Pro Cameras » CONNECTED CAM Series » GY-HC900 2/3-inch

ID #1396

How do I restore Zixi Protocol on my GY-HC900U?

You need activation FIRMWARE_CHG2_ZIXI file copied to a blank SD card. Connect AC adaptor.  While camera is powered off, press and hold ONLINE/5 + CAM/MEDIA buttons together. Turn on the power and keep holding the 2 buttons until the message “Please Insert Update Media in Slot B” appears. Insert SD card to Slot B and activation starts. When completed, eject SD card, momentarily remove AC adaptor to reset power. When power is reapplied, verify ZIXI is present from Menu > Network> Live Streaming > Streaming Server > Live Streaming Set > Server1 > Type. (Note: Both Zixi and SRT protocols cannot coexist in the same camera)


Last update: 2020-04-24 13:09
Author: Jim Vicente
Revision: 1.0

Print this record Print this record
Send to a friend Send to a friend
Show this as PDF file Show this as PDF file
Export as XML-File Export as XML-File

Please rate this entry:

Average rating: 0 out of 5 (0 Votes )

not useful 1 2 3 4 5 most valuable