
We are working with a small college that has an existing 20' wide screen, will the RS40/50/60 series projectors be adequate with a screen that large?
Answer
2011-06-29 11:31
Remon Scheinhardt
GY-HM150/100:
What exactly does the audio reference level parameter stand for? It can be set to either -20 dB (default) or -12dB, it says in the manual, but an explanation is not given.
Answer
2011-06-29 14:02
steve
GY-HM700/710/750/790:
I can't see video from 1280x720 sp 18.3 mbps using 750 (hear audio only) but can see video using 1280x720 hq 35 mbps AVID media composer 5.5.2
Answer
2011-07-04 09:34
Anil
Reference Series:
RS40U with 3 d emitter and glasses, Comcoast 3 D set top box with HDMI. Image split top and bottom Even after doing all set up and screen mode select, still cannnot see 3 D Appreciate the guidance Thanks
Answer
2011-07-04 20:30
Kim
Pro Cameras:
I have the SR-HD1250. I imported hdd video to the hard drive (from my video camera)a few times and I have made a few very nice blu-ray discs (BDMV). I divided, deleted, and grouped some titles on the JVC HDD before I attempted to dub them to bd-r. When I attempted (5 times) to dub to BD-R in BDMV, it appears to be dubbing, but at 3% it stops dubbing and says dubbing is complete, but there is no titles on the disc. Can I edit titles before dubbing to BD-R in BDMV? I am using the same media I used to burn five others successfully (Sony bd-r). I would appreciate any direction you can give me as I have wasted several discs. Thanks
Answer
2011-07-05 02:07
Bill McCarthy
Pro Cameras:
Just purchased a 700 Absolutley love it Re the remote I cover orchestral concerts in New Zealand and need to be far away from the cameras How far does the remote cable go
Answer
2011-07-05 05:36
Peter J. Fusco
Combo Decks:
Product: JVC SR-DVM600 deck How do I dub three separate video clips from the hard drive to one DVD?
Answer
2011-07-05 19:29
Paul
GY-HM700/710/750/790:
What resolutions are output from the SDI port in HD mode? 1080p 24fps, 25fps, 30fps 50fps, 60 fps? 720p 24fps, 25fps, 30fps 50fps, 60 fps?
Answer
2011-07-06 11:22
Brandon
GY-HD200/250U:
What are the steps for receiving Return Video on the camera? Is there an internal setting or simple cable connection between CCU and switcher. thanks,
Answer
2011-07-07 09:49
doug
D-ILA Projectors:
I just replaced a lamp in a customers home. Now the JVC RS15 blinks the lamp light 3 times followed by a pause. The projector will not turn on with the new or old lamp installed. Please advise.
Answer
2011-07-07 20:04
Sebastien
Pro Cameras:
GY-HM100: I am trying to connect two wireless microphones but the camera doesn't recognize them. It keeps the built-in microphone. I followed all the steps: connected the mics in the XLRs inputs, turned on the microphones (that are working normally) and nothing. Can you help me?
Answer
2011-07-08 14:07
John E Kohler
Blu-ray Recorders:
What file format(s) is the 1500 looking for on a SDHC card? Folder structure, etc.?
Answer
2011-07-17 01:13
Sjoerd Tolsma
Projectors in general:
Dear Sir, I have a problem with RS15 projector. I use a PC connected to the projector with HDMI. When I set the PC to 1080 24p or 1080 23P the projector is intermittently showing black screen. What happens is that the projector is showing the picture correctly but randomly the screen suddenly turns black and then immediately afterwards returns to the picture again. I tried different HDMI cables to esnure it is not caused by the cable. As well I tried 2 video cards (ATI and nvidia) but with both cards the issue happens. Can you please let me know what I can try to prevent this black screen. With the flashing black screen the 24p mode is useless. Regards Sjoerd Tolsma
Answer
2011-07-20 04:14
gaetan
Blu-ray Recorders:
Hi, I have a blu-ray disc & hdd recorder SR-HD1500. I want to know if it is possible to record a 24psf video program issued from a hdcam vtr on the hdd of my recoder and transfer it on blu-ray disc thanks a lot
Answer
2011-07-20 13:10
talalfram
D-ILA Projectors:
my DLA-RS1 projector make a loud noise and the warning light began to blink. how do i fix it??
Answer
2011-07-25 09:51
Wayne
D-ILA Projectors:
My RS1 image has a yellow color at the top that is easily seen especially in scenes that are nearly white. It extends about 2 - 3 inches from the top. The lamp and warning leds are off. Could this be a bulb problem or does the unit need to come in for repair?
Answer
2011-07-26 03:18
bernard martin
Blu-ray Recorders:
ref my sr-hd1250. the unit renames my files from 001 when i finalise them. the files are recorded direct from a sony HDV deck. I need to have ref numbers for each file.
Answer
2011-07-27 11:09
Araújo
Pro Cameras:
Hello, i own two jvc, one HM-700 and The other HM-100. In the 700 i had 8 dead pixels in the past 22 months and i was able to fix, but in the 100 i already had 2 in 14 monts and the only way to fix is going to the service shop. Is there any way to fix wih firmware like the 700? Are my cameras deffective? I´m afraid with the end of the warranty in the 100 i will not be able to shoot because service is very expensive. Every month i go to jvc pro website to check firmware upgrade but the last version is 2009. I Ask for when a new version with the pixel fix option in the 100. Please respond. Thank you.
Answer
2011-07-28 02:19
Ira - Audio Vision
Reference Series:
Hi, Can I extend the factory 3M cable of the PK-EM1 with additional Cat5 cabling? Or, is there a pre-made extension cable for the PK-EM1 available for purchase? Our current installation project will require about 75 feet of cable from the projector connector to the PK-EM1 location in the front of the room, due to room layout and conduit locations. A quick answer is appreciated. Thank you Ira Guthrie Owner, Audio Vision (310) 308-8655
Answer
2011-07-28 11:55
stuart lee
Pro Cameras:
on the model DLA models, which ones have an anamorphic setting on the scaler? I don't see it listed in the specs for the DLA-RS50U or DLAx7 and models above. Thank you Stuart Lee
Answer
2011-07-31 19:28
Mike Strauss
GY-HM700/710/750/790:
Do you offer an accessory to adjust the viewfinder on the 750? The ergonomics of the camera are not ideal. When I align my ear to the earpiece and center my shoulder on the brace, I cannot use the viewfinder.
Answer
2011-08-01 14:04
Jason
GY-HM150/100:
I would like to play the .mov files from my cam/card through Quicktime; however, it will not open or play. Is there something from JVC or another codex I need to make this happen. I do not have FPC installed currently.
Answer
2011-08-01 16:04
Richard Sydenham
Pro Cameras:
GY HD251 Audio Issues with SD SDI output to Avid MC and SDI Mojo the audio including test tone generated from the camera is distorted When captured via avid would this be an Avid compatibility issue? However having conducted tests it seems fine when monitoring straight from the camera, its only once it gets to the avid and the Mojo that the problem arises
Answer
2011-08-02 18:06
Niyi
GY-HM700/710/750/790:
I cant playback clips that i record on my GY-HM700 in Quicktime or vlc player or even import it into Adobe Premiere pro CS4 or CS5. i have tried to record with differnt formats i.e 1280*720(60phq,60psp,30phq,30psp,50phq,50psp,25phq) how do i solve this problem? i run windows 7 ultimate.
Answer
2011-08-04 05:28
Russ
Pro Cameras:
I hvae a problem with a persistent buzz in the audio. I have read the manual and know about the possibility of recording input terminal noise. But I cannot seem to get the settings right... or perhaps there is a mechanical issue. How should the audio switches be set for simply recording mic audio to input #1 and ambient to channel#2? than you..
Answer
2011-08-07 16:55
Bruno Garcia
Pro Cameras:
I would like to know if JVC can provide the codec/software from the HM-100 to be install in to HD7? I would like is to get free from TOD files and get MOV files recorded on HD7 camera for direct editing on FCP. In my ignorant point of view that wouldn't be so difficult to do. Thank you for your help.
Answer
2011-08-08 06:42
Al Evans
GY-HM700/710/750/790:
Is there a way to fix a bad pixel on a HM700 camera? 6zj6y2
Answer
2011-08-08 13:01
Tom Padovan
Combo Decks:
Client of mine has a Mac computer. He is trying to interface it to a JVC SR-DVM600U. He has advised me that it has trouble through the DV port interfacing. Any suggestions? Thank you in advance.
Answer
2011-08-09 22:21
BIGIndy
Pro Cameras:
Hi everyone, how you guys doin? I hope some of you can give me some answers regarding video quality in live webcasts. I'm going to do a 3 camera registration of a musical event which I want to live mix. This feed I'd like to broadcast live over broadband with. The question is: in order to broadcast with the HD quality we record in, what would be the best amount of bandwith for an optimal HD encoding? 1 Mbps or 4 Mbps? or more? Thanks in advance and have a nice day Greets BIGIndy
Answer
2011-08-11 08:45
Oscar Moreno
GY-HM150/100:
How do I set the date and time to be recorded with the clip?
Answer
2011-08-11 15:56
John Greenfield
Pro Cameras:
I have a GZHD7. Is there a remote that has more functions than the one included? The one that comes with it does not access the editing and file features.
Answer
2011-08-15 23:01
Robert Koch
Pro Cameras:
I have two white pixels on my HM700U how can I fix them?
Answer
2011-08-17 09:06
Donald Upham
Blu-ray Recorders:
Why am I not able to rename Discs when burning an SD DVD on my SR-HD1250U? It always is named JVC_BD_RECORDER and the files are always dated Thu, 1 January 2009? Why is there no pause to the hard drive recording without stopping and creating a separate file.
Answer
2011-08-17 19:57
Charles Lawson
GY-HD200/250U:
We bought the GY-HD250 cameras and two of them have dead pixels (one camera has two). Is there any way to fix these dead pixels in the image block? On the previous SD 16:19 JVC cameras we owned there was a pixel masking option you could do up to 5 times before replace the image block. I am very frustrated with JVC and dead pixel issues. Now we want to sell and upgrade these cameras but the dead pixel issue will make it very difficult to sell to anyone else without a solution. My phone number is 208.437.2610 I hope to hear from someone soon....
Answer
2011-08-18 14:07
Rubin Simon
D-ILA Projectors:
My dla-rs50 was repair Jvc replace the motherbroad and all factory setting are gone. What can I do to replace all setting
Answer
2011-08-18 17:54
Tim Young
Combo Decks:
Recently my combo deck has begun "crashing" when attempting to play dvds. It started locking up on dvd menus, then would go into the LOADING mode, then would work for awhile then crash again. Now it simply says "LOADING" and continues for hours. I've tried unplugging and plugging it again, which worked for awhile, but now nothing works. I love the unit and would like to keep it going if possible.
Answer
2011-08-27 13:37
Ray Buonanno
GY-HM700/710/750/790:
I have had a problem with the audio on my GY-HM700. Since purchasing it, there has been a faint, yet easily heard hum. This happens with any microphone I use. Is this something that can be addressed by the user or does the camera need to go in for service? Please advise.
Answer
2011-08-28 19:34
Arthur L. Diggs
Pro Cameras:
When will JVC produce consumer grade Blu-ray recorders?
Answer
2011-08-30 13:14
James (Jim) R. Sheppard
Reference Series:
On the DLA-RS60, how do I reset the left-right lens shift to zero (none)?
Answer
2011-09-01 01:26
afra dikasu
IP Security Products:
pleace i have problem with camera vn-c215v4u because this cameras are working and recording in NTSC signal and i need recording and working typ to be in PAL signal. can i change something in this cameras with DIP switch (if switch egsisting).
Answer
2011-09-01 13:52
Richard Le Master II
GY-HM150/100:
Sony is extremely good in low lighint situations... how is the GY HM100 and will it convert to Final cut express without codec help
Answer
2011-09-02 01:47
David Moldes
3D Monitor:
Hi there We've got a GD-463D10 from you guys that has been shipped out of our premises. We want to use it on 220v. We need to know its watt consumption in order to get the AC adapter, but I can't find it on your website. Can you please advise? Cheers, David
Answer
2011-09-03 18:04
Mark Gibson
Combo Decks:
How can I connect an sr-dvm700 to a Mac?
Answer
2011-09-07 14:27
Josh Hicks
GY-HM150/100:
I have the 32 Gb Class 6 sandisk SD drives. When I tape I get a consistent error message of "Video Management File is damaged, Recovery is required to record/ playback/ recover" I follow the steps to recover. The issue continues to happen after recording for a length of time. I have tried reformatting the disks with the camera. I have tried to download the files that I can watch on the camera but cannot get to view or download on a PC due to bad file areas. Brand new camera, brand new cards. Any ideas on what I need to do to make this work?
Answer
2011-09-13 20:07
Matt
GY-HD200/250U:
I recently bought a used JVC GY HD200U (B). My question is, When I try to capture footage shot in any HD formats into (Sony Vegas) it will shut the program down.. But if I shoot in DV mode it will load just fine?? Am I missing a Codec? Please help!!!
Answer
2011-09-13 20:32
Tony Kennedy
GY-HM150/100:
I have a brand new gy-hm100e and it is very slow to focus, moving from one focus point to anothor further away it can take about 5 to 10 sec to focus. Is this a set up fault or camera fault.
Answer
2011-09-15 15:43
Claiborne Clark
Pro Cameras:
With the GY HM100u, what is the minimum system requirement for editing, and what is the recommended minimum storage capacity? How do I weigh the difference between MAC (e.g. iMAC or MacBook Pro) and the less expensive PC editing approach. I find my old Power PC MAC and FCP 5.0.4 are useless with this great camera. But having been set back by the cost of the camera I am now hurting in my need for a new system and software to edit and burn disks. What's the best inexpensive way to wade in?
Answer
2011-09-16 03:45
CC
Pro Cameras:
Is an iMAC an adequate platform if I edit GY HM100u footage with iMovie or FCP? What would be minimum acceptable RAM & speed? And what would the requirements be in the PC world if I edit with Sony Vegas?
Answer
2011-09-16 09:48
Tim Stollery
Pro Cameras:
I am considering purchase of a used HD GY 200, 110, 250. I am still using Final Cut Express untl i am able to upgrade to macbook pro. 2 questions: what are major differences between 100, 110, and 200 and 250. I know the 200 is compatable w, FCE, is the 100, and 110, and 250? Thanks.
Answer
2011-09-20 02:09
William Cameron
Pro Cameras:
how do i upgrade my camera? I have download the upgrade off your website but i dont understand how exactly to transfer the upgrade to the camera please help
Answer
2011-09-21 17:42
Jim Fleser
Pro Cameras:
Bought a GY-HM100 and two Class 10 32GM SDHC cards. Looks like I need to upgrade the firmware; OK not the end of the world but I need to buy a Class 6 card to load the firmware upgrade on. OK, bought a 16GB Class 6 card (I didn't need it but good for back up perhaps) but I'm getting the same "Insufficient Space" error and tried formatting it via the 'Media Settings' screen but same problem. It says "Insufficient Space" HELP!!!
Answer
2011-09-23 19:04
Howie
GY-HM150/100:
Is there software available to reveal the date and time in playback? Is there a way in final cut? If not, is there hard ware that can be used to generate date and time stamp for playback? Thanks
Answer
2011-09-24 14:14
Matthew Mealer
Pro Cameras:
I am the video director at a church which currently uses three GY-DV550s and one GY-DV500 in a multi-camera setup. The church is now considering an upgrade to HD equipment. Ideally, we would like to be able to use as many of our existing accessories as possible -- 26-pin cables, RM-P210 CCUs, Fujinon kit lenses, etc. What would be an ideal replacement for our existing system that would minimize the need to purchase new accessories?
Answer
2011-09-25 06:28
raamraam
Pro Cameras:
what are the possibilities of getting best results using JVC HD PRO and to convert on motion film stock and what precautions if any are to be taken? what format gives the best results
Answer
2011-09-28 14:41
Todd McDonald
GY-HM700/710/750/790:
Is there any way to get .mov media to import into Final Cut Express 4.0 from the JVC HM700CHU? Will changing resolution or using a third party software solve the problem, or is the final cut pro upgrade the real solution?
Answer
2011-09-30 14:16
Tammy Albright
GY-HM700/710/750/790:
While shooting my focus looks perfect even when I hook to an outside monitor, however upon playback on my mac most images look fuzzy or distorted...what am I doing wrong?? Had camera a week and love it except for that!
Answer
2011-09-30 17:32
Anthony Nutter
Combo Decks:
Trying to record a DVD from a live input. The DVD records for 2 minutes and stops. Any reason for this?
Answer
2011-10-01 14:31
JVC SR-DVM600U model comptibility for eu
Combo Decks:
JVC SR-DVM600U-3-IN-1 MINI DV/HDD/DVD-R COMBO DECK-40GB HAND DRIVE. Is this system adaptable as PAL system? Can this model be used in the eu at 220v 50hs supply?
Answer
2011-10-03 14:41
Richard Botello
ProHD VTR:
ProHD BR-HD50 (Note does not say 50U) We had received new HP Z400 computers with Windows 7 64Bit. We have not been able to get the 1394 card to pickup the unit. It does not detect it at all. I added LSI and TI 1394 cards to the unit just in case. Still would not detect it. Put it back on the old XP unit still sees it. Is the device Windows 7 64Bit compatible.
Answer
2011-10-05 09:17
Robert Wadzuk
Projectors in general:
Do you produce a projector that can mount on a side wall and offset that far. Instead of ceiling mount. The ceiling that is planned is 20 feet tall but, the room is narrow. Say 15 feet wide and 30 feet long. Just checking. Don't want a 20 foot pole coming down from the ceiling.
Answer
2011-10-07 14:19
Daniel Klatzker
Blu-ray Recorders:
I have a HDD recorder - SR-HD1500US or SR-HD1250US. I am having problems taking a video recorded on the HDD and exporting / dubbing it on a DVD to load onto Final Cut Pro. Not sure what I'm doing wrong. How can I get the footage on my Mac so I can edit it.
Answer
2011-10-11 09:32
Rick Bagby
Blu-ray Recorders:
Is there a firmware update for the SR-HD1500US? We were using 4x Verbatim BR Discs. These have been discontinued so we went to the 6x and they give us an error.
Answer
2011-10-12 04:16
Richard
Combo Decks:
Can I set 16 x 9 aspect ratio instead of 4 x 3 when recording Mini DV on SR-DVM600U? Thanks a lot. Rich
Answer
2011-10-14 21:02
david ospina
GY-HM700/710/750/790:
hello, i have a problemt whit my camera display ,now is in black color. is posible rest the camera or is problnt dispaly, thank for your help.
Answer
2011-10-17 10:43
Dr.Mortada
Pro Cameras:
I have the dla hd100 and have started to loss the picture to a blue screen with the error msg the HDMI signal is out of range.
Answer
2011-10-21 19:39
Chuck
2D-3D Converter / Processor:
I guess finding useful, reliable information on the internet isn't hoeplses after all.
Answer
2011-10-22 07:50
Francis Concepcion
Pro Cameras:
I have a JVC-GY-HD250 camera and is no taking white balance,
Answer
2011-10-26 06:53
Jaime ALvarez
Pro Cameras:
Hello, my name is Jaime. I am working whith fcp 7.0.3, and i see a bad quality in the canvas. I think i have a problem with the fields. I see a little "jump" in the video. Can you help me? Thank you. Sorry, my ingles is very bad....
Answer
2011-10-28 07:17
Paul Kay
Pro Cameras:
Using the VR-N900U unit and recording in MPEG4, the video and audio are both very good but the Audio is out of synce (in front of) the video by approx. 1 to 2 sceonds. Could it be the MPEG4 format? Should I cahnge it to MPJEG?
Answer
2011-10-29 02:34
Serge from Dubai
GY-HM150/100:
I have a GY HM100E camera. I want to buy Cyberlink Video editing software because it's very simple and easy to use. I could not import the video files in Cyberlink version 8 Software. Can we import the video files in Cyberlink version 10?
Answer
2011-11-01 11:05
nwang
3D Monitor:
I was wondering if there were calibration documentation and/or software available for the JVC GB463D10U. I have found documentation and software for the GD-X1 series of monitors, could that software be used with the GD-463D10U? Thanks!
Answer
2011-11-02 21:55
James Burgess
Blu-ray Recorders:
JVC previewed a Blu-ray recorder that has a built-in HDSDI input and output at NAB 2011. This unit availability was given as late 2011. It is now November 2011. Any time frame on the Blu-ray recorder with built-in HDSDI input and output?
Answer
2011-11-03 06:29
Lou
Reference Series:
With regards to the DLA-RS45U, can you tell me more about the constant height option? In the past, it only made sense to buy a 2.35:1 screen if you were going to purchase an anamorphic lens, but now it sounds as though a 2.35:1 screen is a decent option when using this projector, which is welcomed in the world of bluray, where most movies are presented in this format. Also, will this stretch mode work with 3D content on a 2.35:1 screen without the anamorphic lens?
Answer
2011-11-03 09:51
Paul Fagan
GY-HD200/250U:
I'm editing footage from a JVC 250u in Final Cut Pro 7 on my MacBook Pro. It's my first project with footage from a JVC HD camera/drive. After days of trouble free editing, the files from the 250u suddenly stopped working. They are showing up in the FCP Browser as connected, but all I get is a white screen when I try to view them in the Viewer or the Canvas. On the timeline the thumbnail images are gray with just a "+." The footage resides on my Firewire drive (and on a back up drive) in a folder called "FCP_Example" in large QuickTime and small XML files of the same name. However, I cannot play the QuickTIme files with my QuickTIme player. When i try to reconnect the files nothing changes. Any suggestions? Paul
Answer
2011-11-04 09:57
William Gonzales
GY-HD110U:
where can i get the info for the form CAM: for the upgrade firmware Process. my example CAM:???? ARM:1.07 EEPROM:052
Answer
2011-11-05 19:55
Paul Fagan
GY-HD200/250U:
It's been suggested that I lost my codec. ------------- I'm editing footage from a JVC 250u in Final Cut Pro 7 on my MacBook Pro. It's my first project with footage from a JVC HD camera/drive. After days of trouble free editing, the files from the 250u suddenly stopped working. They are showing up in the FCP Browser as connected, but all I get is a white screen when I try to view them in the Viewer or the Canvas. On the timeline the thumbnail images are gray with just a "+." The footage resides on my Firewire drive (and on a back up drive) in a folder called "FCP_Example" in large QuickTime and small XML files of the same name. However, I cannot play the QuickTIme files with my QuickTIme player. When i try to reconnect the files nothing changes. Any suggestions? Paul
Answer
2011-11-06 06:09
Anthony Musiello
GY-HM150/100:
Hi I was wondering if this camera would import into after effects.
Answer
2011-11-08 09:30
Clicerio Munoz
Combo Decks:
I FILLED all the spaces needed a few moments ago, even the characters below and I am not sure my question was received
Answer
2011-11-08 09:35
Clicerio Munoz
Combo Decks:
My DVM700U Is connected to a TRICASTER STUDIO by Fire Wire. I can't get audio mastered on tape from TRICASTER's NLE to the combo. How can I fix this? (I tested capturing VIDEO plus AUDIO from the combo to TRICASTER and It was OK; Already reset the combo and checked not to have the HDD/DVD inputs switched to DV)
Answer
2011-11-11 11:34
sandro
GY-HD200/250U:
GY HD201 Hi, I wonder how to get read of dead pixel? many thanks Sandro
Answer
2011-11-14 14:42
Andy Opel
3D Monitor:
Is there a firmware update for the GD-463D1? I spent almost $5K on this and it does not even display bluray 3D content. Please let me know where to access the update. Thank you, Andy Previous Q in JVC Forum: My GD-463D10 is not recognized as a 3D monitor. When I connect a 3D Blu-ray player or a Playstation-3 with a 1.4 HDMI cable the monitor is not seen as a 3D device. Is there a (hidden) switch somewhere? Thanks The GD-463D10 is not compatible with HDMI 1.4a. (It was designed prior to the establishment of this standard.) If you feed a side-by-side signal to the monitor with an HDMI 1.3 connection, it should work.
Answer
2011-11-16 19:19
hnsome
D-ILA Projectors:
why SH4K projector can not support 2560*1600 definition signal? I think it is DVI-D dual link standard. And how to implement 12bit color depth signal input to DVI-D terminal? AMD and NVIDIA graphics card only have 8bit and 10bit supply.
Answer
2011-11-21 14:24
Adam Shor
Blu-ray Recorders:
We have a JVC SR-hd1500us which we use to record City council meetings from our TV production system. I am able to burn blu-ray discs, but I need to be able to distribute them as DVDs to the public as requested. So far, I am unable to burn on a DVD in the device itself. I am also unable to use any Blu-Ray ripping software (DVD Fab, Xilisoft, etc) to rip these Blu-Ray discs at all. I keep getting a "disc encrypted error." Is there a setting on the sr-hd1500us device that will take out the encryption so I can turn Blu-Rays into DVDs on my PC? Or, is there a way to burn DVDs directly from the sr-hd1500us? Please help!
Answer
2011-11-21 14:43
Arthur L. Diggs
Blu-ray Recorders:
Can I import from DVD+R DL to the HDD on the SR-HD1250s or SR-HD1500s Blu-ray Disc HDD recorder?
Answer
2011-11-22 01:20
Bruce Richards
Combo Decks:
About SR_DVM70 - not used much because has habit of freezing - no buttons work except the operate button - it is not in "Mode Lock" - usually in hdd mode. Just want to get it into dv mode.
Answer
2011-11-26 17:58
Arthur L. Diggs
Pro Cameras:
Can I import videos from DVD+R DL to the HDD
Answer
2011-11-27 07:55
Daniele Iop
Flat Panel Monitors:
I own a monitor JVC model: DT-V24L1D, this monitor, reading the manual, support trough sdi the 1080 25p signal. So why when I connect a source 1080 25p to the monitor, the monitor indicate 1080 50i instead of 1080 25p? I have tried with 720 50p and 720 25p and it work but it doesn't with 1080 25p, I have also tried to connect different kind of signal, from gopro or Grass Valley Storm 3g but with no luck... Thanks in advance per any help
Answer
2011-11-28 09:54
Arthur L. Diggs
Pro Cameras:
Can I import videos from a DVD+R DL to the HDD of SR-HD1250 or SR-HD1500
Answer
2011-11-28 15:07
Harvey Weiss
Reference Series:
I am replacing a JVC RS-2 projector with a RS-65. I currently have an HDMI 3 cable connected to the projector from my DVDO Edge video switcher/scaler. Assuming the bandwidth on this cable is wide enough, will I be able to use it for 3D content or is there something in the RS-65 design that REQUIRES HDMI 1.4 in order to view 3D.
Answer
2011-11-29 09:41
Alan Tam
Blu-ray Recorders:
I have a SR-HD1500AG recorder. Can It directly records the video to a DVD+R/RW disc instead of a bluray disc?
Answer
2011-11-29 11:30
Derek
Blu-ray Recorders:
On the SR-HD1500US, what is the serial command that corresponds to the option, page prev, and page next buttons on the remote. I looked at the manual and tried all the codes and none worked.
Answer
2011-11-29 11:49
Arthur L. Diggs
Pro Cameras:
Can I import videos from DVD+R DL to the HDD on the SR-HD1250 or SR-HD1500?
Answer
2011-11-30 15:52
Frank Vinciguerra
GY-HD200/250U:
What is the difference between the GY-HD200 and the GY-HD250 cameras?
Answer
2011-11-30 15:57
Frank Vinciguerra
GY-HD200/250U:
Can the GY-HD 200 or GY-HD250 cameras record 1080 video onto a Focus Firestore or is the only hard drive system these camera can record onto the JVC DR-HD100 firestore?
Answer
2011-12-02 04:32
Pedro Fonseca
ProHD VTR:
I have a BR-HD50, always worked fine but sudently I couldn´t import to tape my projects in FCP (Apple), the recorder does not accept "input select" from the computer (via firewire), but if conected (with the same cable) to a camera it works. It allows me to capture tape without any problem. Technicians didn´t fix the problem, insted they made an upgrade to the latest version. Obviaslly it didn´t worked. "13 94" keeps blinking ocasianaly. Can you help me?
Answer
2011-12-02 04:32
Pedro Fonseca
ProHD VTR:
I have a BR-HD50, always worked fine but sudently I couldn´t import to tape my projects in FCP (Apple), the recorder does not accept "input select" from the computer (via firewire), but if conected (with the same cable) to a camera it works. It allows me to capture tape without any problem. Technicians didn´t fix the problem, insted they made an upgrade to the latest version. Obviaslly it didn´t worked. "13 94" keeps blinking ocasianaly. Can you help me?
Answer
2011-12-02 21:50
Chris
GY-HM150/100:
Is it possible to adjust the zoom speed on the GY-HM100? Based on experience with previous video cameras, the zoom rocker is rather slow to zoom in/out. Can the zoom be custom set to different speeds?
Answer
2011-12-04 00:19
Kahlil
Pro Cameras:
If you use your SD card in a mac does this make the card unusable in the GY HD100? My 16gb SD card was working, but after using my macs card reader, the camera displays that there is zero space on the card. I've double checked the card and it has no media on it. How can I get the camera to read the card correctly? Thanks.
Answer
2011-12-05 14:38
Arthur L. Diggs
Pro Cameras:
Can I import videos from DVD+R DL to the unit's HDD?
Answer
2011-12-06 19:26
Beth
GY-HM700/710/750/790:
Pro HD 750 is it possible to record in HD format to sdhc card and output a sd signal via firewire at the same time to a computer to stream the SD via software? If so how would that be done?
Answer
2011-12-08 11:04
Fred Johnson
Blu-ray Recorders:
What are the record times for Composit video on 1250 & 1500?
Answer
2011-12-09 09:23
Richard Gregory
Pro Cameras:
I have GY-HD100E which I am trying to connect to my laptop so that I can record using on location software. So far it can only connect in 16:9 and I want to record 4:3 SD format. Any ideas?
Answer
2011-12-13 23:29
pbahn
GY-HD110U:
Is it possible to record to both card slots simultaneously to have a back up file of shots.
Answer
2011-12-14 13:09
Ken Robertson
Pro Cameras:
Can use this like a DVR? Begin recording a signal and play it back while it's recording? If so what are the controls like? Are they on the display?
Answer
2011-12-15 11:17
Malaka Chandradasa
D-ILA Projectors:
What is the difference between these two projectors? DLA-X70R/DLA-RS55 Both are priced the same so why should I buy one over the other?
Answer
2011-12-18 19:42
Paul Johnson
GY-HM700/710/750/790:
Can I stream to the internet through the firewire output on my GY-HM700, and still record 1280x720p 60i to SDHC chips? If so, how do I configure the camera and hook up? Thanks much, PJ
Answer
2011-12-22 20:05
Haidar Rahamut
GY-HM150/100:
How can I get to record with a Apple Pro Res Codec on my HY-HM100U?
Answer
2011-12-25 11:10
Dan Scarboro
2D-3D Converter / Processor:
I have a DLA-RS35U projector. What are my options for 3D? Is there a converter/processor that can be placed inline so that my PlayStation 3 will recognize it?
Answer
2011-12-26 11:31
Alan Chen
Pro Cameras:
I just bought your sr-hd1250us recorder. In playback of a letterbox movie, I see gray borders top and bottom. Is their any way to have those black or dark gray (it only allows blue borders in the menu). Thanks, Alan
Answer
2011-12-27 03:21
Martin Hanson
GY-HM700/710/750/790:
We just got two hm700u cameras. we are using anton bauer hytron 50 batteries. that is not the batterie reccomended in the manual, but i see no reason why they should not work as the power output is the same. but we are low battery symbols with the batteries even though they are charged. do we need to replace all our batteries to use these cameras?
Answer
2011-12-27 21:31
Max Donati
Blu-ray Recorders:
Hi, I have a JVC SR-HD1500US and would like to know if there is a firmware update for it. I have a Sony avchd NX camera and I have trouble to transfer the files to the hard drive and burn in to blu-ray. I also have problems using the duplicating feature. It will only make 2 or 3 copies and quits. I am hoping that a firmware update is available to fix the problems, Thanks. Max
Answer
2011-12-28 09:22
V Shankar
Pro Cameras:
I am replacing an RS2 with an RS65. One of my sources is a composite video which I have connected to the composite video input of the RS2. However it seems the RS65 does not have a composite input. My source has only the composite out available. What do you suggest I do.
Answer
2011-12-30 13:27
colin furnival
GY-HM700/710/750/790:
recording multiple images and diffrent times of night or day , powering the camera on and off . why cannot i not see all the files with the card in pc , but they all show on camera
Answer
2012-01-02 23:10
doug
GY-HM700/710/750/790:
I own a hm700. When I record in 24p I get really terrible stuttering in the shot when I pan or zoom. Is there a way of eliminating this? here is a sample on vimeo: http://vimeo.com/34493987
Answer
2012-01-03 18:07
Jason Piazza
Blu-ray Recorders:
Is there a firmware update for the SR-HD1500US?
Answer
2012-01-04 13:40
Doug
Pro Cameras:
I have a pixel problem with my JVC HD100 and when I access the advanced menu i just jump over the Pixel Comp selection. how can i get it to turn on so I can hopefully fix the pixels that are stayinh white? Please Help
Answer
2012-01-04 22:16
Tim McCrory
Combo Decks:
I use the JVC SR-DVM700U combo deck to dub from the HD to DVD-R disks. I have been using Verbatim DVD-R x16 disks for dubbing with no problems. But now I keep getting the error message "can not dub with disk". Later, I found a blank x8 DVD-R and it worked. What could be causing this problem.
Answer
2012-01-10 12:10
Mark Speer
Pro Cameras:
Hi, I cannot get our JVC GY HD250 to talk to Adobe Premiere when trying to digitize. It ill perform one command, and then says connectyion lost. - HELP!
Answer
2012-01-12 08:31
Scarlet Mason
Pro Cameras:
What replaced the JVC GL-V0746USP lens?
Answer
2012-01-18 12:05
John Carpenter
GY-HM700/710/750/790:
What do the yellow squares in the audio level meter indicate. Black squares are to what level and when start the yellow square and what level the second yellow square??
Answer
2012-01-19 20:06
Frank Marott
Combo Decks:
We use a SR-MV50U and SR-DVM700U in our photography oriented business. Both machines have developed the exact same problem. Symptoms are: - Cannot turn power off. - Cannot load a DVD, as eject does not function. - tape deck functions, but no video or audio is output. - "LOADING" continuously blinking on display. Tried reset with STOP/PLAY buttons, no effect. Any thoughts on a fix?
Answer
2012-01-20 13:59
Kevin Whaley
Blu-ray Recorders:
Is it possible to record direct to the Sd card using the video inputs? SR-HD1250US
Answer
2012-01-21 13:27
Dan Anderson
Reference Series:
how many Lumen are in teh various NEW models you offer, I am between the RS4800 and RS55. Can you tell me the major differences so I can determine which is best as well as pricing. Thanks
Answer
2012-01-23 14:46
joe
Reference Series:
i need the hex codes for the 3d settings ( side by side, top bottom ect.) for the dla-rs40. can you please send them to me thanks joe
Answer
2012-01-25 01:22
Reinhard Schretzmayer
GY-HM150/100:
Hi, I had a hot pixel problem with my HM-100 - it was repared at a JVC servicecenter, but I was no longer happy with this cam. So I changed to a HM-150. I know, the HM-150 has a built-in pixel compensation tool - unfortunately hidden in the service menu :-(. In general I use my camera on round trips in foreign countries - our next destination will be China. Therefore it would be extremly necessary, that in case of appearance of a new hot pixel I am able to solve this problem on my own (far from home). Please give me a hint, how I can get into the service menu to the pixel compensation - many thanks. I promise, that I will not tell this to anybody ;-). Thanks a lot. Reinhard Schretzmayer //Austria
Answer
2012-01-27 16:44
Desiree
Pro Cameras:
Can I monitor images in the Shooting mode on my GY HM100U from my computer screen?
Answer
2012-01-29 01:25
krishna murthy H.K
2D-3D Converter / Processor:
how we can record output from (3-D IMAGE PROCESSOR) IF-2D3D1 for broadcast quality content, which reader or recorder supports
Answer
2012-01-30 18:56
Roy
Combo Decks:
Trying to transfer VHS to DMV-700 hard drive (in XP record mode), video is fine no audio. It transfers to mini DV alright.And VHS to dvd video is fine no audio. I am sure what I am doing wrong, please help.
Answer
2012-01-31 13:04
Jordi izquierdo olivé
GY-HM150/100:
How can I use my JVC GY-HM100 as a webcam ? For that, I need to connect the camera live with my Pc. Is there any driver that makes the JVC GY HM100 be able to directly connect with Quicktime Broadcaster, Skype, Premiere, Magix video Deluxe etc.?
Answer
2012-02-04 09:35
Evan
Reference Series:
I know that there is the X70R and the RS55, but what is the difference between the two? If they cost the same, what is the advantage of one or the other?
Answer
2012-02-06 06:52
George Glozar
Pro Cameras:
We have got three camcorders: JVC GY-HD100, JVC GY-HD111E and new JVC GY-HM750E. We need synchronize two camcorders via IEEE1394 to recording at the same time. With GY-HD100 and GY-HD111E is ok, but we need do it with GY-HD111E and GY-HM750E and it is not working. All settings are doing, both camcorders are set to synchronize mode, same recording mode (DV, 50i) and GY-HM750E is master. Problem is that connection is created and camcorders recording synchronously but only unreliable. Some starts (3 or 4) and stops are ok, but then 2nd camcorder can not be stopped or started by master camcorder.
Answer
2012-02-06 16:51
Craig DiSesa
Reference Series:
I have an error code not mentioned in the manual. The three lights on the front of the projector show a solid red light (stand-by) - blinking orange (single blink) and solid red (warning). The lamp has less than 1000 hours and the lens cover is stuck open. I have tried several times to unplug it to reset it. When I turn it back on, I get the green light for about 1 minute and then it goes back to the code described above. I have cleaned the filter which wasn't very dirty. Please let me know what the problem is and how to fix it. Any help would be greatly appreciated.
Answer
2012-02-06 17:21
Sara McKenna
Pro Cameras:
How do I attach an external mic to the JVC GY HM100U? Once I unplug the shotgun mic I do not get any sound even though I have plugged in an external mic.
Answer
2012-02-06 19:55
Robert Koch
Blu-ray Recorders:
When dubbibg from SDHC to HDD on the SR-HD1500 I can not dub more than 1 32GB card why? the unit has a 500GB HDD well it's suppose to.
Answer
2012-02-06 20:00
Robert Koch
Blu-ray Recorders:
I own a SR-HD1500 unit how do I check the Hard Drive to ensure it's 500GB and how can I check to see how much space is still available?
Answer
2012-02-07 11:36
Forrest WIlder
Blu-ray Recorders:
I have the SRHD1250. Why am I not able to use high speed dubbing to burn disc?
Answer
2012-02-08 08:31
Mark
GY-HM700/710/750/790:
When i connect the GY-HM750 to my pc and i want to select seperate recordings it apears that each take is safed into a new directory foulder. Is it possible that when i make multiple recordings that they get safed in one same directory.
Answer
2012-02-09 08:39
Chris Gomersall
Pro Cameras:
Re: the GY-HM75)U. How do I remove the optical viewfinder (NOT the LCD flip out). I can unplug it but find no switch to release it from it's slider.
Answer
2012-02-09 11:41
Bryan
Reference Series:
Im looking to purchase the JVC RS55/X70 projector. Im looking at the Black Dianond Zero Edge 144" 2.35:1 screen with 1.4 gain. I cannot find anyone that has this setup in a display room. This will be a theater room with controlled lighting. Can you tell me if this screen is to big for the projector? If so what is the largest recommended screen for this projector? V/R Bryan
Answer
2012-02-09 12:25
Peter Berman
GY-HM700/710/750/790:
I can't get a video signal out of the SD connector. Can I take live video out of the GY HM 700U? I need an analog signal to record on a Panasonic DVC Pro Deck.
Answer
2012-02-13 10:25
Francisco
GY-HM700/710/750/790:
How do i fix a death pixel on my Jvc Hm 750U????
Answer
2012-02-16 03:40
richard mattock
GY-HM700/710/750/790:
Video from my jvc750 looks great in the day light, but under disco lights colours look very flat, disco light on people looks like it is panted on. my Video camera is set to 720p
Answer
2012-02-16 15:15
sean
Reference Series:
I'm interested in getting a JVC, likely the DLA-RS60U 3D. We're going to mount it to the ceiling and are looking at mounts. Are there three or four mounting screws to these JVC projectors? Thanks
Answer
2012-02-18 09:23
Chronos Communications
GY-HD200/250U:
Can I record to a standard HDD via the Firewire connection via VTR playback mode or only when the camera is recording "live"? If so, it there a specific setting in the setup menu to enable this or will it load to the HDD automatically?
Answer
2012-02-18 16:10
Michael Hulsey
Pro Cameras:
I have a gy-hm100u. Is there a conversion of some sort to know what ISO the camera is using...I'm trying to utilize a light meter and every one I examine asks for ISO in determining exposure. Thanks
Answer
2012-02-20 13:32
Justin
GY-HM700/710/750/790:
I have the GY-HM790 with the RM-HP250 CCU and I need to know if there are some additional settings needed to get these two items to talk to each other. The CCU stays on initializing and does power the camera but that is all.
Answer
2012-02-22 05:20
Clin Burley
Pro Cameras:
Have a GY HM-700E recently bought two Sandisk 32gig SDHC UHS-1 recorded fine in full HD but will not function in the USB mode when camera is plugged into the computer, worked fine on standard class 10 cards. Please Advise! Clin Burley (G M Productions) 01384 832187
Answer
2012-02-24 19:15
ALEX
Blu-ray Recorders:
JVC SR-HD1250US Blu-Ray Disc and HDD Recorder Dubbing from HDD to blu-ray starts and at 4-5% stops saying it is completed when in reality is not and disc is lost this way (bad disk if you want to check the contents). Is this a malfunction?
Answer
2012-02-29 12:05
Chris Jones
GY-HM700/710/750/790:
Hi, we have JVC HM700U which we shoot on to supply footage to outside editors. We keep hitting issues when they're using FinalCut Pro however - they seem unable to import the files. We are filming 1080/30p, HQ, and in the QT MOV format we understood to be compatible with FCP specifically. We transfer the directory structure off of SD card to a portable HD, then give this to the editor who us then unable to import the files (recently one told us an error message specifically mentioned something about file structure). I'm guessing there is something in our workflow that is causing the problem, but it's rather frustrating as we thought files could just be dragged & dropped into FCP.
Answer
2012-03-04 13:32
Jon LeBlanc
Combo Decks:
JVC SR-DVM600 will not recognize blank discs. It will play recorded discs. Is there a particular brand / type disc that has been tested to work in this machine?
Answer
2012-03-06 18:31
zen
Pro Cameras:
How many hours of video can be fitted onto a 32GB SDHC when using a ProHD camera?
Answer
2012-03-07 17:27
prit
GY-HD200/250U:
does gy-hd201eb has sdi output,can i connect it to ninja or samurai...or any other cheap recorder with high quality output ?using for movie production so which external recorder jvc reccomenends ?
Answer
2012-03-10 12:15
Tim Whaley
Pro Cameras:
I cannot get HD-SDI to output from the HD-SDI BNC connector on the camera. I can get SD-SDI to output from he the same connection. I am switching between SD & HD in the menu.
Answer
2012-03-12 14:30
Pedro Diaz
Blu-ray Recorders:
How long it takes to burn, say, 2-3 hours of video to a DVD-R disk?
Answer
2012-03-12 16:28
pam
Pro Cameras:
test
Answer
2012-03-14 07:06
dan caccamo
Blu-ray Recorders:
I am using a Crestron TouchPanel to operate 7 SR-HD1500US DVRs. The Option button and backspace or arrow right button and a few others are not listed in the RS-232 Command list. What are these commands in hex or ascii?
Answer
2012-03-14 14:43
Nate Compton
GY-HM700/710/750/790:
I use the GY-HM700U to shoot classified material. Security wants me to get info from JVC indicating that the camera itself cannot retain memory, only the SD card. And when I remove the card, the camera is now "Unclassified". Can someone help me with this??
Answer
2012-03-14 16:36
Hugh Chatfield
GY-HM150/100:
Somehow I have the camera in a state where if I press the AE button, I see a flashing AE on the screen - but I cannot get the +-N to show so I can adjust the exposure. I am on manual - and it used to work - so I'm thinking this is beacsue something else is set - but I can't figure out what. Suggestions?
Answer
2012-03-15 21:26
Rod
Pro Cameras:
I have a GY-HD251 that failed the firmware upgrade. I have tried the forcd update method but nothing happens. It seems as thought there is no power to the camera, although I can hear the fan spinning when power is applied. Should there be some indication that the forced upgrade is actually doing anything? Should one of the LEDs flash or something? Any suggestions or help would be greatly appreciated. Thanks, Rod.
Answer
2012-03-16 23:46
Jack Rocheld
Pro Cameras:
I have a 92" wide Dalite Cinema screen will a non gray screen work with the DLA-RS65U and what would the throw distance be for the 92" wide screen min and max distance be?
Answer
2012-03-16 23:50
Jack Rocheld
Reference Series:
what would the idea distance throw distance be for a DLA-RS65U with a 92" wide screen? Thank you
Answer
2012-04-02 11:53
Daniel Jørgensen
Pro Cameras:
Is it possible to get a breakout cable to the studio connector on a JVC GY-HM790E Thanks in advance! /Daniel
Answer
2012-04-03 11:40
Tom Myers
Combo Decks:
Our JVC SR-MV45U will not turn on. "LOADING" blinks in the window and the OFF/ON switch does not turn the unit off. Turning off the power to the unit does not fix the problem. Turning power on to the unit only brings the "LOADING" blinking message. How do I get this work? Our other SR-MV45U works fine.
Answer
2012-04-04 08:41
JD
Blu-ray Recorders:
Does the SR-HD1500US or SR-HD2500US support NTSC 608 (Line 21) Closed Captions for SD when recording live video to the hard drive? When burned to DVD or Blu Ray do the captions stay in tact? When we transition to HD, are 708 captions supported when capturing live video in the same scenario as above? Lastly do either 608/708 captions stay in tact if we burn a Blu Ray or DVD using a file source(as opposed to live feed) that is encoded with captions?
Answer
2012-04-10 02:42
david fratty
GY-HD200/250U:
hey i have the gy-hd201 my problem is that i can't dubbing (captur in primier) in my computer if i shot on hd . actually the computer don't recognize the video cam. do i need to do somthing ? thanks a lot david
Answer
2012-04-17 12:30
Robin
Reference Series:
i am purchasing a dla - rs65 projector. what is the best screenfor this. I have a 10 year old screen and the question is whether it should be replaced
Answer
2012-04-23 08:28
Michael Brassert
GY-HM700/710/750/790:
I just had a full 3.7GB go bad in the middle of a VERY important news event. In the middle of the shoot I got an INVALID MEDIA.... message and recording ceased. The file will not open. Is this a bad card (I have been recording to it for over a year.) Is it a camera problem? Can I fix the file? I must be able to have reliable recording. I have been using Transcend cards for 2 years without a problem. Should I use a different media card? Thanks, Michael
Answer
2012-04-24 17:05
Bob Moraw
Reference Series:
My DLA-RS60 is not allowing me to setup AV receiver Onkyo TX-NR5008 on screen. What is the problem?
Answer
2012-04-25 12:49
Don Horst
Pro Cameras:
How can I impot files made on a GY-HD100s in to Adobe Premier CS4? Thank You Creative Arts Technical Services LLC. Don Horst
Answer
2012-04-26 06:10
Halison Casimiro
Blu-ray Recorders:
G´day all! I´m looking for the SR-HD1500 firmware to download. I the technical manual they say to download the boot disk update firmware from SMIS in JS-NET and I have no idea where it is. I appreciate some help. Halison
Answer
2012-04-26 07:46
Jonathan Le Targat
GY-HM150/100:
Hi, i've just brought a GY-HM150E and i allready have a dead pixel on the image. So can you tell me how to resolve this problem. Thanks.
Answer
2012-04-29 08:34
David Weatherbie
GY-HM150/100:
I have the GY-HM100 and cannot get a clean (without any info display) signal out of the HDMI port for external recording. Is there a setting that I am not aware of to produce an image only output?
Answer
2012-05-01 08:48
Jeff Rosenbaum
GY-HM150/100:
How can I setup the GY-HM100U to easily output files for standard iMovie? I want to avoid any translations and directly import it.
Answer
2012-05-08 01:57
Marios Pashias
Reference Series:
Hi I have recently bought the JVC DILA-RS45 3D and I have some problems viewing correctly the subtitles when the movie is in 3D format. Specifically when I turned the video to 3D format subtiltes are splitted on the left and right side of the monitor. Please help me to fix this error. Thank you
Answer
2012-05-09 23:28
Kor Chuan Wong
Reference Series:
Is the throw ratio calculator also apply to projector with anamorphic lens on a 2.40:1 screen?
Answer
2012-05-10 18:39
Elaine Nelson
Blu-ray Recorders:
I cannot do high speed dubbing from the hdd to a dvd-r disc. It tells me "some titles cannot be dubbed". What does that mean? When first purchased, was able to do high-speed dubbing. Now it only dubs in real-time. What must I do to be able to do high-speed dubbing? I have a blue ray disc & hdd recorder model#SR HD1250US
Answer
2012-05-18 09:49
Jack Tankersley
Blu-ray Recorders:
I own the HD1250US. After importing data I edit by deleting unwanted scenes then rename each chapter. After I dub multiple cahpters from HDD to BD it plays back fine. However when Menu area is displyed with thumbnail it has a message stating: Unsupported Language instead of the new name I gave it earlier. The date it was dubbed appears but no other identification.
Answer
2012-05-21 06:54
steve ronay
GY-HM700/710/750/790:
We have a GYHM750CHE camera shooting MP4 format. How do we get the footage in to Avid Media Composer 5.5.3?
Answer
2012-05-22 15:56
dewayne_coats
Blu-ray Recorders:
I recorded a DVD+RW disc to HDD. It records in BD mode. I can not make copies to DVD-R. What's wrong? How do I record from the HDD to standard defination DVD?
Answer
2012-05-23 05:36
Shamimul Hasan
Reference Series:
Is 4K e-shift relevant on mediocre screen size say 120 inches diagonal and substantial viewing distance say twice the screen width? I understand that it is rewarding on very large screens and with short viewing distance. Plz elaborate.
Answer
2012-05-27 02:39
Ben Hoover
GY-HM150/100:
I have been doing videography for many years and am looking to start a business in town. I am getting ready to buy a GY-HM150U. I have some questions regarding the compatibility between accessories for the JVC GY-HM100U and the GY-HM150U itself. Is the JVC BN-VF823 Lithium-Ion Battery Pack - 7.2V, 2190mAh (non-Data) compatible with the JVC GY-HM150U and the included charger? Also, is the Hard Shipping Case for the GY-HM100U compatible with the GY-HM150U?
Answer
2012-05-28 13:23
Larry Reid
Pro Cameras:
Hello. While shooting a wedding with my JVC HM700, the battery failed while I was still recording. Upon restart, the SD Card (Transcend, which I have used several times before on this camera) with most of the footage says "incorrect media". I cannot access the files on the card through the camera or my Mac. How can I retrieve these files? Thanks!
Answer
2012-05-29 00:26
Flavio Quagli
IP Security Products:
I have a dome VNC655U I would like to know the URL for the stream JPEG without using Java or ActiveX thanks
Answer
2012-05-29 12:15
David Cooper
Combo Decks:
I have since determined what is causing this problem and have worked around it and have had no further disruptions while recording. The camera should be powered up first and connected via "Firewire" or analog input before turning on the JVC Combo Deck. It doesn't matter whether the camera or combo deck starts recording first but the camera MUST remain in the Camera Mode. If you switch to "Play" mode to view a tape on the camera and then eventually switch it back to "Camera" mode, this will cause the JVC Combo Unti to evenutally Stop recording. It may happen at anytime during your next recording run. Not sure why this happens but you will notice (if you are looking at the output of the JVC Combo Unit) the picture may jump a little then go blank while the words "No Input" appear breifly followed by "Loading" begin to flash. The work around this is to just leave the Camera in "Camera" mode and not switch to "Play" Mode. Using a machine to do something that is not exactly what the manufacturers intended it to be used for won't have any troubleshooting techniques in the manual. Hope this helps someone else as this caused me great hardship and botched recordings.
Answer
2012-05-29 12:33
James Smith
GY-HM150/100:
Hello, I would like to use the GY-HM100 as a makeshift studio camera for a live daily broadcast at my high school. We work only in 4:3 SD and our switcher is analog. Therefore, we need to output from the composite jack. This works, but when I set the output to 4:3 in the menu the picture is not letterboxed (as I would like it to be) but is anamorphic -- ie. horizontally compressed so that people look tall and skinny. (Playback of recorded clips are letterboxed, however.) Is there any way I can get the camera to output a 4:3 letterboxed image when using it it "live"? Thank you, James
Answer
2012-05-30 03:27
Frans Bromet
GY-HM700/710/750/790:
My camera doesn't start up anymore. Can you help me to find a fuse somewhere on the camera?
Answer
2012-05-30 10:52
Joel
Blu-ray Recorders:
Will the SR-HD1250US recognize and burn onto a Blu-ray disk the HD videos recorded onto an SDHC card by a Canon Vixia Camcorder?
Answer
2012-05-30 17:18
Matt
Blu-ray Recorders:
I have a 4hr Standard def video recorded onto the hard drive and I am trying to burn it onto a 25GB Blu-Ray disc and it says that there is not enough room on the disc to burn it. Do I need to break this up into chapters? I know 4hrs of SD video doesn't take up 25GB of space. please advise. -Matt
Answer
2012-06-01 11:22
Harry
Reference Series:
On the screen I can see brightness is pulsing, especially while displaying a white test pattern at around 25 ... 60% stimulus. That pulsing is only in high lamp mode perceivable, the frequency is around 1 ... 2hz. What is this? Is it a FW problem or maybe a malfunction? (RS55/X70)
Answer
2012-06-04 15:46
Ben
ProHD VTR:
Hi I have the BR-HD50 deck and for the life of me can not get my computer to even see it throught the firewire connecton. I have followed all the instructions, double checked all the deck settings and have connected other firewire devices to the computer to make sure it's not the computer port that isn't working. I am running Windows 7 Ultimate 64bit. I have also tried connecting it through my laptop which is running XP Pro 32bit, also with out so much as a blip or recognizing that a cable was plugged in. Is there a magic solution? Am I missing something in the directions? Before I spend a ton of money to send it in and make sure the firewire port IS in fact working on the deck is there ANYTHING else I should try? From what I have figured out the computer doesnt even recognize that the firewire cable was plugged in much less try to install it using the correct driver. About to pull my hair out! Please advise. :(
Answer
2012-06-05 14:03
Jose
GY-HM150/100:
can i save video onto a pc without using a memory card ?
Answer
2012-06-05 14:50
Patrick
Reference Series:
I need to extend the 3D emitter. What type of wire or cable should I use to splice it with?
Answer
2012-06-10 06:27
Caesar Nduna
Pro Cameras:
I bought a JVC SR-HD1250US and connecting to a Panasonic AV-HS400A switcher using SDI to record 1080 60i HD. We have Sony PMWEX1 HD cameras and connected with SDI as well. The JVC is not working ... Only showing a snowy screen. Please help!!!!
Answer
2012-06-11 13:39
dawn-alison Lundblad
Pro Cameras:
I have gy-hm 100u that i bought at vistek in edmonton alberta in 2009. i believe my warrantee is no longer available and i have a dead pixel id like to have serviced. i understand it is 100 per hour plus parts to fix, according to online surveys. however could you tell me a more approximate average of how long that sort of thing takes to fix in hours and parts price. id like to know if it is worth having it sent in for service.
Answer
2012-06-15 09:44
Miguel Bordo
Combo Decks:
Using the JVS SR-DVM600 to record old VHS tapes onto DVD. Using a JVS VHS player hooked into the L1 input of unit. The DVD recorder starts to record, but stops after 5 minutes. If you press record again (manually on machine) it creates another title, chapter1 of new title. Any suggestions as to why the DVD recording stops?
Answer
2012-06-16 10:55
ron
Combo Decks:
I have an SR-MV55U. I am trying to get it to manually dubb from the the middle of a SVHS tape to DVD - basically the entire second half of the tape. I have successfully manually dubbed from the beginning of a tape and also used the Just Dubbing feature. They worked fine. Followed all steps exactly but when it begins, it rewinds to the beginning of the tape instead of just starting where I position the tape. Within Copy Set, I have copy mode set to full copy and full disc and auto finalized set to OFF. I can't use 1 Prog since I have multiple index codes on the tape. any ideas would be appreciated. ron
Answer
2012-06-18 22:53
Ian rice
Combo Decks:
Where can i order a new HDD for my JVC SR-DVM700 And how much.
Answer
2012-06-22 07:43
Haris Mastrogeorge
GY-HD200/250U:
I have the HD-200 cam, and I m trying to rip a mini dv from another camera but eventhough it starts ripping I always get the lp tape invalid message every 10 seconds of rip. Any suggestions?
Answer
2012-06-26 16:23
Herbie
Blu-ray Recorders:
If I make a Blu Ray disc on the SR-HD1250US from an S-video connection of an 8mm analog tape will it convert it to a high definition picture and look sharp?
Answer
2012-07-02 14:10
Josh
Blu-ray Recorders:
I have SR-HD1500US Blu-Ray recorder, my problem is every time I attempt to burn a Blu-ray It starts and a few seconds later a message pops up saying "Dubbing is Complete"; but, there is nothing on the on disc and the disc is no longer usable. DVDs burn fine without Issue. I have also used two different brands of Blu-Rays to see if that was the issue. Video are being dubbed from HDD and are properly formatted to create a BDMV. How would I remedy this Problem
Answer
2012-07-04 00:29
Joshua Kell
GY-HM700/710/750/790:
I bought a JVC GY HM700U a year ago, but the VF has stopped working... I need this to shoot, please help me!!!!! (I am not talking about the LCD Screen)
Answer
2012-07-05 09:14
jack tankersley
Blu-ray Recorders:
My SR-HD1250 whihc I've owned for a year and use frequently has suddenly started giving me an error message whenever I attempt to dub. Whether dubbing from HDD to disc or camera to HDD it gives the same message. Some of the titles on the HDD have been dubbed several times in the past yet now I'm getting "some titles cannot be dubbed" message with every attempt. I tried unplugging the unit to reset but no change.
Answer
2012-07-05 12:21
John Salzwedel
Blu-ray Recorders:
do you have a FAQ section relating to the SR-HD2500US?
Answer
2012-07-05 13:19
Steve Miller
GY-HM700/710/750/790:
We currently have a GY-HD200 camera with the stock Fujinon Th16x5.5BRMU lens. We are consider replacing it with The GY-HT750U. Can we purchase just the camera body and use the lens from the old camera and everything work & look OK? If not, will the external zoom & focuser controls from the Fujinon lens work with the Canon lens? Thanks, Steve
Answer
2012-07-10 12:26
Martin Parning
GY-HM700/710/750/790:
I have a GY-HM790E. I need the 10 pin cable used for the studio terminal on the side of the camera. The terminal is used for tally and return video. What is the name of this cable and where do i find it? Thanks Martin
Answer
2012-07-11 04:33
Andy Thain
4K Camcorder:
When copying 4K files to a Mac, can the SDHC/SDXC card be inserted directly into a Macbook, one card at a time, and the files copied to the MAC this way? Would this be a faster than connecting the camera to the Mac via USB2.0
Answer
2012-07-11 07:09
PRAVENDRA PATEL
IP Security Products:
VR-N900U IP NETWORK RECORDER i LOST MAIN HARDDRIVE/FAIL. HOW DO IGET NEW HARDDRIVE AND ORIGINAL SOFTWARE.
Answer
2012-07-12 11:08
Becky
Blu-ray Recorders:
We have recorded to the HD of our SR-HD1250US but for some reason it will not record to the BD-R 6x 25GB discs (Brand-Falconmedia) We have tried everything and it doesn't seem to work.
Answer
2012-07-28 12:08
Richard Straus
Reference Series:
I wrote a TCP/IP driver a year ago for the DLA-RS60 to be controlled by a Control4 system. This worked well until last week. When the connection is made to the projector, it receives and handles the handshake properly (PJ_OK/PJREQ/PJACK). However, when it then posts a request like '3F 89 01 50 57 0A', the projector doesn't respond. I then thought I'd try the firmware upgrade that is available to see if that would help. It seemed to go through the upgrade ok, but the ILA-FPJ tool failed to query the firmware version either before or after the upgrade. So I cannot confirm if the upgrade worked. Any suggestions?
Answer
2012-08-02 14:19
tammy irwin
3D Products:
I have a dealer who is doing a sports bar it will have ambient light and a 165" 16:9 screen and we were wondering what you think about the DLARS45U
Answer
2012-08-03 14:04
Petr Holub
4K Camcorder:
Hello, what is the expected workflow for GY-HMQ10 4K camcorder using Adobe Premiere Pro on Windows? I'm asking since I know there is a utility for MacOS X that requires Final Cut Pro X, but I don't have this platform available. The poor man's solution is probably using those quadrant-based files, putting them onto the timeline and offsetting them into the final 4K frame. This is however tedious when it comes to more complex editing. Thanks, Petr
Answer
2012-08-06 05:20
RB
Pro Cameras:
I have a JVC Everio Camcorder GZ-MS240 compatibility issue with my AMD processor. The Everio software that was provided is not campatible with my processor. We cannot download the video to our computer to burn a DVD because of this. I need assistance either with a fix to this software if available or the name of a new type of software that I can purchase so that I can download the video and burn a DVD. I spoke to Pixellia already and they were no help because they have no fix for this issue.
Answer
2012-08-06 13:45
Sherwin Singh
GY-HM700/710/750/790:
I have a GY-HM 750e camera and I have been shooting in HD. I have been shooting with the gain off yet the image looks very grainy, even under good lighting conditions. Is there a setting on the camera that I can change to shot my video without having this 'grain" in the picture? I have tried everything i know. Please help!.
Answer
2012-08-07 21:16
Lauren
GY-HM700/710/750/790:
I am working with the JVC HM750. I recorded about 32gb of footage, with pressing the record button once to start and once to stop it. When I go to import the footage the JVC has created multiple 3.7gb clips. I need the clip to be continuous for editing, is this a setting? How should I fix this? Thanks, Lauren
Answer
2012-08-22 22:59
Brett Cullen
Pro Cameras:
JVC GY-HD201 I'm trying to get playback working of HDV-HD50p footage capture with this camera. Playback on the camera worked while filming, but now later it will not play back, instead playing a light blue screen with a broken time code. Is there anyway to fix this? I'm currently using these settings: Frame Rate: 50/25 1080I CAMERA: Off (tried with ON as well) HDV PB OUTPUT: PAL (tried with native as well) DOWN CON. [HDV]: LETTER PB TAPE: HDV
Answer
2012-08-24 10:30
Sean Maloney
Pro Cameras:
On the SR-HD2500US blu-ray recorder what is the diffirence between direct out and monitor out signals? There is a time delay between the two so I'm wondering if one is after it has been recorded.
Answer
2012-08-27 20:28
Mike Nutt
Pro Cameras:
I'm interested in the GY-HMQ10U and would like to use a Final Cut Pro X -based workflow. Wondering what kind of workstation hardware I would need to work in 4K. I work at an academic library, and don't need the processing power of Pixar, per se, but also don't want to hate life while I wait for the background rendering... Any thoughts on suggested RAM and processing requirements would be appreciated.
Answer
2012-08-28 12:55
Steve Loomis
GY-HM150/100:
I own an HM100U camera. I have done the class 10 card upgrade last year just after I purchased it. Later in the year, I return it for warranty repair of an auto exposure failure. When it was returned, it performed MUCH better in low light and white balance was much improved. Has there been ANY firmware upgrades that would explain this? I am looking to purchase another HM100U with very low hours. I want to make sure they will be exactly the same as they will be used in an indoor multicam shoot each week. I noticed when I received my camera back from repair that the standby indicator on screen was now green upon boot up and yellow after pausing from recording. The camera I am looking at is white at boot up, not sure after recording yet. If there is a firmware upgrade, how do I get it done to the second camera? I did not see any upgrades on your web site. One last thing. Can the current firmware be displayed via menu somewhere, if so, how? Thank You, Steve Loomis Enid, Oklahoma
Answer
2012-08-28 21:35
Mike Nutt
Pro Cameras:
Can you please offer some suggestions about the caliber of workstation this camera requires for production? Presumably a Mac Pro was intended to be used, but what about suggested RAM and GPU requirements and graphic card suggestions? I can't find any forum discussions of this camera's workflow. Also, the last character of these stupid captchas are impossible to see.
Answer
2012-09-01 15:19
Mike Janowski
Combo Decks:
I have an SR-MV45U, ser.# 063C0813. In the 4-5 years I have owned the unit, I have recorded 47 DVDs (I know, as I just erased all the title information from each of them.) I am attempting to dub a non-copy-protected VHS tape to DVD. However, when I put a blank DVD-R in the machine, I get a "disc error" message. I have followed the directions (to the best of my ability...you really ought to have a native English speaker proofread these books...) faithfully, and still cannot get the unit to dub my tape. What's wrong?
Answer
2012-09-17 10:09
Al Ringham
Blu-ray Recorders:
We have a SR-HD1500 that won't play anything. With less than 50 hours on it, all we get is 'reading' and then display reverts to show the input type. All discs play fine on a competitors' device. Do you have a firmware update or is this FSO?
Answer
2012-09-19 13:10
Scott M.
GY-HD110U:
I would use the unit as a camera, recording directly into a DVD recording deck. My business is legal video depositions. Would you verify that the time/date will output through the composite outs? That is crucial to my use of the camera. The GY-HD100U will NOT do this and I'm hoping they fixed that issue with the new model.
Answer
2012-10-01 15:08
Craig Adams
GY-HM700/710/750/790:
I own the HM700 and was shooting in full rain gear for about 20 minutes before it stopped recording and turned off. The camera wasn't really wet and has since dried out for over 48 hours. It still will not turn on and only blinks a red light. Is there some sort of a humidity sensor that can be re-set or does it have to go to the shop for repair?
Answer
2012-10-06 17:35
Alex Batista
GY-HM150/100:
Often I need to shoot events where one single shot (using 2 cameras) may last a full hour. When I do this, the camera automatically split the files in to several clips which makes editing much more difficult. If I have to shoot one single clip for one hour I need that clip to be ONE single clip. I've read the entire instructions manual without success. Is this something that can be set up? If so, how do I do it!? Thanks in advance!!
Answer
2012-10-08 08:03
ANGELO TUDOR
IP Security Products:
Dear Sir Can I use the XProtect Mobile App from ITunes created by Milestone Systems to control the recorder VR-N900U? I saw on the app details that can be used togheter with XProtect Enterprise 8 or higher. My recorder was installed in June 2008 and probably produced in 2007. I do not know what version of software it is inside but can I upgrade the XProtect Enterprise? Looking forward for your kind answer Regards Angelo Tudor
Answer
2012-10-09 00:12
Jay Campbell
Blu-ray Recorders:
Regarding the SR-HD1250US. I have Final Cut Pro 7 and currently by using the JVC DR-MV1 I can play the timeline through by using the firewire connection - in SD. In the same manner would I be able to play through an HD signal on this new recorder? Assuming of course that the FCP timeline is playing HD footage and the monitor attached to the SR-HD1250US is an HD monitor - connected by component or HDMI. Thanks, JC
Answer
2012-10-10 10:25
Mike Williams
GY-HD200/250U:
How can I record stereo audio on the HD200 when I have two mics plugged in? We're not shooting HD yet. Do I need to carry a mixer to keep the channels from splitting?
Answer
2012-10-10 15:14
GRUSON Claude
Pro Cameras:
What about zoom speed controls with gyhm600 ? Is it possible to set a fix low zoom speed for smooth traveling ? (I own a gyhm100 : nothing to do that)
Answer
2012-10-14 18:30
Lansing Johansen
Blu-ray Recorders:
I recently purchased the JVC SR-HD2500US Blu-Ray recorder. Is this unit capable of recording on the new LTH type BD-R discs? So far I have only used the more traditional HTL style discs. I certainly do not want to damage the unit or creat an error condition. Please advise. Thanks.
Answer
2012-10-17 18:03
Cory Plummer
Reference Series:
I have no problems using my RS45 in 3D with a Blu-ray player/3D disc, but 3D movies from my Time Warner/Cisco box won't. I've enabled the 3D mode in the cable box settings menu and manually changed the 3D mode on the projector, but I still get 2 images top and bottom.
Answer
2012-10-18 11:20
Tobin Threadgill
Combo Decks:
The is very upsetting considering the cost of this unit but my SR-DVM700US is saying it is unable to recognize disks after only burning bout 25 dvd's. If the DVD burner is bad can I burn to an external DVD burner via the DVD port. If not, what options do I have. I understand that the PMD0120A DVD burner is no longer available.
Answer
2012-10-23 06:09
Wolfram
Blu-ray Recorders:
SR-HD1500 does not read SDXC cards. what can i do?
Answer
2012-10-24 23:30
Phil Patnaude
Blu-ray Recorders:
Our TV station purchased your SR-HD2500US Blu Ray recorder. I am supposed to record our off air show recordings for archive. According to the book I should be able to record for 24hrs in AE mode with a Dual Layer Blu Ray disk. I can not get the dub to do that I only get the DR1,DR2,DR3 and DR4 choices. How do I get this to work so I can record our shows. Adivce please. phone is 574-344-5576.
Answer
2012-10-25 10:51
Curtis Aldrich
Combo Decks:
Can we record from our switcher directly to a JVC HDD/BR record deck?
Answer
2012-11-22 20:45
Donald Harvey
Reference Series:
I just installed a DLA rs 45 projector for a customer a little over a month ago and all has been fine till about an hour ago. The owner used it earlier today to watch football and all was fine. Then came back this evening to watch a movie and the unit will not project. They get a red stand by light, orange blinking lamp light (twice) and a red warning light. No projection at all, fan is running. The unit has only a few hundred hours on it and has only been in place for a bout 1.5 months. Please advise what to do. Tried power reset, checked filters also.
Answer
2012-11-23 20:16
Lorenzo Garcia
GY-HM150/100:
My Camera Produce audio Noise with the shotgun even with internal mic in use. What is Wrong. What Kind of Repair Needs.
Answer
2012-11-27 09:48
Jeff Schneider
Combo Decks:
When recording on a SR-MV45U deck (DVD), can the output be monitored real time on S-video out? Thanks JEff
Answer
2012-11-27 10:24
Andrew Greenshields
Reference Series:
Is it possible to stop the "Please wait... Lens memory loading" message when changing from one lens memory to another? I have my projector (RS55) set to change lens memories automatically using a TCP/IP command which is sent by the HTPC depending on the aspect ratio of the selected movie. This message partially obscures the screen and in some instances vital action at the beginning of the movie.
Answer
2012-11-27 23:43
Volker Herwig
Blu-ray Recorders:
What are the differences between JVC SR-HD1500AG and JVC SR-HD1500EU? Thank you for answering. Best regards V. Herwig
Answer
2012-11-30 14:26
Dan
Blu-ray Recorders:
When transferring from the SR-HD1250US HDD to a standard DVD on the SR-HD1250US's own DVD recorder, does the transfer happen in real time, or can it be done more quickly? Thank you!
Answer
2012-12-02 07:36
Kevin
Reference Series:
I am trying to use the 3.5mm remote input on the PJ to control IR commands from a Universal remote IR output. All commands work except for the "power on" command. I noticed there are other people experiencing the same problem when I searched online. Is there a bug that prevents the unit from receiving commands when the PJ is powered off? Is there a fix or do I have to resort to using an emitter?
Answer
2012-12-12 22:56
Nathan Eades
GY-HM150/100:
I downloaded the firmware update required to recognize a 32 GB class 10 SDHC card. However, upon checking a 64 GB SDXC card, which I purchased at the same time as the 32, my camera still didn't recognize it. Furthermore, it won't let me format it. What do you recommend?
Answer
2012-12-14 14:16
Wilky Black
Pro Cameras:
i have the jvc 750 and i'd like to use a prime lens or any slr lens with this camera. what kind of adapters do i need? thanks
Answer
2012-12-31 22:48
Dan Cookson
Reference Series:
New RS55u the lens cover door squeaks when closing, For a projector in this price range i expect it to work perfectly. How do i proceed? Does it need to be serviced?
Answer
2013-01-08 01:41
John Scheck
Blu-ray Recorders:
We are considering purchasing your SR-HD2500US Blu-ray recorder for our TV station to make DVD and Blu-ray commercial and programming dubs for our clients and other stations in our market area. However, before we do make the plunge, we must know if your SR-HD2500US Blu-Ray recorder will preserve closed captioning information if present on the original HD-SDI video source onto the finished Blu-ray or DVD disc? If it strips out the information, then the Blu-ray (or DVD) disc is useless for airing on ours or any other broadcast station because in order to be FCC compliant, our programming must be captioned. I have searched the manual high and low and have not found any information regarding closed captioning preservation. Again, in order for us to purchase your product, it must be able to preserve closed captions from the HD-SDI input source. Please advise as soon as possible! Thank you, John Scheck Senior Director KAKE-TV 1500 N. West St. Wichita, KS 67203-1323 (316) 946-1308
Answer
2013-01-26 09:09
kls
Reference Series:
I have an RS4800 and been trying to setup lens memory for 2:35 and 16:9. I have done it a few times and each time the projector seems to remember more steps in the adjustment. I would like to do this again and start from scratch. Is there a recommended approach to maximize accuracy, reduce the number of steps (fine tune adjustments) to get a very quick and clean jump from 2:35 to 16:9. Also, are there discretes for these memory settings? I would like to add them to my C4 vs having to macro all of the key clicks. Thanks!
Answer
2013-02-07 19:15
Jody Ballenger
GY-HM150/100:
I just opened my brand new GY-HM150. I put in a brand new 32GB SandDisc SDHC Card. I keep getting the message "Incorrect" in either slot A or B. I tried an older 8GB and got the same error.
Answer
2013-02-13 13:46
vladbox
GY-HM150/100:
I have a hot pixel on the LCD screen on my 10 month old HM150U. Is there any way to do a hard reset that would bring the pixel back? Thanks
Answer
2013-02-16 04:30
Donny Shu
Blu-ray Recorders:
Hello, I have the JVC SR-HD2500US recorder. The manual does not provide the recording bit rate for each recording mode. Could you provide me with this information in Mbps, please? There are 13 recording modes, as stated on page 30 of the manual. I would like to know each of them, if possible.
Answer
2013-02-22 00:38
vincent au
Blu-ray Recorders:
where can i buy jvc sr-hd1500 (blu-ray disc & hdd recorder) with PAL version and with power requirement ac220v-240v, 50/60Hz around asia or south east asia? vincent au seremban, malaysia
Answer
2013-02-28 14:03
Jeff Stanley
D-ILA Projectors:
I have a DLA-RS2 projector and need to replace the BHL 5009-s lamp. Since my last replacement, available lamps are no longer JVC, but "OEM bulbs with new case". Much less expensive, but it is difficult to tell what lamp will give me the best quality picture and match to what I have enjoyed for the past 3 years. Any recommendations would be apprecitated. Thanks. - Jeff Stanley 678-764-4329
Answer
2013-03-04 16:42
Eric Rand
Blu-ray Recorders:
Does the JVC SR-HD2500US support closed captions when using the SDI input? Will it pass those closed captions when playing out via the SDI out?
Answer
2013-03-05 10:22
Brian Knoblock
Pro Cameras:
When I import Quick Time formatted video from a GY-HM150 camera into Final Cut Pro the Real Time render is no longer available on the Timeline. I have to render the entire clip initially and then re-render it if I make any change. If the video is in Quick Time why is it not being recognized by FCP 7 and why can't I use it without constant manual rendering
Answer
2013-03-09 14:51
Ivo Torres
Blu-ray Recorders:
I get an error message "incompatible disk" when I try to use a VERBATIM DVD+RW 4.7 GB / 4x/120min disk in a SR-HD1500US recorder. The device is working properly as it recorded another DVD/RW from another brand. Why does it gives this "incomplatible disk" message?
Answer
2013-03-13 08:49
Howie Sydell
Pro Cameras:
My Camera is the GY HM100U. I have timecode in free running mode, set to time of day. I find that the time code sticks on occasion when it changes clips. I have samples of what I mean. It then jumps :ie it goes from 2:28:20:25 to 2:33:14:19. How can I prevent this?
Answer
2013-03-14 12:54
Rick Ingram
Combo Decks:
I have a SR-MV45 VHS/DVD deck that will not play professional DVDs sent to me in the last 12 month or so. I can play older DVDs so I know the drive is working. Is there any way to update the firmware on the DVD drive or any other fix so this player will play the newer DVDs. They are not Blu Ray and I assume this is some codec problem. Any help would be appreciated.
Answer
2013-03-24 10:37
David Fieler
Combo Decks:
The display on my JVC DVD/DVR - Model# DR-MV1S - keeps flashing "loading". I cannot get it to stop unless I unplug it. After I connect the plug again, it does the same thing. I cannot turn it off regularly and no other buttons or the remote affects it. What is wrong and how do I fix it?
Answer
2013-03-25 18:08
Ken Reichel
Blu-ray Recorders:
DVD-R's don't work in VR mode (They wont play on an SD-DVD machine, need TS/VS folders not RTAV) Manual says it can record to DVD-RW's, but formatting isn't allowed with those either. How can I make Live SD-DVD's with this $4000.00 unit, (For 4K it ought to make a glass master AND massage my feet, for goodness sake,
Answer
2013-04-19 00:14
Lavoy Shepherd
Blu-ray Recorders:
I have a JVC SR-HD2500US It says on page 27 of the manual that DVD-R discs Format is Supported and Formatting NOT Required in the Video Mode. When I insert a JVC Taiyo Yuden DVD-R x8 disc a message comes up on the screen, it says. CONFIRM There is no playable media inserted. If I push record with the same disc in the machine it puts another message on the screen that says CONFIRM Unable to perform recording on this Disc Format the Disc or insert a new Disc. If I try to Format the Disc it will only let me format in the VR mode not in the Video mode. Yet the book says that I don't need to format a disc if I am using the video mode I have tried DVD-R x16 Discs as well with the exact same results. What am I doing, or reading wrong. I would like to Live record from a JVC GY-HM700u video camera I am connected to the machine via the composite video input. The reason I am connecting that way is in the end I will be Running 3 GY-HM700u cameras through my Tricaster Studio and then record the output to DVD-R discs. Please Help Lavoy Shepherd 805-686-1010 lavoyshep@yahoo.com Thank You
Answer
2013-04-26 13:32
Seán Wrenn
GY-HM150/100:
I have a JVC ProHD GY-HM100E, and about a month ago a white pixel (hot/dead pixel?) appeared in my footage. I noticed it when I was edit a bunch of footage and the white pixel appeared in all of them in the exact same area (centre of the upper right hand quadrant of the frame)The problem is ongoing now. Is there any way to fix this issue from the cameras menus? Any help would be much appreciated. Thanks, Seán
Answer
2013-05-02 16:46
Scott Whitt
GY-HM700/710/750/790:
When I plug in the USB cable to camera, it prompts me to change/cancel. I select change,for USB mode. My pc shows USB device not recognized. Is there s system reset or some setting in the camera that would affect the USB ? Tried different cable and computer, same result.
Answer
2013-05-03 14:31
Michael Goldstein
GY-HM150/100:
Is there a way to lock the HDMI output of the GY-HM100 at 720p? My application requires that I stream the HDMI output to a HDMi-to-VGA converter and then to a VGA matrix switch for output to several projectors and an additional system that can only take progressive (not interlaced) fields. The camera wants to output 1080i. I know I can lock to 480p but we want HD at the destination, so 720p would be optimal. Thanks!
Answer
2013-05-18 15:32
Chuck
Reference Series:
I have a customer with a RS45 and 1065 hours on the original lamp that producing a very dim image. Lamp issue? If so, what type of warranty does the lamp have?
Answer
2013-05-24 12:08
Francisco Beltran
GY-HM150/100:
I cannot hear the sound on MP4 files recorded with the camcorder. I tried on several computers and none reproduce the sound of the file.
Answer
2013-05-28 23:00
Song Wonyong
GY-HD200/250U:
I have a GY-HD250 camera, but I have four little dashes in the bottom left of the screen. How can I get rid of this dashes? Thanks.
Answer
2013-05-30 13:03
Matthew Drury
Blu-ray Recorders:
I didn't see anything related to HDCP playback on the SR-HD2500US. Does this allow HDCP protected blu-ray discs to be played to the SDI outputs? This seems to be a problem among other professional players.
Answer
2013-05-31 13:03
fredsky
Blu-ray Recorders:
hi JVC! how about recording CC line21 in DVD ? this doesn't work... also how about just pass-through them on playback? even the analog output is blanking CC. in professional word, we do a lot of CC; and DVD are a easy and cheap way for customers to validate them.
Answer
2013-06-04 10:40
Jose Dias
GY-HM150/100:
Power shut down while recording. Cant access the last file saved. How to recover this file?
Answer
2013-06-27 09:09
David Walton
Pro Cameras:
Test queston
Answer
2013-07-12 13:29
Frank Catscottage
GY-HM150/100:
Hello, I work with the GY HM-100 and use a Sandisk Extreme 30MB/s, class 10, 32GB. One of the clips that I recorded show 2 yellow flags and when I play the clip in-camera I get the message "Memory Card error". Is there any way to repair this, since the footage is very important to me! (All the other clips shot on he the same card are fine). Could you please help me out on this? Best regards from The Netherlands
Answer
2013-07-12 14:23
Allan Woosley
GY-HM700/710/750/790:
I need the pinout connections for the Studio intercom package 5 pin XLR please.
Answer
2013-07-15 22:44
Edwin Deinert
Blu-ray Recorders:
Dear madam, sir, We have some JVC SRHD-2500EU units. We are trying to record directly SD/ HD signals (SDI-input) on DVD as described on page 49 in the instruction manual. Unfortunally, the units do not start recording. Please, can you help us with this case?! We have tried several brands of DVD-R and DVD-RW. Thank you in advance. Best regards, Edwin Deinert. Ericsson.
Answer
2013-07-20 17:36
Jeff Hollinshead
GY-HM700/710/750/790:
Hello, I will be installing three JVC GY-HM790 Cameras along with three RM-HP790DU Camera Control Units and KA-M790G Multicore Studio Units. I will need to interface a Clear Com MS-702 Main Station with the three CCU's. I have read that a Clear Com IF4W4 Interface Unit will be need to provide proper operation, is this correct? Please provide the equipment and setup information necessary to provide correct operation of the above setup. Thanks, Jeff
Answer
2013-08-14 12:08
Alfredo Aguillon
Pro Cameras:
i have a JVC 750 camera has dead pixels, it became the pixel compen and count over ERROR sending turn off and turn on over again
Answer
2013-08-27 10:51
mike parker
Combo Decks:
What is the part number of the DVD drive for the JVC SR-DVM600 And can the loading motor still be purchased?
Answer
2013-09-09 07:07
ayman afghani
Blu-ray Recorders:
i would like to know if SR-HD2500 record and play PAL format ??? thank you
Answer
2013-09-12 10:09
Tom Peterfay
Pro Cameras:
Hi, I would like to know if there's a firmware update for KA-MR100 to use with SDHC adaptors? I'm using a JVC HD-200B Regards, Tom
Answer
2013-09-17 20:30
Andrew Moody
Reference Series:
Where can I find the IR hex codes for the RS46U projector?
Answer
2013-09-20 11:35
Natalia
Blu-ray Recorders:
How I can chance the remote control code when It does not work and my recoder don't recognize my control
Answer
2013-10-02 15:50
Todd Biske
Blu-ray Recorders:
Anyone having problems reading blu-ray video back into a computer that has been written by the SR-HD2500US? I have two blu-rays created by the SR-HD2500US that play fine on a blu-ray player, but when put into a Mac with a Samsung SE-506 BD Writer, the Mac is only able to see a portion of the video. In one case it was about 20 minutes of a 2 hour video, in the other case it was 1 minute of a nearly 90 minute video. The video is clearly there, as it can be watched on a blu-ray, but something about the way the file is written is causing problems. This is a significant problem, as we need to do post-recording editing a computer, rather than just letting the JVC unit create the discs, but the only way to get video from the JVC unit to a computer is to write it out to a blu-ray disc.
Answer
2013-10-03 09:50
Natalie
Blu-ray Recorders:
How Can I import media to the hard drive of the jvc sr-hd1250us blu-ray disc & hdd recorder without a camera or an SD, I have a mac.
Answer
2013-10-14 16:15
steve
4K Camcorder:
What color compression mode is used for the four HDMI outputs? is it 4:2:2? Is it 8-bits?
Answer
2013-10-16 07:48
Vladimir Leon
Combo Decks:
Good day, I work at the Harvard Graduate School of Education. We have using your SR-MV45U combo deck in several of our classrooms. Teaching fellows have been able to record lectures to DVDs for many years and we've had excellent results. For some reason 7 of our decks stopped working this past month. They all started to behave in the same way: you start recording and about 3 minutes into it the unit powers itself off. Any idea what could be causing this? Thank you, Vladimir Leon HGSE IT Media Technician
Answer
2013-11-11 17:46
Mauricio
GY-HD110U:
How to avoid the "ghosty" images produced when shooting in 24p?
Answer
2013-11-11 17:52
Mauricio
GY-HD110U:
Hi, is there a way to avoid this "ghosty" effect, almost like a doubled image, when the clip is paused, sometimes even in movement, I tried everything, changing frame rate, combining speed shutter, I've noticed a little less in 720p/30. Please let me know what Im doing wrong. Thanks
Answer
2013-11-16 20:01
Tim Parfitt
GY-HM700/710/750/790:
Can the camera record one long file instead of multiple shorter files? is there any way to adjust the record time between clip splits?
Answer
2013-11-17 10:35
Loay
D-ILA Projectors:
After I replace the bulb on my JVC 3d projector model 3x, I feel that the colored has been fade little, and the image quality not like before. So from what is this issue?
Answer
2013-11-19 11:52
steven thomas
4K Camcorder:
Are the four HDMI outputs using 4:2:2 color with 8 bits?
Answer
2013-12-31 14:53
babu
Pro Cameras:
how can i get preview a/v out from JVC GY700 please tell me about set up of A/V out
Answer
2014-01-23 18:52
keith obrien
GY-HM700/710/750/790:
i have shot on 32gb sansdisk sd card,put into card reader,on mac running snow leopard and files get sorted as xml,which i cant open with final cut pro 07.why has this happened and how to fix?
Answer
2014-01-26 16:47
Paul Marshall
GY-HM700/710/750/790:
If using multiple GY-HM790 camaras in conjunction with the rm-hp250 CCU what is the best way of setting the white ballanc to the same setting for all cameras without having to manualy set the white ballance for each camera with a white card as the colour temperature might have shifted by the time one got round to setting all cameras manualy.
Answer
2014-01-30 07:27
Ron
Pro Cameras:
What is the size limit and Class for the SDHC card that can be used with the SRHD1500US?
Answer
2014-02-06 07:24
Jim Green
GY-HM150/100:
Just bought a GY-HM150U and the main menu brings up favorites menu which only lets me exit out. When I choose main menu from the favorites menu, half the options, including RecordSet, is grayed out. I'd reset and start over but that option is grayed out as well. Help!
Answer
2014-02-17 13:52
Paul Del Pizzo
GY-HD110U:
Will the viewfinder/eyepiece (Model #SC-46425-001-H) for the GY-HD250 work with the GY-HD110 camera?
Answer
2014-02-19 14:39
Tom Roeck
D-ILA Projectors:
Re: JVC DLA-RS66 I have a large Stewart "CineCurve" screen. It appears as if the projector is programmed to project on a flat screen, instead of a curved screen. Is there software available to correct for curved screen geometry?
Answer
2014-03-13 14:40
Larry Baker
GY-HM150/100:
Is there a way to add an extender on the lens?
Answer
2014-03-19 04:38
Sam kostarellis
Analog Security Products:
Can not get live video stream via 4g on a VR-D1008 from a remote location. Wi-fi from a remote location connects great, also it is connecting on 4g because it indicates fluent on all cams just no video, but you can view recorded video. Open ports are 80,8081,554, also workers fine via ie and client software via Mac and PC Thank you, Sam
Answer
2014-03-20 22:24
Marcus
Blu-ray Recorders:
Hello, I have the JVC SR-HD2500 BluRay recorder. I am streaming to setup Live streaming for my church. What is the difference between the SDI out and the SDI through out ports on the back panel? Do both ports output audio?
Answer
2014-04-08 08:40
David Wilchek
GY-HM600/650:
Here at work we currently have a GY-HM790 camera. We are in the process of purchasing a second HY-HM790 and a GY-HM600. I personally own a GY-HM600 and brought it into work to compare the two. I found I could not get them to match. It seems it is more than white balance and color matching as I went through EVERY setting to ensure everything was the same. Any advice on this matter? The 600 may not be of use to us if they won't match the 790. We wanted the third camera to be smaller for tight hand-held shots. Please help, as we may not be able to get the 600 as desired. David
Answer
2014-04-13 11:36
martin beeren
Pro Cameras:
I have the gy hm 850e, can i playback a scene per time. I have 5 scenes and i wants only playback the first, and then it must stop playback.
Answer
2014-04-15 10:59
Ed
Pro Cameras:
3.5 questions, all related to the GY-HM890U. 1. What is the recommended WiFi adaptor for the GY HM 890? 2. If a battery is on the Gold Mount, and power is supplied to the camera, but the camera is turned off, does the battery on the camera charge? 3.1 Please explain better why I would need to have a static IP address on the LTE modem. 3.2 If this is being used with a transversal server such as Zixi or others, should that eliminate the need for a static IP 4. Not a question, but an observation. AT&T says they no longer have the LTE modem specified, so I had to purchase the VZW Pantech 295, and VZW has a substantial setup charge for static IP.
Answer
2014-04-18 12:22
Shanna Dempsey
Combo Decks:
I there any way I can export HDD videos from my JVC SR-DVM700 onto my computer for editing?
Answer
2014-04-19 15:16
Martin Beeren
Pro Cameras:
what improvements there are after update V0102-0028. on the jvc gy-hm850e
Answer
2014-04-23 02:07
Kings
D-ILA Projectors:
Hi there, I am about to order a X500R and have a question regarding the screen I should buy. Will the Intelligent Lens Memory feature (ILM) of X500R give me full benefits on a screen that is 16:9 aspect ratio? Meaning will I be able to play Cinema Scope (2.35:1) content full size on the 16:9 screen with the shadow bars outside the screen? In other words, will ILM work both ways (resize 16:9 content to 2.35:1 and vice versa? Or SHOULD I HAVE TO buy a 2.35:1 screen to get the benefits of the ILM feature. Best Regards, Kings
Answer
2014-04-25 01:52
Jörg Schulze
GY-HD200/250U:
I have a GY-HD200 with HD-SDI-Connector. Since Yesterday the HD-SDI-Signal i can only transfer about 1m. When i have 50m Cable, the Monitor say: "unsupported signal" What can i do?
Answer
2014-04-29 17:17
norberto
D-ILA Projectors:
whats the difference between the procision model dla-x700r and the reference model dla-rs57u
Answer
2014-05-15 07:14
Miriam Wallace
Projectors in general:
I bought a 70'jvc rear projector TV off Craigslist was told it only need a bulb brought bulb and still display the same thing when I plugged up cable and try to get channel it says signal weak and no program flashing I don't have original remote what do I do (HD70A476AAA) please help
Answer
2014-05-17 10:48
MARK
Pro Cameras:
cannot see date and time stamp on hd sports camera (ADDICTION)
Answer
2014-05-19 00:04
Gordon
GY-HM150/100:
Recently purchased a GY-HM150E. It has on the last three occasions "frozen" on me. Latest: I was recording a football match using Sandisk Extreme Plus 32GB cards in each slot (recording DUAL), according to the LCD display there was 8 min left on each card. The zoom froze, the LCD screen display was flickering and the access light on the hand grip was flashing green and the read camera light on the handgrip was not on. Each time this has happened (3 now) the only thing I have been able to do is turn off the camera, remove the cards, remove the power and battery and leave it for at least 24 hours. If I turn the camera on within a shorter amount of time the green access light continually flashes and nothing shows on the LCD. Any thoughts?
Answer
2014-05-19 13:12
Barry W. Lynn
Projectors in general:
If I use lens memory in a JVC-4K projector to show a 16X9 film on a 2:35 screen, won't there be black bars on the sides of my horizontally centered picture?
Answer
2014-05-23 02:16
roland barth
Pro Cameras:
i have a dead pixel on a GY-HM150E. how can i repair it?
Answer
2014-06-12 11:48
Ryan
Pro Cameras:
Our church has the GY-HM150U camcorder and we continuously record approximately 40 minutes of sermon every Sunday. When we are done recording and are attempting to drop the single clip into our computer, the one recording is automatically split up to three clips even though we never stopped the recording during the 40 minutes. Rec Mode is set on Normal but it still breaks up the single clip to multiple clips after we stop recording.
Answer
2014-06-17 19:38
juan franco
Reference Series:
hi i have a DLA RS56U projector with 70 hours of lamp use (the projector it is new) and suddenly thin vertical lines appear in half of the screen can you help me thank you
Answer
2014-06-18 06:19
juan franco
Reference Series:
i have a DLA RS56U projector with 70 hours of lamp use (the projector is new) and suddenly thin vertical lines appear in half of the screen. can you help me. thank you
Answer
2014-06-18 10:45
ed bukont
Pro Cameras:
Regarding GY HM890U. How do I use the camera with RTMP (Push) such as U-stream? I do not see in the camera an option for this (where as there are Pull type options for RTP and RTSP) nor a screen with fields appropriate for entering such data. The camera is running version 0102-0028. Thank you
Answer
2014-06-18 10:56
Bryce
D-ILA Projectors:
Hello, I'm having problems setting up my DLA-RS4910U projector with a 2:35 screen. When I go into the lens setup I cannot get the zoom to widen the image without having the image overlap the screen height on both the top and bottom.
Answer
2014-06-21 09:01
scott
Pro Cameras:
What is AGC? I gather its the Grip ass'y. "The GY-HM150 records 2 channels of uncompressed LPCM (linear pulse code modulated) 16 bit audio sampled at 48Khz. Audio levels can be controlled manually, or automatically using AGC."
Answer
2014-06-21 09:08
scott
Pro Cameras:
What is phantom power? Balanced XLR connectors are provided on the handle for an external microphone and/or wireless receiver. 48V phantom power is available for each microphone. Sure it sounds cool, but could I get a more functional description? Thanks
Answer
2014-07-02 15:22
phil cartier
Blu-ray Recorders:
I am using a SR-HD1500US in a video production suite. I am not able to record video & audio using the iLink video input and audio using the analog RCA inputs? I have read the manual but do not see how I can do this. Please assist. Many TIA, Phil.
Answer
2014-07-03 19:54
Neal Pacleb
Blu-ray Recorders:
I have an SR-HD1500US Blu-ray player/recorder. I was told from someone who was using it that some Blu-ray features are not available on the unit and that the unit would need some kind of update. Does this player support all Blu-ray features that are available? Is it possible to upgrade the firmware on this Blu-ray player? If it is possible, where can I get the updated firmware and what is the procedure to upgrade the firmware?
Answer
2014-07-16 14:11
On-Site Video
GY-HM600/650:
Purchased 2 GY-HM600U cameras recently. Updated both of them to the latest install V0208 on both cameras. Both cameras have been okay except for one major problem that we cannot figure out that only happens with one of them. One of the cameras on a majority of shots while zooming will go completely out of focus multiple times in one simple zoom while the camera is in auto focus in both the manual and full auto modes. In the manual mode, when auto focus is selected, even while the camera is completely still on a tripod, some images will cause the focus to pulse repeatedly and not find any focus. It almost makes the image look like there's a lightning storm. I am confused as this only happens with the one camera and not the other one we got exactly the same. I don't know if there is a setting I am unaware of that could be causing this, or if one of the cameras is just defective. Thank you for any help.
Answer
2014-07-29 13:31
Adam Schreck
GY-HM150/100:
There's no true HD HDMI signal out of this camera (GY-HM 150u)? The sales documentation (see the "Video/Audio Outputs" section and table) says there is: http://pro.jvc.com/prof/attributes/tech_desc.jsp?model_id=MDL102117&feature_id=02 But the tech manual (pp. 73, "A/V Out Menu" -> HDMI Output) says that only the following resolutions are available: 480i, 480p, 576i, 576p and Auto. When I try to send signal out (to a Black Magic Intensity Shuttle box) I don't see any choices for the HDMI signal other than 480i or 480p. Is there a way to get either a 1020 or 780 signal out of the camera via HDMI?
Answer
2014-08-05 14:39
Gethin
GY-HM150/100:
Hi, I haven't got much experience in filming. I'm using the GY-HM100 camera but I have some sort of a problem. When I try to use the camera on a 1080 24 setting, the footage wobbles up and down, even if I'm using a tripod. I've tried using manual and auto focus but it still wobbles. The only time the camera screen doesn't wobble, is when I change the system select to 1080-60/30. Is this normal? Best, Gethin
Answer
2014-08-19 12:31
Jim Wagner
GY-HM150/100:
I recorded a presentation in our office and I had headphones on to check for sound quality. Everything sounded great. When I play back the recording I have to have my pc speakers at maximum and I can barely hear it. What am I doing wrong?
Answer
2014-09-01 19:43
James Cormier
Flat Panel Monitors:
HDMI reset code for my JVC Black Crystal 3001? TV says no signal for HDMI connections.
Answer
2014-09-03 16:30
John
GY-HM150/100:
Which lens zoom controllers work with the GY-HM150u? Can a lanc controller(sony-Cannon)be converted with an adapter?
Answer
2014-09-07 16:37
Lisa
D-ILA Projectors:
We have have a d-Ilya projector model rs46u. While my son plus xbox the screen will turn blue then black. When he resets the screen picture returns to normal for varying lengths of time. The game resumes where it left off?? Any suggestions?? Thank you
Answer
2014-09-18 13:53
emiliano
D-ILA Projectors:
I have a hd52g786projection t.v. I have replaced the lamp without success. I was told the lamp is tested before I recived it. I cannot tell if it is lit. How can I test this lamp? My power lamp blinks continuously. I must unplug from power source. Does the lamp work in conjuction with something else before it will lite???
Answer
2014-09-24 08:26
DAVID COX
Flat Panel Monitors:
To what degree of use is the PS840UD designed? That is, is it designed for 24/7 use, 20/7 use, 16/7 use. All I've been able to find in the specs is that it should operate for 50,000 hours.
Answer
2014-09-30 09:39
raul ramos
GY-HM850/890:
how can i fixed de back focus
Answer
2014-10-08 16:50
Oliver Parke
GY-HM850/890:
Does the camera record in 4:2:2 color space at its highest recording setting? I can't see this detail in the specs.
Answer
2014-10-09 10:55
Ed
GY-HD200/250U:
We have a GY-HD200 and a GY-HD250U! Both are recording with 'missing pixels'. Is there a way to fix this. It was suggested we do multiple "black balances"?? Is this an option and if so how is it done?
Answer
2014-10-12 15:53
Ashok Mamtora
Reference Series:
DLA-RS57U is able to play native 4k video source which is HDCP 2.2 compliant?
Answer
2014-10-18 11:34
Keith
GY-HM700/710/750/790:
How do you get perfect white balance form the GY-HM 700? I constantly get an orangish color when I white balance the camera. I balance in manual (in the same location). I will test with and without n/d filter in the same location and it will change to an orangish color and I can not get it to return to perfect color balance. Is there a way to balance this camera for perfect color? Thanks, Keith
Answer
2014-10-22 13:42
Keith West
GY-HM150/100:
Can 150 record SD as .MP4 file format? My Media Composer is 2.3 and won't read .MOV.
Answer
2014-10-28 22:21
Charles Gibson
Combo Decks:
Sad to say that I can not finalize a recorded DVD without the remote. Misplaced the remote, and tried to use a universal remote, which wasn't effective because I could not access the menu to "finalize" the disk. Where can I get a remote for the JVC SR-MV45?
Answer
2014-11-09 18:48
Griff Schoonover
GY-HM70U:
I just purchase this unit from B & H. I had my first chance to take it out shooting last night. I video a Christmas Parade and I used pause about 40 times over a hour and half. When I got home and played it back, all clips had on and off audio and the video would speed up and slow down to normal in all clips. I had it recording on auto for the hold recording time. Is there something I'm doing wrong, can not find any info the the book about this. With the holiday season just around the corner and I do a lot video work for a local school, I need help. Thank You Griff Schoonover
Answer
2014-11-10 17:29
greg lipe
GY-HM700/710/750/790:
I have a GY-HM 110 and I want to buy a GY-HM 710. Can I use my 110 camera lens (Fujinon Th16x5.5BRMU) on the 710 or do I need to purchase a lens that works with the 710?
Answer
2014-11-13 12:00
Andres Torres
GY-HM150/100:
Camera will not work with battery. Have tried multiple fully charged batteries and will not turn on. Camera will turn on when plugged into wall. Is this an electronic error or a physical one. Thanks for any help you can provide.
Answer
2014-11-14 07:25
Austin Sanders
Blu-ray Recorders:
I have an SR-HD2500US BLU-RAY DISC & HDD RECORDER w/HD SCI. Is it possible to take recordings saved to the hard drive and EXPORT them onto a flash drive or external hard drive?
Answer
2014-11-16 14:05
Haresh
GY-HM70U:
Does camara has speaker
Answer
2014-11-17 08:55
Patrick Moochler
GY-HM150/100:
I've lost menu access through the menu/thumb button. Is there another way to access the menu.
Answer
2014-12-09 18:51
prechezy
GY-HM70U:
Hello, Please can you tell me how to set my JVC GY Hm70u camera because I have noticed that it emits too much grain even with lights except im having an outdoor recording. Your response will be appreciated.
Answer
2014-12-14 14:23
Martin Ruel
D-ILA Projectors:
Hi, i recently upgraded from HD250 to X35B. The problem is, i can't to get the black level performance from the X35B like the HD250. On the X35B, i don't see shadow details as if all the dark greys are all black. I found that switching HDMI setting from Standard to Enhanced gives me the shadows detail im looking for but the prob is that all the image is washed out. Could you help me what settings are wrong and what should i do ? Thanks
Answer
2014-12-15 19:25
Mari
FAQ pages:
My husband has a JVC stereo receiver and when the balance bar is moved all the way to the right we get static, does that mean the receiver is going bad or the speaker?
Answer
2014-12-19 05:05
Wilson
Blu-ray Recorders:
How can I get my JVC 2500 DVR to spit out video on a res other than 1080i.
Answer
2014-12-26 08:48
Kevin Luas
Pro Cameras:
I have gotten a new computer and can not find my original software CD for "power cinema NE" for my video camera. Can you please send me link for where I can downloaded it from. Thanks Kevin
Answer
2015-01-04 12:47
PAF TELEVISION FRANCE
D-ILA Projectors:
Is it possible to register(record) directly(live) on the hard disk an exit(release) of video state control BNC ? JVC SR-HD1250
Answer
2015-01-06 14:05
amos
GY-HM850/890:
we have a gy-hm890u ser#13940061. we are have a problem with the back focus will not set .
Answer
2015-01-23 13:32
Louis
Combo Decks:
We have a SR-DVM600U then we stop one interview and then start another the unit is not keeping then separate. Also sometimes it doesn't delte previously recorded interviews
Answer
2015-01-26 11:42
Florante Alcano
GY-HM150/100:
I have a focushing fault on my JVC GY-HM150E. at first camera start'up it is ok. after a few zooming in and out it will become de focust-OUT OF FUCUST and it wont focust anymore either in auto or manual. reset it several times according to operating manual. it will become ok, but after several zooming in and out faults comes back again.when i set the camera in auto focus at zoom out position, placing my hands in front of the camera lens just a few seconds can cause out of focust and the camera cannot focust again unless you reset it. but sometimes after reseting problems still there... need help on this matter. thank you!
Answer
2015-02-04 09:30
Tim Phillips
GY-HM700/710/750/790:
I have two GY710U cameras. One has developed a dead pixel as described by many other JVC pro camera owners, however the pixel compensation menu instructions found on other models don't work on the 710. Specifically, there is no option to change the setting to a 720 resolution. How can I correct the problem on my 710 model?
Answer
2015-02-06 01:57
Rob Wright
GY-HD200/250U:
We currently have some JVC gy-hd251 cameras in our TV studio. One of the devices has green lines on the left hand side of the display and the external output monitor. In addition the overall image being shot has a red tint on it. Can you please offer any advise as to what might be causing this fault. Thanks Rob
Answer
2015-02-10 12:19
manuel weber
D-ILA Projectors:
i am a colorist and evaluating d-ilas for work. do you have a gammut comparison of your models? how about colour stability over runtime? thanks best manu
Answer
2015-03-06 10:24
eleanor wagner
D-ILA Projectors:
how do I get the icons off the bottom of my tv screen
Answer
2015-03-13 09:25
Paul
GY-HD200/250U:
How can I restore the GY-HD250 to factory settings? A full reset.
Answer
2015-03-13 13:08
Jeff
D-ILA Projectors:
What screen do you suggest with a DLA-RS6710
Answer
2015-03-16 10:18
Paticia Burrell
Combo Decks:
One of the sound tech guys at my church was recording the service. It was then dubbed to a DVD come to find out there was no sound. Can the sound be restored or should we count it as a loss?
Answer
2015-03-19 12:56
Phillip Brooks
Blu-ray Recorders:
JVC's SR-HD2500US If there is a power loss during recording, is the recorded data lost?
Answer
2015-04-06 11:42
ruggiero
D-ILA Projectors:
Ho problemi di aggangio segnale con un cavo di circa 12 metri come posso rimediare a tale inconvenientie grazie
Answer
2015-05-06 07:50
Caio Guedes
GY-HMQ10 (early 4K camcorder):
I am currently tryng to capture a 1080p(then I'll proceed to 4K) stream of video and display in a pc but I have no success in doing that. When a put the mini HDMI/HDMI in the first port neither a PC nor a Smartv are able to transmit the image. The current camera features are enabled: HDMI OUTPUT(AUTO) | DISPLAY ON TV(ON) and when I press the record button(It's the first time I use this kind of camera) it only display a no memory card error/warning. A guiding would be very appreciated.
Answer
2015-05-06 11:31
Ron
Blu-ray Recorders:
Can you pause live recording on you blue ray recorders?
Answer
2015-05-28 13:37
Dan Fiock
Blu-ray Recorders:
I have a SR-HD2500 and want to record a "LOOPING" playback BluRay that will be played back on another machine. I believe I should: Select FINALIZE then YES. But I never get the TOP MENU. Can someone help? (323)956-4596
Answer
2015-06-05 08:18
Candace Moliken
GY-HD200/250U:
We are recording in an indoor horse arena and we are getting blue and yellow spots. If you shade the lens they go away we think it is the white balance. Can you run me through white balancing this camera or give me some direction on what the problem is? 6/5/15
Answer
2015-06-18 15:49
Scott Simpson
Blu-ray Recorders:
Will SR-HD2500US playback commercial Blu-ray discs, ie; movies & concerts? S2
Answer
2015-06-19 12:35
Aleksandar Mitreski
Analog Security Products:
I want to update firmware on dvr vr-616. How can I get new firmware file and resolve the problems with my dvr?
Answer
2015-06-29 21:40
Neels
FAQ pages:
My 48 inch led TV (JVC) NOT SWITCHING ON
Answer
2015-07-04 04:38
chirag
D-ILA Projectors:
my jvc rs 50u warning light stedy and yello light blinking what could possibly wrong and how to fix it
Answer
2015-07-04 04:41
chirag
D-ILA Projectors:
my jvc rs 50u lamp light is bliking and warning light stedy what to do
Answer
2015-07-20 12:08
Arseny
GY-LS300 Super 35 4KCAM:
What is the sampling rate of the color camera used in a 4K 150 Mbps mode (SD-card recording)?
Answer
2015-07-31 17:15
ALFREDO AGUILLON
GY-HM70U:
have a camera JVC GY-HM700U which no longer turns but the fans work
Answer
2015-09-30 21:32
Gary
GY-HM200/170 4KCAM:
I have a problem with my JVC GY-HM200U. Purple Mud. https://youtu.be/Fxkaj8uorGY Camera settings - the factory. WDR - off Firmware V0106-0096 (June 2015)
Answer
2015-10-01 07:45
Guillaume Petitcollin
GY-HM150/100:
I have a dead pixel. What is the procedure to enter service menu and do pixel compensation ? Regards.
Answer
2015-10-16 07:49
Justin
GY-HM600/650:
It says on the site that AT&T U313 air cards are compatible, but when I launch the connection wizard, all it says is "apply". In the manual it says I should be able to enter the wireless information. Any ideas on how to fix? Do I need another air card? Thanks!! Justin
Answer
2015-10-17 11:57
Brittany
Pro Cameras:
My camera says my SD card is incorrect, it is a new card and it won't let me record, why is that?
Answer
2015-11-07 03:25
Behzad
GY-HM200/170 4KCAM:
Can the HM-200 or HM-170 Quicktime file format be read by any NLE on a PC or a Mac, or can it be read only by FCP Pro on a Mac?
Answer
2015-11-21 11:58
Andy Browne
GY-HM200/170 4KCAM:
I have a Rode LAV mic that requires 1.5 volts from the camera to operate. Will my HM 170 support such a mic? If so, how can I generate the 1.5 volts at the AUX jack.
Answer
2015-12-22 11:29
James Mullins
Analog Security Products:
How do I transfer data form a vr-d1016-1tb DVR to a USB thumb drive?
Answer
2016-01-15 21:20
Earl Nanhu
Blu-ray Recorders:
I have the JVC SR-HD2500US and it won't format the BlueRay Discs. The format window pops up and when I click on it nothing happens. It use to work, not sure what changed. Please help!
Answer
2016-01-18 10:34
Brian Knoblock
GY-HM600/650:
Why does the camera produce an XML file for each clip? After the clips are transferred to the computer from the SD card it takes a lot of time to then pick out the individual video clips from among the XML files for each clip - you have to click on each one separately instead of being able to select all- when importing into the editing program. Is there a way to stop the XML files from being produced?
Answer
2016-02-10 21:19
William Schelhas
Blu-ray Recorders:
I have 2 SR HD 1250. Recorders. We use them to record Village Board and Commission meetings. For almost 2 years, we have recorded on the HDD and then dubbed the meetings to DVD-R for distribution and broadcast. 2 days ago, BOTH machines developed a problem. Now, when I go to make my copies, they don't record completely. I have confirmed the HDD copies ARE complete but when Dubbing, they get to about 50 or 60% and the machines shut down and reboot, leaving the copies incomplete and unfinalized. I haven't, yet, tried to dub to another format. Does anyone know why this would happen or what is causing it. As I said, BOTH of our machines started doing this at the same time.
Answer
2016-02-12 09:25
Ulysses E Campbell
GY-HM700/710/750/790:
Is there software you can recommend that will allow me to repair damaged MOV files that were shot with the GY-HM700? The files are no longer located on the SD card on which they were shot.
Answer
2016-02-26 07:27
Matthew Ferreras
GY-HM600/650:
We are trying to connect the camera to a datavideo switcher SE600 using a coax. Unfortunately, we just see static on when connected to the input. Do we need to replace the coaxial cable? Is there a specific coaxial cable compatible for the camera? Thank you for your response. :)
Answer
2016-02-29 07:59
Tom Hirano
GY-HM200/170 4KCAM:
When I zoom in real slow, the object loses focus until I stop the zoom operation. This happens only when I disable full-auto. Are there workarounds or settings to overcome this problem? Thank you in advance.
Answer
2016-03-09 18:15
Steve Wiltsie
GY-HM200/170 4KCAM:
My new HM-200U won't record sound. The internal and shotgun mics show activity on the sound meters but nothing is heard during playback on the camera or on a computer. I updated to the newest firmware before using the camera and have tried 4K and HD recording to see if that made any difference. What do I need to do to be able to record the sound?
Answer
2016-03-11 13:05
Andy Finney
GY-HM700/710/750/790:
What is the ASA/ISO rating for the 1/3" CCD sensors in the GY-HM700?
Answer
2016-03-11 13:06
Andy Finney
GY-HM700/710/750/790:
What is the ASA/ISO rating for the 1/3" CCD sensors in the GY-HM700?
Answer
2016-03-24 06:42
Mark Adcox
D-ILA Projectors:
Does the JVC GY-LS 300 have a variable zoom speed or is just slow, medium, fast speeds?
Answer
2016-03-25 08:44
Cory Plummer
Reference Series:
Will the projector be recognized as a 4K/UHD display for streaming services such as Netflix and Amazon? I understand a separate device (Smart Blu-ray player, Roku 4K) is required, just didn't know if the services would see the projector as a compatible display.
Answer
2016-04-18 09:37
Ray Preis
IP Security Products:
How do I reset a JVC VN-H237U IP camera back to the default IP address - 192.168.0.2?
Answer
2016-04-20 18:47
John Pantazopoulos
Combo Decks:
I have 2 X DVM-700. The hard disk of one of them is defected and always I have the indication "Please Wait". My profession is Electronic Engineer and it is easy for me to replace the disk. I bought a new one. In which system I must format the new Hard Disk? The ext2 or ext3 of linux is OK? Except "format" what else I must to do? Tahnk you very much - John
Answer
2016-04-25 14:55
John Knutson
GY-HM150/100:
Does the HM150 have a dead pixel compensation feature like the 700 series?
Answer
2016-04-28 10:26
Mary Anne Funk
GY-HM850/890:
Hello, I will be using the JVC GY-HM850 to livestream an event. I am using livestream.com for airing the stream. I am not finding any information on how to set it up to use it specifically for livestream.com I have an approved wireless adapter and I know how to connect the camera to my laptop for controls, however, I just don't know the step for using it with livestream.com Is there any instructions on what seetings to set on the camera for using locations such as livestream.com, youtube, and ustream.com? Thank you for your time Mary Anne Funk
Answer
2016-06-07 07:13
ronald czarnecki
D-ILA Projectors:
Is there a mobile DOF calculator that can help understand the distance of focus when zoomed in?
Answer
2016-06-17 12:31
Leon Widhalm
GY-HM700/710/750/790:
what are the camera settings needed to use IEEE 1394 port with a BMS wireless transmitter for in house live pictures of events. BMS model:CT2200 HDV. I know you can't use (HQ) setting in record format or the IEEE won't send a signal. Tried various settings and still no picture being received from the camera, any help would be wonderful.
Answer
2016-06-30 05:45
Ronald Czarnecki
GY-HM200/170 4KCAM:
Is it possible to get meta data from the 170u about white balance, F-stop, Shutter, focus settings, and assisted focus?
Answer
2016-06-30 20:36
vincent mcgivney
GY-HM600/650:
I bought this camera in August 2014. Was I supposed to download a new firmware update? Or am I ok?
Answer
2016-08-02 14:25
Sarah Thompson
GY-LS300 Super 35 4KCAM:
Is there a service manual available for this camera?
Answer
2016-08-11 12:57
Mike Allen
GY-HM200/170 4KCAM:
Is there a setting to allow the Dynamic Zoom feature to output the camera video through an HDMI cable to a monitor?
Answer
2016-08-30 08:37
Garen Johnson
Reference Series:
I have a RS57U. The projectors works flawlessly with Comcast input. When I switch to PS# or brand new Sony Blu-ray player picture is zoomed in to the upper left 1/4 of the DVD screen? Player works perfect on other TV's, and have changed HDMI's, and even used same input and wires as cable TV and will not scale correctly? Reset both units, checked all screen settings, to no avail? Thanks, Garen
Answer
2016-09-20 10:31
Joseph M Armillas
GY-LS300 Super 35 4KCAM:
What is the highest capacity memory card that can be used on this camera? 128 Gigs, 256 Gigs?
Answer
2016-09-20 14:09
mark hawley
Blu-ray Recorders:
How do you get Jvc 1350 to record 16:9 instead of 4:3?
Answer
2016-10-02 14:58
HENCHOZ Daniel
IP Security Products:
Hello, How can reset the password of my camera JVC VN-V686BU. Best regards Daniel
Answer
2016-10-06 13:43
cuong bui
GY-HM600/650:
I have GY-HM750U camcorder but Iris auto not working, I need to manual iris ring by hand, how can I make it right. Thanks
Answer
2016-12-01 14:40
Evan Staples
Reference Series:
I can't turn on my projector without unplugging from outlet and then replugging in. The red light is on when turned off, but the remote and power button on the unit fail to work until it is unplugged and left out of the outlet for ~10 seconds. Is there a fix for this? I'm guessing a power supply issue of some sort? Thanks!
Answer
2016-12-22 12:27
Albert Chester Jr
GY-HD200/250U:
Window 7 drivers for this camera, please.
Answer
2017-01-05 11:27
philip
D-ILA Projectors:
I just got one of these cameras. video works great on camera but i cant convert or play it on my PC. manual is full of useful things for a person just starting out with camcorders but it doesnt have an answer to this. i downloaded the software JVC ProHD Clip Manager as it stated but im not able to export the clips (i presume this is how you convert it) i just want one simple file i can watch on pc and edit with moviemaker.
Answer
2017-01-15 08:11
Joe Sawyer
D-ILA Projectors:
I have a jvc projector, model # dla-rs1x-u, serial # 063B0151. After a period of usage ranging from 1/2 hour to ~8 hours it will shut down. It goes completely dark, seemingly have no power as all lights on the projector are off and the image is blank. There is power at the outlet. The fan on the projector works when it is on but also shuts off when the projector shuts down. After 1/2 to 1 hour the projector will come back on and function again for another 1/2 to ~8 hours. I have replaced the lamp, trying 2 separate new lamps. I have also cleaned the air filter. Is there anything else I can try to stop the problem or will this require a repair?
Answer
2017-02-01 08:42
Charlie noe
D-ILA Projectors:
I have a jvc d-ila procision projector. I swapped the extender feeding hdmi 1. When the projector went to sleep the lens door closed and will not open.
Answer
2017-02-26 14:13
Marc
Reference Series:
Regarding the JVC DLA-RS400U projector, does using the lense shift effect the picture quality in the number pixels displayed? I know lighting will be effected slightly. Is it a mechanical shift or a digital shift? Thanks.
Answer
2017-03-03 14:54
Wally
GY-LS300 Super 35 4KCAM:
What is the DC input positive/negative configuration. (ie Is the center positive and barrel negative?)?
Answer
2017-03-07 19:42
Stewart Furches
GY-HM200/170 4KCAM:
I just updated my camera from original firmware version to 0305-0182. Does the 0305-0182 version include all the enhancements done in the previous firmware updates?
Answer
2017-03-22 09:59
Aaron Simon
Combo Decks:
I have a sr-dvm600. Once I record a session and it saves on a DVD, how can I watch it on a computer or dvd player?
Answer
2017-04-10 12:15
Chad
Blu-ray Recorders:
I have a SR-HD2700. I am able to copy content to the HDD just fine. When I try to copy content on the hard drive to a Blu-ray disc I end up with a disc that is blank. There are no error messages during the dubbing setup process. I get the select ok message at the end telling me the dubbing completed successfully. When I try to read (watch) the disc it does not have anything on the disc? This does not happen with all content only certain titles.
Answer
2017-04-13 05:50
Max Lofti
D-ILA Projectors:
Hi, I have a dla RS4810u serial number 177B0138. The unit was working great for the past 2 years. Now, the hdmi port works on apple tv but it doesn't work on my receiver. I have switched to different hdmi cables and many different devices blu ray, dvd player, another receiver, etc. It doesn't work. It works only on Apple TV. And, on Apple TV, it works with some apps such as youtube and CNN. But when I try to watch Netflix or HBO it tells me that it has issue with HDCP and can not show contents. Please let me know what do I need to do. Thank you.
Answer
2017-05-19 15:37
Kelly Phillipps
Combo Decks:
I have an SE-DVM600, when I plug it in the three red "rec" indicators light up for less than half a second then go dark and no other display comes up. I have to leave it unplugged to even get this results. If I unplug it and plug it back in immediately it is always dark. Any advice or assessment would be welcome.
Answer
2017-05-28 13:47
Jamal Jones
GY-LS300 Super 35 4KCAM:
How do I find and turn on and use the 120fps setting on the JVC GY LS300? Where in the menu can I find it?
Answer
2017-07-14 15:07
Kevin mcgrath
4K Camcorder:
I have a dead pixel in my jvc gy hm 170 Does anyone know how to to turn on pixel compensation
Answer
2017-07-24 11:41
Kwame
GY-HM600/650:
What is the maximum throw in feet, will the lens cover. (90 to 200ft)
Answer
2017-08-01 06:33
Patrick Charest
D-ILA Projectors:
How do I hard reset a DLA-RS4910 to its original factory settings?
Answer
2017-09-10 00:34
Makonnen Woldemichael
GY-HM200/170 4KCAM:
How can I avoid the Purple Mud on my HD shootings by my GY-HM170 camera
Answer
2017-09-11 07:08
siderakos
GY-HM200/170 4KCAM:
dear, i would like to inform me how to adjust the back focus
Answer
2017-10-02 16:29
Howard Allen
GY-HM200/170 4KCAM:
I need to know how to set the timecode so that I can see the actual duration of a clip or the running time of a clip as it is being recorded.
Answer
2017-11-02 14:00
HENRY STEWART
GY-LS300 Super 35 4KCAM:
Will any Lanc controller with a 2.5mm plug work with this camera.
Answer
2017-11-12 16:51
Dennis Davis
GY-HM600/650:
GY-HM600U Camera will not turn on. I have two GY-HM600U cameras that I bought at the same time for two camera live switching production. They have consecutive serial #s. Purchased may 2015. The one camera with Serial #07040903 will not turn on. I have checked power supply and battery. They are okay and operable. Thanks for any help.
Answer
2017-12-05 16:44
Dave Kendall
GY-HM850/890:
I'm looking for information about how to do a firmware update. Where could I find that?
Answer
2017-12-13 15:07
Marty
GY-HM600/650:
Can you tell me the procedure for adjusting the back focus on a GY-HM650U?
Answer
2017-12-22 04:45
Senate Moshesh
Flat Panel Monitors:
Hi there, I too have had a JVC LT-32N630S for about four years and it hasn't worked for about half that time. Its stuck on the JVC logo screen, how can I resolve this?
Answer
2018-01-17 04:54
Pierre Versleijen
GY-HM150/100:
Hi, I have a GY-HM100. Can I shoot a time lapse with it? Thanks for your answer. PV
Answer
2018-02-12 23:40
Dominic
GY-HM150/100:
1. What is the latest Firmware version available for the GY-HM100U? 2. Does the HDMI output send 1080 in real time, in the options it looks like the highest you can set it at is 720. But in the tech specs it says 1080 3. When I try and look up firmware updates for the camera and key mine in CAM: 109, ARM 105 & EEPRROM 052 I get a message unable to determine current version.
Answer
2018-03-02 11:06
antonberakovic
Pro Cameras:
hello! I wonder whether it is possible for the camera GY HM-750 using memory card 64GB. Thank You,Anton.
Answer
2018-03-02 18:39
Sean Salas
GY-LS300 Super 35 4KCAM:
How can I get a rubber eye cover and the hand strap for the GY-LS300? I bought a camera off ebay without these two parts and would like to buy them if I can. Thanks so much. Sean Salas PS this is my second GY-LS300 camera and I love it!!!
Answer
2018-03-30 08:53
Joe
D-ILA Projectors:
How can I get a user manual for my MX-C5 Compact Component System
Answer
2018-04-10 06:01
Joe McCormick
GY-HM200/170 4KCAM:
I have both a HM200 ad a HM170. Both record using a .mov file. Using Sony Vegas Pro for editing. No issues at all with the 200 but anytime I use the 170 I have to convert the files using a 3rd party program to another format (like mp4) otherwise it locks up my computer. All the settings appear to be the same but just wondering if I am missing something.
Answer
2018-04-23 09:51
Lynne Jones
GY-HM700/710/750/790:
New Sandisk Extreme Pro SDXC UHS-1 Card 64gb is not recognized by my camera. States Incorrect Media. Found on web the firmware update. Will updating prevent us from using older cards? Thanks
Answer
2018-04-30 20:58
JohnSimmons
Blu-ray Recorders:
I have a JVC SR-HD1500US. I just started having problems dubbing video from the HDD to a blank DVD. When I get everything set to dub and press "Start" the recording light comes on and the video shows up on the monitor for a seconds and goes off. Sometimes the video blinks twice before it goes off. The unit indicates it is still recording but a few seconds later i get a message on the screen that "Recording Is Complete." This problem doesn't happen on every dubbing i attempt but is getting more frequent. I appreciate any help you can give me. Thanks...John
Answer
2018-05-03 01:24
Arif Siddiqui
GY-HM700/710/750/790:
Our JVC GY-HM700 Control switch Ring blinking Red its LCD delay ON & a message (Turn Power Off Turn Back On Later) shows on LCD, Menu switch is also not working
Answer
2018-05-06 12:36
bal
GY-HM600/650:
how I enter rtmp in the server
Answer
2018-05-18 15:25
Paul Berg
Reference Series:
Why, after using the 121 position sub-pixel convergence do several test signals, such as gray field and 2 pixel wide vertical bars, show a blotchy green tinge?
Answer
2018-06-16 11:32
kostas1987
GY-HM700/710/750/790:
my JVC 750 doesnt turn on. Only a flash in rec light apears and nothing more. Any idea whats going on?
Answer
2018-06-22 06:17
Robin
Sports:
I have updated my camera with the new firmware, yet I'm unable to locate the hockey overlay. Also, when zoomed in, the edges are very blurry. Is there a way to fix this? I own 7 of these cameras, and they are all the same. Thanks
Answer
2018-06-26 12:13
Clayton Raymond
GY-HM200/170 4KCAM:
SanDisk Extreme Pro 128 GB 95mb/s UHS-1 U3 gets incorrect after inserting SD card.
Answer
2018-06-26 12:18
Clayton Raymond
GY-HM200/170 4KCAM:
SanDisk Extreme Pro 128 GB 95mb/s UHS-1 U3 SD card gets incorrect when inserted.
Answer
2018-07-06 23:04
Petter
GY-HM200/170 4KCAM:
I wonder if the HM series like 4K 250/200/170 as well as the older Pro HD HM150 does rec triggering by HDMI flag on the HDMI output to enable start-stop of external recorders?
Answer
2018-07-16 19:20
Armando Soto
GY-HM150/100:
I read of another reader that his ND filter was stuck on "ON" even if the button was on off. It went away on it's own. In my case, it persists along with the focus ring not working on manual focus while the camera is on Manual and Manual Focus. It only zooms. I was suggested to re install the firmware update. I already got the camera settings to default and rebooted, but it did not change anything. Where can I get the firmware update and do you think it will help?
Answer