Pro Cameras » CONNECTED CAM Series » GY-HC900 2/3-inch

ID #1395

How do I activate SRT Protocol on my GY-HC900U?

You’d need to do 2 things to activate SRT. First, check the firmware version of the camera from Menu > System > System Information. It should be v0300-0250 or later. If not, download and apply latest firmware. After update, you need activation FIRMWARE_CHG2_SRT file copied to a blank SD card. Connect AC adaptor. While camera is powered off, press and hold ONLINE/5 + CAM/MEDIA buttons together. Turn on the power and keep holding the 2 buttons until the message “Please Insert Update Media in Slot B” appears. Insert SD card to Slot B and activation starts. When completed, eject SD card, momentarily remove AC adaptor to reset power. When power is reapplied, verify SRT is present from Menu > Network> Live Streaming > Streaming Server > Live Streaming Set > Server1 > Type. (Note: Both Zixi and SRT protocols cannot coexist in the same camera)

Last update: 2020-04-24 13:07
Author: Jim Vicente
Revision: 1.0

Print this record Print this record
Send to a friend Send to a friend
Show this as PDF file Show this as PDF file
Export as XML-File Export as XML-File

Please rate this entry:

Average rating: 0 out of 5 (0 Votes )

not useful 1 2 3 4 5 most valuable