IP Security Products

ID #1042

1.) Is the VR-N900U compatable w/ the Panasonic WV-NP1004? 2.) What are the VR-DO part number/model numbers for the sizes i.e. 500GB, 1TB, 2TB?

1. Yes, VR-N900U can be compatible with Panasonic WV-NP1004. Please download XProtect Device Pack v 3.1 from Milestone USA site (http://www.milestonesys.com/Downloads) and install it using the procedure describe in the user manual. After reboot, VR-N900U will provide support for WV-NP1004. Please be advice this camera should be manually added to the system (discovery mode do not work for Panasonic cameras). Please follow the instructions how to add camera manually.

2. There is only one part number for VR-D0, since the unit comes with 0 (zero) HDD storage installed. The system integrator/end user has to populate the VR-D0 unit with hard drives.

Please pay attention to the following:

a. Total storage capacity per VR-D0 can NOT exceed 2 TB (do not install 4 drives 750GB each. You would not get more than 2 TB!)

b. Hard drives have to be installed in pairs of equal size and maker.


Last update: 2008-11-24 07:38
Author: Adrian Parvulescu
Revision: 1.2

Print this record Print this record
Send to a friend Send to a friend
Show this as PDF file Show this as PDF file
Export as XML-File Export as XML-File

Please rate this entry:

Average rating: 0 out of 5 (0 Votes )

not useful 1 2 3 4 5 most valuable